Search results

  1. N

    i need a good clutch ...

    just broke center force dual friction..whats next ..? running 10.09s ..
  2. N

    99 cobra s/c help..

    i also want a complete kit ..and one that easy to install..k/b.?
  3. N

    99 cobra s/c help..

    i want power all though the rpm range.no lag
  4. N

    99 cobra s/c help..

    i want to add a s/c ok , notfast enough .i want around 425/450rwhp ok! right now i got 291hp .should i get the k-bell 5 psi kit or ,the 10 psi procharger with intercooler.?confused. :shrug: thanks
  5. N

    393 W stroker people look !

    well if i still got to notch block might as well go 408 them..i called pro power ,,the 418 kits are only aval. in flat tops...i haven't checked to see if anyone else might have them in dished piston..i want lots of torque.. 9.1 to 9.5 c-r.
  6. N

    Cleaing weld draglites?

    i had to do mine 3 times to look good again..
  7. N

    393 W stroker people look !

    iam planing on building a 398 its going to be .060 over ,going in a pick up.rods are 6.200 C/H is 1.355 .do i have to notch the block ,like you do a 408. this is my towing truck. plan on running dish pistons to get compression down.right now i'am running 10.7 to 1 with rpm heads ,want to run reg...
  8. N

    393 W motor

    ^^^
  9. N

    393 W motor

    iam planing on building a 398 its going to be .060 over ,going in a pick up.rods are 6.200 C/H is 1.355 .do i have to notch the block ,like you do a 408. this is my towing truck. plan on running dish pistons to get compression down.right now i'am running 10.7 to 1 with rpm heads ,want to run...
  10. N

    manual brakes...not happy

    thanks rick!you ran into the same probelm i did the the switch not hooking up ,hitting steering wheel brk. i'am going with the power booster again..kind of idles up higher now too , with the locked out dist.very snappy now. cause with the manual brakes i would have to run the 1/8 mile ,,and a...
  11. N

    manual brakes...not happy

    my carb as no vac big or small...i just added 1 inch spacer plate drilled it for power brake hose..its getting sort of close to my hood now ,,i couldnt run air cleaner before... also my cam is 262/274 at .050 .112. will i can work with that setup.? thats what i'am doing now :shrug:
  12. N

    manual brakes...not happy

    dam i just wasted 80 bucks on asp... :fuss:
  13. N

    manual brakes...not happy

    what do i click on to see the master cylinder?? like you said you got to stand on it ...and it slows down very slowly...
  14. N

    manual brakes...not happy

    i will be glad to sell you my brand new covn. kit..plate and rod...
  15. N

    manual brakes...not happy

    ^^^
  16. N

    Crank just broke in my DSS 331 Pro Bullet!!!!

    they will tell you that you put it together wrong,,i bet you. cover their ass..but hi perf motors have no warr.
  17. N

    manual brakes...not happy

    yes got demon 1000 cfm no vac ports of any kind on it..either does intake.i got a 1 inch spacer with fitting on it ,,but don't hace the extra room under hood , even with 4in. cowl hood.i can't even run an air cleaner. super victor intake is tall.i got 1/2 inch nitrous plate also on it. :shrug:
  18. N

    manual brakes...not happy

    bump
  19. N

    manual brakes...not happy

    thanks will check out.. also i got it from asp came with plate and new rod ,they said that i could use same master cylinder.??,i noticed that the rod is bent that they sent. the power brakes booster one was straight but cant remove from booster. i notived also that my connecter to my brake light...
  20. N

    manual brakes...not happy

    i got a 83 gt with 408 motor,i just got a power brake delete kit. got it installed bled,problem is i seem to have to stand on the pedal ,and it does not want to stop quick.i'am using same master cylinder,and pro.vavle..what is the deal..i want to go run car ,but afraid it wont stop me in...
View older results
Top Bottom
Back
Forums
Menu