Search results

  1. perkys stang

    do you think i shift before 60'?

    spinning is the enemy....LOL remember you want lower 60's... I got some ideas but you need to bring the car out and maybe grab a part or 2.... I saw some FS cars go high 1.6's at 3500-4000 on BFG DR's I know you car will go faster just need to push it a little more...
  2. perkys stang

    Tweecer needs wideband O2 to work right?

    The wideband option will give you instant and correct readings compared to the stock SLOW response of the stock sensor.. You can change whatever you want timing and fuel but if you want to log the A/F to make adjustments then it will not give you timely reading to make the changes without a...
  3. perkys stang

    Torque Box Damage, how bad?

    WTF!!! Bad is a understatement....
  4. perkys stang

    How to hit low 11's/high 10's NA?

    N/A :confused: ;)
  5. perkys stang

    How to hit low 11's/high 10's NA?

    I think your numbers are a little high.. I know what some of the faster PS cars run 10.50/10.60's are making I have seen the sheets.. and PS car weighed in at 3150 last year and 3100 this year Here are the raw numbers from my car last year..... 3125lbs 11.12 @ 120.7 RWHP 370 with 60' of...
  6. perkys stang

    Backlash at .003 place your bets.

    .008 to .015 is the spec.. I try for around .010 .003 is way to tight and when the gears heat up I see trouble...
  7. perkys stang

    How to hit low 11's/high 10's NA?

    I just got this a couple days ago.. Check it out... http://home.comcast.net/~wicked46/Perk1112.wmv Thanks to wicked4.6 on RacersDen!!!!
  8. perkys stang

    anyone think i'll hit the 12's with my minimal mods?

    yes.. and if you don't want to go over a hour you just tell them
  9. perkys stang

    anyone think i'll hit the 12's with my minimal mods?

    I know ?I would if I were you.. Ever car can benefit from it one way or another.. If not a piece of mind then you might gain some power or find you have been running the car to close to the edge.. It's 80 for 3 pulls with a/f or or you can pay 100 and get it for a hour which you could get 5...
  10. perkys stang

    anyone think i'll hit the 12's with my minimal mods?

    I think we should spend a 85 bucks and roll it on the rollers at Kauffman's and get it baselined.. This will tell us what we can do without wasting a day at the track.. let me know
  11. perkys stang

    How to hit low 11's/high 10's NA?

    With what you said I am going to say over 400 at the wheels would get some low 11's with that..
  12. perkys stang

    How to hit low 11's/high 10's NA?

    More displacement with the right combo will surely only help the goal... I left mine stock because I want to fit into local class racing for headsup which strokers are not allowed to run...
  13. perkys stang

    anyone think i'll hit the 12's with my minimal mods?

    Mark,, I think you can do it.. Just need to get out there more.. I also have a set of slicks sitting here for you with only 15 passes on them for a good price.. Right up your alley!!!! I think with new suspension parts and we get the rear set correctly it will 60's like a champ and roll...
  14. perkys stang

    How to hit low 11's/high 10's NA?

    With my 306CI FTI custom cam.... Lightly and I mean lightly ported TFS TW heads.. Stock out of the bax Holley SysteMax Intake... 10:1 comp... Went 11.12 @ 121 @ 3125lbs It's all in the combo... There is a big gap between low 11's and high 10's.. you need to pick on for your goal because both...
  15. perkys stang

    blew a head gasket

    :stupid:
  16. perkys stang

    How long have you had your tremmic?

    tremec :D
  17. perkys stang

    Making 42# Injectors workable N/A until the turbos are on...?

    Mike... Good Luck starting that PIG... You will have WAY to much fuel... Even with Turbo's you will need something to lean it out when cranking Give me a call and I can explain... Later bro
  18. perkys stang

    Holley Systemax 2 or Trick Flow?opinions

    No mix.. Just Match!! :bang: :banana:
  19. perkys stang

    Starter going, should I get a High Torque Mini?

    You can move the main power wire over but you don't have to ... the reason I leave it on the right hand side is so the main power isn't always live.. This is just me and I have never had a problem otherwise but you can move it or leave it.. I am refering to the 4ga power..
  20. perkys stang

    Holley Systemax 2 or Trick Flow?opinions

    When I first put my red lx together with TW heads, TFS Stage 1 cam and a Track heat intake with a C4 and 4.10's - 12.35 @ 108 Would have gone quciker with a 5 speed for sure.... i say get the best of both worlds and get the TF heads and a custom cam along with a Holley intake.. I went...
Top Bottom
Back
Forums
Menu