Search results

  1. perkys stang

    Can you run 12.5:1 compression on pump gas?

    Yeah I wouldn't want over 11:1 with 94... I have seen some guys try higher compression and the cars won't even start on pump gas.....
  2. perkys stang

    custom ground cam

    Email Ed at FTI.... www.flowtechinduction.com
  3. perkys stang

    FTI cam story

    Yep.. even has the company Moto on the back... TALK IS CHEAP...!!! I got a couple.. hehehe Have to catch him at Maple Grove if he makes it up there...
  4. perkys stang

    Carlisle June4-6

    Yep... NMRA event at the Grove.... that's where I will be...
  5. perkys stang

    moser axles

    You would use the stock size axles bearings and re-use your stock c-clips.. This is assuming you bought c-clip axles and not race axles which require c-clip eliminators.
  6. perkys stang

    Need help picking a good OTS cam..

    Mike, I have the prefect cam at the house for you.. It's a FTI Grind.. I think it would work well for ya...
  7. perkys stang

    Why did my 1/4 ET go up after mods?

    I am just amazed you are still alive... LOL.. Damn it's been forever...
  8. perkys stang

    question about the victor 5.0

    I think you can run it if you are using a EGR spacer with the TB. If you are not running EGR spacer and use the throthle cable bracket I think it would be a tight fit and not work. What I do with mine is get a adapter fitting for the intake hole to the sensor and stick the sensor directly in...
  9. perkys stang

    Sell my TF Twisted Wedge heads for AFR165s? where should i sell?

    They are nice but the TW's make some sick power....
  10. perkys stang

    hows this sound?

    231.999999999999999999999999999996666666555567
  11. perkys stang

    lx front coils

    As far as I know the 4 cylinder spring is a 4 cylinder spring.. They should work for ya..
  12. perkys stang

    Harland Sharp or Comp Cams Pro-Magnum?

    if you don't want to spend the extra bucks on the jesel's I would just get the Scorpion Roller Rocker's.. I had those on my car last year and they worked great.. Swapped them out for Jessel but I really like those rockers... Call ED back and order a set!!!
  13. perkys stang

    any of you guys runnin kooks headers?

    89 with a mini starter
  14. perkys stang

    Belt squeels WHY???

    I know I needed a shorter belt... I ended up with a 28-7/8 :D
  15. perkys stang

    whats the stock fuel pressure supposed to be at idle and WOT ???

    I go down the track with 42.. 40 is fine unless hi combo requires more fuel... Only thing I can suggest is to yank the vac off and bump it a couple psi and see if it helps.. When you pull the vac off remember what the FP was so you can return.. Best way would be to tune the car with a...
  16. perkys stang

    Belt squeels WHY???

    sounds like the belt is not tight enough... Where is the pointer on the tnesioner? Maybe the tensioner is just weak...
  17. perkys stang

    Struts and shocks for auto x, drag, and street?

    I like the strage or basically any adjustable strut would be ok for all 3 but it's hard to get soemthing that is prefect for all 3.. Gotta give it up somewhere
  18. perkys stang

    any of you guys runnin kooks headers?

    I run Kooks on mine and the fit is like no other... The fit great.. They are a little lower then the BBK LT but higher then the bassani's.. I have had all 3 plus MAC ;) 1-3/4 isn't to big... they will work fine.. biggest thing to remember is the 600+ dollars on the Kooks is uncoated/bare so...
  19. perkys stang

    whats the stock fuel pressure supposed to be at idle and WOT ???

    Base pressure is in the mid/high 30's I am thinking 36-38.. The proper way to check the FP is to remove the vac line going to it as it will drop at different rates depending on the amount of vac. the car is pulling... I think it's fine where it is..
  20. perkys stang

    Msd distributor ?

    The issue you are refering to commonly happens when a ARP oil pump driveshaft is being used. If you are using a different shaft I have never seen the problem happen.. On another note I have never gained anything by using a MSD and I saw Zero HP increase or decrease between it and stocker.. So...
Top Bottom
Back
Forums
Menu