Search results

  1. Jerry Leaming

    Looks like the UPS guy gets around

    Good to know that 5.0 resto is selling APC products with out telling people... I will be sure to ask who the manufactureer is before I buy anything from them. If your planning on using them get some diamond headlights also... it matches the corners better. IMO
  2. Jerry Leaming

    Can someone identify this exhaust? (sound clips)

    Mac with a prochamber?
  3. Jerry Leaming

    Fuel Pressure: advice

    Does it have a custom programed chip? I would guess 42psi would be a good place to start with out a chip . Alot of times with a custom chip the fuel pressure needs to be 38-39 psi. Mine runs at 38psi but my chip compinsates for my all my upsized parts.
  4. Jerry Leaming

    Couple New Engine Pics

    :nice: Nice engine bay. :nice: Car does't look to bad either :banana:
  5. Jerry Leaming

    girdle's

    I got mine from Holcomb Motorsports. They usually carry a few in stock.......
  6. Jerry Leaming

    girdle's

    I agree....get a steel unit the Canton unit I have is nice.
  7. Jerry Leaming

    Which is best

    Never heard of anybody trying. But if a 460 will fit the 429 should also.
  8. Jerry Leaming

    White Faced Gauge...Feedback?

    I have NR white faced gauges. They look great during the day but very uneven lighting at night. Good thing its my weekend cruzer and not my daily driver otherwise they would get changed. Does Ford sell the cobra set or do you have to buy a full gauge cluster?
  9. Jerry Leaming

    Bought Baer Brake kit

    Yeah, what he said
  10. Jerry Leaming

    Installing Rockers - Zero Lash Question

    That sound right to me. They got loose after any extra oil in the lifter was bleed off. As long as you set them according to the manufacturers specs you shouldn't need to readjust them for quite a while.
  11. Jerry Leaming

    yesss!won my case in court!

    :banana: Great to hear. :banana:
  12. Jerry Leaming

    Idler Pulley

    It helps kept the belt under control when your engine is in the upper rpm areas.? I would imagine that it could flip off of the pulleys if it got a big enought whip, and I would be suprised it it took .01 hp away from the engine.
  13. Jerry Leaming

    Custom Plate Question...

    ISMLBCN :rlaugh: I smell bacon. I am in the same boat I also need new plates and are too trying to chose a new personalized plate. If you pick one.. Wa DOL has a web site that you can enter the plate you want and see if its available. I have a couple ideas but don't want anybody to steal...
  14. Jerry Leaming

    351w in sn95 with stock hood?

    If it was me I would only drop the engine, moving it back an inch sounds like you'll be opening a can of worms. The swap is difficult enough why make it any harder? If your getting a cobra hood there isn't many efi intake combos that wont fit especially with the drop mounts. Good luck
  15. Jerry Leaming

    Will my stock valve covers fit?

    The cobras are a different design than the 1.6's the cobras have the upper end of the rocker smoothed/tapered off to clear the stock vc's the 1.6's are wider and less tapered at the top(push rod end).
  16. Jerry Leaming

    Will my stock valve covers fit?

    You can also double up on the valve cover gaskets(helps a little) and if that doesn't work you can just enlarge the valve cover with a ball peen(spelling?) hammer. Just hit from the inside where it is rubbing with the hammer until it clears. You'll probably need to paint the covers after that...
  17. Jerry Leaming

    351w in sn95 with stock hood?

    331 cobra, The trick flow intake box is even taller than the trick flow r unit, if I recall right it was about 3/4-1" taller and a whole lot wider on the top side which from what I could tell would cause all kinds of fitment/clearance issues.
  18. Jerry Leaming

    351w in sn95 with stock hood?

    What kind of intake are you going to run? A spyder might fit, I used a trick flow r and there is NO way it will fit under a stock hood(same with the edelbrock). If you move the engine back a inch you will run into exhaust,tranny, and drive line fitment issues. If the engine goes back an inch so...
  19. Jerry Leaming

    What is the min. rpm u can activate nitrous?

    Moneypit94 is right...I use a throttle switch on mine. If you plan on running nitrous at the track you will have to get the feel for the switch and when it will activate. Normally I leave the line at part throttle and quickly ease into the gas allowing the engine to get above 3000 Rpm's before I...
  20. Jerry Leaming

    New Track Times

    Nice, Maybe this year I will work out all the bugs in mine and get to the 11's Sitting at 12.2 --119.5
Top Bottom
Back
Forums
Menu