Search results

  1. GONDO79

    Electrical issue..flashing headlight

    thanks :nice:
  2. GONDO79

    Electrical issue..flashing headlight

    Any good suggestions or suspicions why my headlight flash? I checked for a bad ground last night up front and rear and nothing. I cleaned up the ground conection points just in case and wire wheeled the screws. The lights almost flash as if it were attached to a flasher(like an emergency or...
  3. GONDO79

    Rear leaf spring eye bolt cannot be cut

    I just finished swapping out my v6 leaf spring to v8 and changed out the bushings with energy suspension. I used an air hammer to push the bolt out along with some penetrating spray, I fought with it for 2days and almost gave it.You just gotta let that penetrant sit then "blooop!" that **** will...
  4. GONDO79

    MUSTANG CRUISE SPOTS OR SHOWS

    Where are all the muscle car/classic cruise spots or shows at? I live in INGLEWOOD, CA and I wanted to cruise wit a few other stangs or classics. I know about the one at tha home depot on tuesdays on century. :SNSign: I need to break in the cam and other parts before I :Track: :D...
  5. GONDO79

    I need my rear fenders rolled.Does anyone have a fender roller?

    Im located in Inglewood,ca. Please let me know if Anyone knows a shop or if you have the actually professional roller.
  6. GONDO79

    Leaf spring question..

    Is the tension of the leaf springs from a 1964 V6 greater or equal to some 1966 gt spings? My situation is that the car was orginally a v6 and was convertered to a v8. When the rear end was swapped out I used the v6 leaf springs. Now I've put on some 17x8 torque thrust and Im rubbing when I...
  7. Imported Item

    Imported Item

    photo
    • GONDO79
    • Media item
    • Comments: 0
    • Album: THA STANG
  8. Imported Item

    Imported Item

    photo2
    • GONDO79
    • Media item
    • Comments: 0
    • Album: THA STANG
  9. GONDO79

    Any suggestions on a roller motor build?

    I just got my hands on a 87 mustang roller motor. Ive been read up how u can get a up to 400HP. I plan to use it 40%street 60%strip. i still want to be able to cruise it on cruise night. I also plain to use a carb not fuel injection. Any feedback on making it a 331 vs 347?
  10. GONDO79

    ANY SUGESTIONS ON A ROLLER MOTOR BUILD?

    I just got my hands on a 87 mustang roller motor. Ive been read up how u can get a up to 400HP. I plan to use it 40%street 60%strip. i still want to be able to cruise it on cruise night. I also plain to use a carb not fuel injection. Any feedback on making it a 331 vs 347?
  11. GONDO79

    Ignition Switch

    Switch Sorry I forgot to mention that it's on my 64...It won't even turn...im worried about break the key!:eek: I pulled the harness off and I tried to push the switch to pull the retainer but as you mentioned you have to be able to turn the key to pull the retainer. Will it mess it up if I...
  12. GONDO79

    Ignition Switch

    So I'm having issues with my tranny...and when I finally give up and try to start it the Damm Ignition Switch takes a dive! DAMM IT! It's brand new....It worked fine until now...the key won't come out and I can figure out how to take it out. Any Ideas?:nonono:
  13. GONDO79

    TRANSMISSION HELP!!

    Converter Thanks for all the help and info.... I wanted to find out if anyone knew how many quarts it should take to fill the tranny? The converter is a 11 inch 2200 -2800 stall, the C4 has an aluminum oil pan with an additional 2 quart capacity. I also have an oil cooler.
  14. GONDO79

    TRANSMISSION HELP!!

    I also running stock gears. would that make a difference? I have a detroit limited slip posi w- 3:55 i plan to have installed in about 2 weeks..
  15. GONDO79

    TRANSMISSION HELP!!

    Yea at first thats what i thought. I made sure the fluid was topped off and let it run a few minutes before Irechecked again. I took about 10 bottles filled it. I used KENDALL trans oil. Its gonna be my street/strip car. Mainly weekend a cruiser and occasional Irwindale strip runs untill I get...
  16. GONDO79

    TRANSMISSION HELP!!

    FINALLY AFTER 2 MONTHS OF NOT WORKING ON MY CAR,I ADJUSTED THE SHIFTER AND BLED THE BRAKES ON MY STANG. JUST WHEN I WAS ABOUT TO MAKE A TRIP TO THE MUFFLER SHOP I REMEMBERED THE CONVERTER IS A 11" 2500 STALL. I HAVE A 302 WITH AN AUTOMATIC C4 WITH A SHIFT KIT.I ALSO HAVE A B&M ALUMINUM DEEP PAN...
  17. GONDO79

    Some pics of interior items +

    PERFECTION...! Wow just looks great!
  18. GONDO79

    ANY SUGGESTION ON RIDE HEIGHT FOR '64

    what would be the difference between the aftermarket performance leaf springs and these cal trac ones?
  19. GONDO79

    ANY SUGGESTION ON RIDE HEIGHT FOR '64

    Xplane, how's the ride/performance with those cal-trac? That was one of the options I was reccomended to use.
  20. GONDO79

    ANY SUGGESTION ON RIDE HEIGHT FOR '64

    Thanks everyone for responding~! Blown 65, ur ride is kind of something I had in mind but im still torn.
Top Bottom
Back
Forums
Menu