Search results

  1. SLOW 97

    PI swap mods

    The AFM Powerpipes are pretty good. All the mods you listed would work well after the swap. They wouldn't do much for a stock car though.
  2. SLOW 97

    351w in 2000 Mustang GT body

    Just so you know everything will work fine. But there's so many things you need to do this it will cost you a small fortune and you will basically be rebuilding your car. My adivce, mod your 4.6, or buy a Fox and do the Windsor swap to that because it's possibly the easiest engine swap I can...
  3. SLOW 97

    Doing the brakes myself.....HELP

    As for pads go with the OEM Ford pads. They will be the quietest. Unless you want a higher performance pad. Then I'd recommend the EBC Greenstuff. Those are pretty good pads. Stay away from the parts stores like NAPA, Autozone, Carquest, etc. Also, make sure you put some High temp silicone on...
  4. SLOW 97

    Doing the brakes myself.....HELP

    You're going to need hex drivers for the caliper bolts. It should be straight forward enough and basically the same as your fox. Heres a good tip, use line locks to clamp off the brake hose and then open the bleeder screw and compress the caliper using the old pads and a C-clamp. This will keep...
  5. SLOW 97

    Spring Compressing tool

    Yes, I third that. GET IN THE ZONE! Ehh ok,that was lame. Anyway, ask for a valve spring compressor. Like said its free you just need to leave a deposit.
  6. SLOW 97

    285/35ZR-18 too big?

    Yep they'll definitely rub. My drag radials used to rub on the fender well and my exhaust and they were only 275's. So i would assume they would rub in the front on your car. But it will depend upon the offset of the wheel you are using. The '03 Cobra wheel looks to have a decent ammount of...
  7. SLOW 97

    Just got off the phone with Jegs about a Hammer Shifter

    First off, shift kits are NOT harful to your trans. In fact the increase clutch band and clutch pack life. Quicker, firmer shift= less heat created. Also, shift kits are cake to install. As for manual valve bodies, they arent not for the street and neither are most street/strip valve bodies...
  8. SLOW 97

    Intake 4.6L

    The Bullitt is a ripoff and will probably get you 5rwhp. The PI intake is cheap and Livernois Motorsports has a kit to make it work with the teardrop shape ports on the 96-98 heads. This mod has been worth 20rwhp on an otherwise stock Non PI car. And I believe its under $400 for the kit.
  9. SLOW 97

    O2 Sensors

    Amperage isn't really important w/ O2's. Like its been stated the range is roughly 0-1v. I'm pretty sure we have zirconia O2's which produce a voltage, not modify it like titania O2 sensors. But if you want, you can use a T-pin and backprobe them with a meter. That should give you an idea whats...
  10. SLOW 97

    Intake 4.6L

    Save your time. It will fit though.
  11. SLOW 97

    Did all Mustangs from 94 + w/ power locks come with Keyless Entry Remotes?

    No they didnt. PATS (Passive Anti Theft System) becames standard in '97 which uses the keyless entry. So no, not all '94-up cars have it.
  12. SLOW 97

    Official Tremec 3650 Issues Thread

    I don't care what kind of tranny it is. Every stick car I've ever driven has a hard 1-2 shift when it's cold. That is because the gear lube is very high viscosity and when it's cold it will be like sludge and it will be hard for the tranny internals to move and mesh together easily. The grind...
View older results
Top Bottom
Back
Forums
Menu