Search results

  1. Roxstang

    heavy / stiff Clutch

    I have a Spec stage III, real heavy... but on slip. I mean none!! Heard good things about Centerforce, SPEC, and King Cobra. I have heard some bad things about them too. I think as long as you have a name brand clutch properly installed you should not have a problem. Remember, a light clutch to...
  2. Roxstang

    i need a new intake.

    Just curious, but how do you know it's running rich? An open air intake should lean a motor out.
  3. Roxstang

    NJ Performance Shops

    If you can do these mods yourself, you can do the headers too.
  4. Roxstang

    is a catted X or a catted H better?

    :stupid:
  5. Roxstang

    catback

    I have a Full Mac exhaust, Long tubes, Pro Chamber, mufflers and tips. I have catted X's for emissions. Sounds great! Good price too. I have had them on for 2.5 years, and no probs!!
  6. Roxstang

    I'm sick of my TR-3650.

    You can go to their web site and find a dealer near you. Also, Red Line trans fluid works great too. I have have good success running both. Both help "quite" the trans, but I'm not too concerned about gear whine/shift noise...
  7. Roxstang

    T-Handles Comfortable?

    Well she does have two hands!!! :lol:
  8. Roxstang

    T-Handles Comfortable?

    I use to run a T-handle on my Tri-Ax. I liked it, My wife however hated it so it was back to the ball, she likes holding my balls :rlaugh:
  9. Roxstang

    Fuel Pressure

    :stupid: I notice the same thing, I asked the same question and got the same answer. You ought to see the pressure when I hit the nitrous with a 255lph walbro in the tank....Woooooo It's all over the place, anywhere from 70psi WOT to 35 between shifts.
  10. Roxstang

    Do i have PI Intake and heads???

    :stupid: I would "assume" you don not have them. If the car is stock anyway.
  11. Roxstang

    Best Line Lock

    I use a Moroso, spent $75 and about 10 bucks in break line and fittings.
  12. Roxstang

    Motive Or Frpp 4.10's

    I have had FRPP 3.73, 4.10 and 4.30 in my stang. All performed great!! I had Motive gear in my truck (4.56, I had 37x12.5x15 BFG's) and they worked just fine. They were a little harder to set up (parts chasing, more measuring) and I didn't notice any "whine" due to tire noise!!! As long as the...
  13. Roxstang

    Rear End Shifted Over?

    I kept crushing bushings and bending bars too. I put a set of Mega Bite Jr's on upper and lower and HPM's bushings. Works great and no more bent control arms.... :nice:
  14. Roxstang

    Mustang is up on jackstands...

    No problem... they unbolt. on my 02' GT they did.
  15. Roxstang

    Rear End Shifted Over?

    The axle could be "pushed over". Take some measurements to be sure it's the axle first. I'd hang a plumb bob off of each axle without the wheels on of course, and off each frame rail (same spot on each side) and check for square...
  16. Roxstang

    2001 GT Clutch

    Yeah but is a "cheap fix" and you'll love the head rush you get when you install the quadrant!!!
  17. Roxstang

    Motive Or Frpp 4.10's

    :stupid:
  18. Roxstang

    Are Bullit rims unidirectional?

    so what your saying is that they "are" unidirectional.... :lol:
  19. Roxstang

    Has Anyone Been Pulled Over Or Ticketed For Running An Offroad X Pipe

    :stupid:
  20. Roxstang

    where do i find svt focus pump

    I have a Walbro 255 for 2.5 yrs 20,000 miles... no problems guess I'm lucky.
Top Bottom
Back
Forums
Menu