Search results

  1. S

    Trick Flow

    To get the 350 or 360hp out of that kit i believe you have to have your block bored. On the trick flow website it says it was tested on a 306 i think. edit- I looked it up but i can't seem to find where it says that. I swore i read that about the kit. oh well looks like i am wrong. Still a good...
  2. S

    I want to make my block roller

    How do i match stuff. What kind of stuff do i look for. What should i not do, things like that. Also i see things about the x303 cam might require notches in the piston. Would the notch have to be in the bottom or something. I don't understand those kinds of things. Mine is a stroker...
  3. S

    I want to make my block roller

    Figured a ford cam would be a great match for some gt-40 heads. Right now the intake is ported to match the heads. The heads have ford racing double springs.
  4. S

    I want to make my block roller

    Yes they are. Plus the guy at Ford Racing said all 302 blocks from mid 80's had the threaded holes. I asked him about the 87 f150 and he said yes then went on to say what years, but i kinda zoned out because i was thinking about cam and lifters. What is the difference between a computer...
  5. S

    I want to make my block roller

    He took the intake off just to make sure and it has the holes for the spyder thing. The block is a roller set up. I was just the moron who put the wrong **** in it. One of the issues i am having is the cam is hopping around, and the hole lift,push rod, rockers just don't sit right. We measured...
  6. S

    I want to make my block roller

    My dad just started the work on the car. I had it at a Performance Shop, for a few weeks, charged me 300 and they couldn't tell me anything that was wrong with it. Now my dad has it and told me what i needed for the roller stuff, but ive been told so many different things from people here...
  7. S

    I want to make my block roller

    Why can't i just go by roller lifters, roller cam and so on. What is the difference between a non roller 302 and a roller 302. Where 87-90 F150 302's roller, or roller capable without doing anything besides throwing the parts in there. I am lost, my car runs like crap, i am about...
  8. S

    I want to make my block roller

    Its a 331 stroker, with keith black flat top pistons. gt-40 alum heads, bbk shorty headers, 24lbs injectors, typhoon intake, 70mm throttle body, the cam i have is a Comp Magnum cam duration 296 with magnum lifters, all flat tappet What i did wrong was made it flat tappet instead of roller...
  9. S

    I want to make my block roller

    No roller cam, no roller lifters. But i want a roller cam and lifters.
  10. S

    I want to make my block roller

    Its a 331 stroker. I fooked up building it. My first build, i made some mistakes. So since its a 302, i can run any cam i want with the spyder thing and any roller lifters i want. I would so love not to spend 500 just on lifters, that would be super cool. My wife is going to kill me if i...
  11. S

    I want to make my block roller

    So all i need if it is already tapped is that retro fit sypder thing, and some roller lifers. Someone said if i do that then i need a reduced base cam is that true.
  12. S

    I want to make my block roller

    I want to change my set up to roller. I have a block out of a 89 F-150. What do i need. I know i need some kit, or certain kind of lifters, or something along those lines. Please help, my car runs like crap and i am hoping changing this over will help. Even if it doesn't help i...
  13. S

    Quest for 400hp

    My new goal is 400hp Right now i have GT 40 aluminum heads ported Typhoon intake ported 331 stroker kit with keith black flat top pistons cold air intake Comp Cam with 282 duration 24lbs injectors 70mm throttle body 70 or 75mm mass air bbk equal length headers I imagine i will need some...
  14. S

    Twisted wedge and Windsor Jr heads

    interested in the Trick Flow heads do you still have them
  15. S

    Torque Question

    Thanks a bunch. I just wasn't sure, i don't want to strip anything.
  16. S

    Torque Question

    I was wondering what the Typhoon intake with GT-40 aluminum heads should be torqued too.
  17. S

    I hear these 5.0s run hot...

    Something imo is wrong because when mine was stock it never ran past the R, most of the time it was on the 0, and now with the stroker it still doesn't run that hot.
  18. S

    What Size Push Rods

    the reason it was my cam was because it changed my firing order an caused the computer to still use the stock order. The entire block is flat tappet an not roller, i was going to convert it back to get a roller cam with the right timing order. But i just found this cam Comp Cams...
  19. S

    What Size Push Rods

    Figured out the problem i was having was my cam. Put a flat tappet cam in now i have to convert it over to roller. if i use this cam COMP Cams CL35-328-8 - COMP Cams Xtreme Energy Cam and Lifter Kits - Overview - SummitRacing.com and some 1.7 rockers What size push rods will i need.
  20. S

    What the hell is causing this to happen?

    Do you have stock headlights. If not i have seen this on some aftermarket lights specially ones like the Halo lights, in my friends case it was just some of the wires he ran/spliced were getting a bad connection causing the light to flicker.
Top Bottom
Back
Forums
Menu