Search results

  1. S

    Cam Question

    Won't be driving it past September. Also i was told for the fuel that i could just get a regulator and adjust the psi down to what it needs to be. Have a brand new MSD dizzy in a box that im just going to take back an exchange for one so i can use carb.
  2. S

    Cam Question

    Main reason, its going to save me about 1000. I need a new intake anyway. New MAF, New injectors, and so on. So using a EFI cam i should be fine in a carb set up.
  3. S

    Cam Question

    Wallet already hates me.
  4. S

    Cam Question

    Since i am going to a Carb set up, what about the cam. I see on CompCam website they have Carb Roller cams and EFI. What is the difference. Is their select few cams i can use. What would happen if i put a EFI cam in a carb set up. I don't want to do custom right now. But i was a cam with a...
  5. S

    Intake Question

    I am swapping over to carb and i don't know to much about Carb intakes. Which one of these is a better intake and why Edelbrock 71211 - Edelbrock Performer RPM Intake Manifolds - Overview - SummitRacing.com Edelbrock 7521 - Edelbrock Performer RPM Air-Gap Intake Manifolds - Overview -...
  6. S

    Eliminator Switch Chip

    I bought this JMS Chip & Performance Center about 6 months ago. Put it in the car drove 10 miles, has been sitting since. Going carb, don't need it anymore. 100 or best offer.
  7. S

    MAF and Injectors

    Will take 200 for the maf and injectors together new stuff added New Professional Products Throttle body 70mm, less then 50 miles. $90 professional products Elbow adapter for throttle body - $40 Cold air intake with k&n air filter - $40 Stock fuel rail off my 94 GT make offer
  8. S

    MAF and Injectors

    250 for both
  9. S

    I want to make my block roller

    Well the bad news is i won't get to drive my car until spring. Even worse news is i need a new block. The problem that caused everything i was told, was that the springs i had were to much for the flat tappet lifters and cam, so basically it beat the **** out of my lifters and cam, and...
  10. S

    FACTORY 5.0L BLOCK, HEADS, & INTAKE**CHEAP**

    Would like to see pictures of the block.
  11. S

    MAF and Injectors

    I have a Granatelli Mass airflow, I bought it not to long ago from a guy who bought it and it was still in the box with the wrappings. Its tune for 24lbs injectors and cold air. Granatelli Motor Sports 75955024-01C - Granatelli Motor Sports Mass Airflow Sensors - Overview - SummitRacing.com...
  12. S

    Cylinder Head Question

    thanks a bunch
  13. S

    Cylinder Head Question

    I tried looking up the number for the heads i have but i can't really find what i am looking for. f3zm 6049 y302 heads I can't find the CC chamber for them. I found this Machined for 1.94" intake and 1.54" exhaust valve diameters, they are at the Shop going to get ported. I don't know...
  14. S

    intake manifold questions

    I am really leaning towards a custom, but what are some good cam choices out of the box.
  15. S

    intake manifold questions

    I don't know really any good places for a custom cam so thats why i am going back an forth on the issues.
  16. S

    intake manifold questions

    Right now i have fully ported GT-40 aluminum heads. Well they are at the shop now, and before anyone asks why i put money into them, well the work was done for free. I do have a F-303 cam but its still in the box and i have been thinking of taking it back and just get a custom cam. Oh an its...
  17. S

    intake manifold questions

    I sold my Typhoon last night and bought a RPM II, just making sure it was a good trade up.
  18. S

    intake manifold questions

    when your talking about the Performer are you talking about that or the Edelbrock Performer RPM II Intake Manifolds
  19. S

    Cam

    and make sure you have the correct springs. If you don't want springs that are set up for a roller cam, if you do that it will look like someone chewed on your cam and lifters and end up with Shavings throughout your engine.
  20. S

    Supercharger fitment question

    I bought one for a 92 used and it was going to cost me about 1,000 to get the stuff threw vortech. Maybe they were lying to me. Also that one may be different. I just remember the problems i had when i didn't get the right year one. I ended up trading it for h/c/i set up.
Top Bottom
Back
Forums
Menu