Search results

  1. T

    Air Induction '04 GT 2V

    you have to be a little more specific. naturally aspired means that you do not have a supercharger or nitrious on you car. are you looking for a cold air intake or something like that.
  2. T

    Voulant

    I personally like the ones from www.jlttruecoldair.com They also paint them to match for the same price the volant cost. My friend had one on a supercharged silverado and he notice hardly no difference but then he went to airaid and he felt a difference. jmo.
  3. T

    porting and polishing heads

    what I am doing is trying out different types or port sizes and styles and puttingthem on a flow bench to see if the velocity will rise and how many more cfms they will push. You can laugh all you want but just because you don't have the brains to try something new doesn't mean that I don't.
  4. T

    Need advice on suspension parts

    yeah I have the steeda also and I like mine a lot. some a lot of people say you will feel a big difference in the lowers but not much in the uppers but I felt the biggest difference in my uppers but I think this was because the bushing were collapsed on the uppers.
  5. T

    porting and polishing heads

    it isn't that bad porting and polishing heads. I am in the process of trying to develop a new type of non PI head. I am trying to change the ports and stuff around to see if I can get some good gains out of it. I would like to invent a new type of head for the 4.6 since that department is...
  6. T

    4.6 vs 5.0

    The other think about the 2v to the 5.0. You can put heads cams and an intake on a 5.0 right. Tell me how many different aftermarket heads for a 5.0 and a how many for a 4.6. The only one for the 4.6 are the frpp and who is going to spend that kinda money. I would name the ones for a 5.0 but we...
  7. T

    Florida 5.0 replacement Gauge Cluster

    That looks really good. I was fixin to ask you the price but I see it now. That is a lot of cheese for a set of gauges. I think I might just buy a 96-98 cobra unit and pocket 150 bucks.
  8. T

    4.6 vs 5.0

    I can back up my claims. Stock for stock the 99's will out run the 93's. If you do all the same modding but with out stroking either motor the 4.6 will still come out on the end. I have seen a 99 gt with a blower, cams, tune and the other bolt ons go in to the 550 hp range without going into the...
  9. T

    Is an aluminum radiator worth the $$??

    He was probably was aware of that being that all radiators today are made of aluminum. They will cool better but if you stock one isn't busted or leaking then I wouldn't spend all that money for for one because they are only going to cool just a little bit better unless you have a race car.
  10. T

    1997 gt 4.6l mods.

    it depends if you want to make it a bolt on car. Like earlier stated the PIcams and intake is a really good dollar for hp buy. The bolt on stuff cost about the same as 5.0 stuff. It just depends on where you are wanting to take you car. The cobra's are extremely heavy and don't make a lot of power.
  11. T

    32V 5.4 L

    a built 32v 5.4 would be bad ass and if it had a blower it should make a lot of hp. If you put that motor in an old fox body lx trunk style it would scream.
  12. T

    Gears and Aluminum Driveshaft Installation...

    they should charge between 175 and 250. The gears aren't as bad as everyone makes them out to be but the are very time comsuming. To swap the U joints shouldn't take no time at all.
  13. T

    Ordered Tri-Ax do i need new bushings or gasket??

    just go and buy some permatex black silicone or get the red high temp both work just as good.
  14. T

    4.6L engine swap, 1st timer

    non experinced it should take about a day and a half and that is constant working and no 2 hour smoke breaks. The started bolt is a PITA and the top trans bolt are kinda hard to get to but that is about it. Remeber where all of you computer wiring goes.
  15. T

    location of purge valve canistor?

    yeah that is where the charcoal canister is and if you are looking for the evap purge valve then it is on the passenger side up under the hood behind the strut tower. it is about 3" long and about 2" wide and has a black padding around it. the purge canister is about 6" long and about 4" round...
  16. T

    let's see pic's of your 96 gt's

    here is mine before I got the windows tinted.
  17. T

    '01 GT: Valvetrain Whine?

    the chain tensioners are self adj. and everything lese is self adj. i have no idea what is whining unless the top of your motor isn't recieving oil. What weight and kinda oil are you running in your car.
  18. T

    Weight Transfer- Struts or Springs

    Putting it on 1 will help but it isn't going to transfer all that great. Buy you a set of slicks or drag radials is about the only way that you will get it to hook up.
  19. T

    COLD AIR KIT=HOTAIR KIT

    I have the densecharger and it never gets hot.
  20. T

    Daily Driver UCA/LCA

    I have the steeda's and they are both exceptionally good. The ride will not change except the side to side movement is virtually gone. I would recommend the steeda's. I have solid lowers and adj. uppers. Your traction will get better or well mine did and you will be able to eliminate the quad...
Top Bottom
Back
Forums
Menu