Search results

  1. C

    I need a quite EFI fuel pump

    Same here. Just replaced my old pump with a new GSS340 255HP Walbro, and it's also very very quiet. I've read many post's about 255's being loud, makes me wonder if it's the brand or the way it's installed.. who knows for sure.. Scott
  2. C

    I need a quite EFI fuel pump

    What year Mustang? what type of pump are you using now and where did you locate it? I ran 2 external fuel pumps (holley blue in the rear, & red up front) on my older mustangs, and used a thick piece of rubber between the frame and the pump bracket mounts which made them hardly noticeable at all...
  3. C

    100 watt foglight bulb. Anyone using them?

    I use the H3 100 watt bulbs in my fog's and it made a huge diff in side lighting (talk about pissin off the cars in front of me in the next lane :rlaugh: ), but it sure lights up side street signs etc etc. I did though re-wire them so their on their own circuit so I can turn them on without...
  4. C

    H-pipe with cats....

    The best flowing HF CAT's are made by Car Sound/Magnaflow. I threw on a pair of Shorties (damn Calif smog) goin to 2 1/2" Car Sound HF CAT's to 2 1/2" Dynomax ST's (which out flow Flow Master 40 series) with 6" slightly angled turn downs. NO Drone & Perfect fit. My BP is a nice 1.3". Car...
  5. C

    mods and speed density

    Michael, Don't your fingers ever get tired from your very nicely detailed LONG explanations? LOL J/K Yes, the Cam is the key with SD. it's all about the timing events of the Cam, choose those correctly and an SD car will run like a raped ape. Scott
  6. C

    331 or 347 with speed density?

    Michael Yount is correct. BUT it can be done. I know because I ran a 347 with SD, but had a Custom Cam made for it. The only Bit*h was, Calif smog (ARGGG), otherwise it ran terrific. Scott
  7. C

    Electric fan / aluminum radiator question?

    Dual Ramchargers Setup
  8. C

    Electric fan / aluminum radiator question?

    Did you get the one with the complete plug in wiring harness?, If so, the harness you'll get is much better than the one they show on their site. They upgraded it in a few area's. Very simple install. took me 1 hr tops. :nice: Scott
  9. C

    Electric fan / aluminum radiator question?

    Just some info on the BM fan. it may have a high CFM rating, but it doesn't cover enough of the fins which is what you want. I run the new dual 12" Ram Chargers setup which has a slightly less CFM rating than the BM, but it covers nearly 95% of the fins and cools far better than the BM, plus...
  10. C

    Breaking in new motor?

    That is for regular hydraulic cams. Hydraulic roller cams DO NOT need to run at 2300 rpm's for 30 minutes. Just run it for 5-10 minutes, set timing, FP, etc then go for a quick drive for about 10 mins, then change oil & filter. Scott
  11. C

    King Cobra Clutch?

    My SD KC w/ceramic disc has held up great. I use the same setup Dave (Forced347) used before he sold it. only thing is you can't buy this setup just anywhere. Scott
  12. C

    People with a Steeda Tri - Ax come in.

    Oh. I wasn't aware of that. I saw it on a diff site and decided to save it. Haven't been to steeda's site in some time.. Thanks for the heads up :nice: Scott
  13. C

    People with a Steeda Tri - Ax come in.

    Someone created this, I found it quite useful for those contemplating which one to get and their actual throw Scott
  14. C

    500-600 fwhp guys come in !

    I've contemplated the T56, but heard alot of good things about the G Force. I do agree though, the 6th gear would be nice and as posted, the rpm drop from 4th to 5th would be much better with that 6th gear. I will say my T5 has shifted very well with no issues, but then I don't beat on it as...
  15. C

    500-600 fwhp guys come in !

    Roughly 550RWHP and still using my T5z :rlaugh: The only reason it's held up is because the tires bust loose so easy. Lord forbid the tires ever grabbed hard (BOOM goes the tranny), Then the G Force T5 goes in :nice: Scott
  16. C

    what is the biggest tire size I can go on 17X8 rims for the back of GT & LX?

    I've got 255/40/17's on the back on a 9" rim (5.95" offset) and have plenty of room for a wider tire..next size will be a 275. car is not lowered tho
  17. C

    5.0 mag: BBK longtubes make LESS power than shorties

    I had LT's but had to take them off for the smog nazzi's. After putting my shorties back on and having the system tuned for best flow and velocity, I think i'm just going to stay with them. My BP is extremely low with the shorties & it's plenty loud. I can't justify the hassle involved, the...
  18. C

    347 stroker

    I don't think DSS use's Probe Pistons, but you might ask them if they can switch to them. When my SB was built back in October 03, These pistons were on back order. I had to wait 3 extra weeks for them. Seems FPS sells alot of these for their 331/347's. Probe reccomends a slight tighter...
  19. C

    347 stroker

    These are the Probe SRS Pistons I use in my 347 with the 5.4 rod and as you see, they have no ring intersect issue. Probe SRS Pistons It's all about how well the motor is built and parts used. Scott
  20. C

    Best year 5.0 motor to get?

    BTW, 86-early 92 all had forged pistons, not just 89+. Just some FYI
Top Bottom
Back
Forums
Menu