Search results

  1. Immortal LuD

    Radiator Hose Buldge

    After putting over 1,000 miles on my '96 Stang in the past week, I washed, and hand waxed my car, and happened to pop the hood and find a buldge in my top radiator hose. I've had this happen before, and it was pressure in the system, and after opening the cap, and having radiator fluid shoot...
  2. Immortal LuD

    leaky gas tank

    Mine has this problem right now, and I've had the gasket that I bought from my Ford dealership forever now... Just haven't had time to run the gas tank down and do it... Part number #F4ZZ-9072-DA by the way. I like smelling gas every time I'm getting out of my car, although I would rather...
  3. Immortal LuD

    Needle Adjustment to Default

    Hey guys... I recently just fixed my odometer/tripmeter, and I'm just a little paranoid thinking that my gas needle, and perhaps the temp/oil pressure and voltage meters may be off. What is the best way going about, making sure that these are accurate readings? The most important to me is the...
  4. Immortal LuD

    Lowering Problems

    I went ahead and swapped the camber plates the other day... I could do it with the car sitting on the ground... The only thing I needed to do, was jack up the car so I could spin the tops of the struts around, so the two screws that are used to adjust the camber, would go side to side. I can...
  5. Immortal LuD

    1996 V6 Offroad H-Pipe?

    Now I just have to find somebody that has the f'n balls to do it! ;) I know that someplaces would overall charge less to have them install their own offroad h-pipe, and that's fine... But if I can get the MAC h-pipe and have them install it for the same price, then that's even better. I just...
  6. Immortal LuD

    1996 V6 Offroad H-Pipe?

    Good video... Here's mine. http://www.youtube.com/watch?v=3YNF2eN9peo I do know that MAC has the off-road H-pipe for my vehicle, (a good damn price too!), but the problem is that I already have the bolt-on y-pipe catback kit, and it won't match up. I even contacted MAC to see if it would work...
  7. Immortal LuD

    Lowering Problems

    Pretty good documentation. I do love that, but unfortunately, my camber is just way to negative to be good... I don't want the extra wear and tear on my tires, plus, the rubbing is a bummer. I'll be taking care of this by myself soon. I'm not even going to bother going back to those...
  8. Immortal LuD

    1996 V6 Offroad H-Pipe?

    I was under the impression that the emission laws were more strict in Kommiefornia, New York, and Washington DC... (Obviously.), but not here in Florida. Is there any documentation that proves this? And from what I've heard, off road h-pipes make V6's sound a whole lot better than anything...
  9. Immortal LuD

    1996 V6 Offroad H-Pipe?

    Hey there guys... Right now I have a bolt on MAC catback exhaust system. It bolted right up to the y-pipe, and it is the best exhaust setup I've heard on a 94-04 V6 Mustang, and it has rounded edges on the pipes... It's definately the sexiest looking as well. My question is, how would I go...
  10. Immortal LuD

    Lowering Problems

    But I can do this with the car on the ground, right? I just didn't want to have to jack it up... I didn't know if the strut would pop up through the strut mount or whatnot. If so, I'll have to do this later today with some help. Getting that strut nut off is a bitch sometimes!!! My impact...
  11. Immortal LuD

    Lowering Problems

    Hey, I need your help really quick... I went up to the shop, and basically a few of the guys were arguing about trying to get it done today, and it came down to them not being able to get it done until Saturday... Well, I work all week. So basically I gave them the whole story about how...
  12. Immortal LuD

    Lowering Problems

    About the caster, I was reading an article explaining what it does, and I was really dumbfounded. I had no idea what they were talking about... Something having to do with the wheel straightening out when coming out of a turn, etc...
  13. Immortal LuD

    Lowering Problems

    Well, I guess that makes me special. *sigh* My engine bay is usually kept a lot cleaner than it is now... Here's a pic or two. I normally try to keep everything in good order, but not having a garage to put my car in every day, is taking a toll on the paint job... The top of...
  14. Immortal LuD

    Lowering Problems

    Just thought I'd throw a few more pictures in... Here's a few from where my wheels were/are rubbing... This if my front right wheel, and rubbed away part of my wheel well or whatever it's called... And now where it's currently rubbing, and making noise when I turn the wheel...
  15. Immortal LuD

    Lowering Problems

    What does the caster actually affect? Isn't it just how far the wheel goes forward or backwards?
  16. Immortal LuD

    Lowering Problems

    Well yeah, he machined it, to where he could slide the plate over more towards the fender, since the tab was touching it... Pfffft... If you look close at the pictures of the plates, you can see where it's done.
  17. Immortal LuD

    Lowering Problems

    Well no not really... This is the weird part. Again, according to the MAC instructions that came with the plates, they installed them right... BUT, he didn't use them from what I understand. I called MAC, (best customer service ever), and talked to a very nice lady that told me which way...
  18. Immortal LuD

    Lowering Problems

    The agreed to fixing the problem with no labor charge. We'll see how that goes tomorrow... Hopefully I won't have any problems with this crap again. ;)
  19. Immortal LuD

    Help with dash clock

    Ok cool, btw, is it easy to remove the pod???
  20. Immortal LuD

    Lowering Problems

    I've never been in a single car, my whole life, that has made as much noise as mine when going over bumps, turning, and driving. It's not normal.
Top Bottom
Back
Forums
Menu