Search results

  1. G

    What Cam do I go with

    If you do not want to change out springs stay with stage one cams like comp XE262.
  2. G

    Need Mustang Styling advice.......

    i can't get any of your pictures to work. I have a 98 gt convertible and I think it would look better without the spoiler.
  3. G

    Porting PI intake? :)

    The ports on the intake don't gasket match any more than do the ports on the heads. Granted the heads are aluminum with meat around the ports.
  4. G

    Porting PI intake? :)

    You can grind away plastic just as well as you can grind any metal. If you grind through plastic you got the equivalency of welding to repair it. Stuff like epoxy and jb weld is also fluid and sets so it is easy to shape. I am kind of playing devil's advocate because I have never heard of...
  5. G

    Porting PI intake? :)

    That is what I have. The question is can the plastic intake be modified to gasket match better. The rabbit is still running :) next shooter.
  6. G

    Porting PI intake? :)

    I am bored so I just thought I would throw out a wild hare idea and see who shoots it first. Couldn't you use a dremel to grind away that soft soft plastic and then use epoxy or jb weld or something to gasket match? Would the fuel eat it up? Would heat do it in? Would it destroy the...
  7. G

    Steeda x2 ball joint

    I put the spacer on top of the isolator cup instead of inside . so far no problem.
  8. G

    typhoon intake

    There is a thread on modularpowerhouse.com where they installed one and had to weld it because it had a crack and leak. No word on if it made power but not really a QC indorsement is it?
  9. G

    Lowered FRONT only

    I got vogtland springs and the front is maybe a 1/4 inch lower than the back. I like the stance A LOT. Maybe it is just the 94-98 body style but it really seems right.
  10. G

    Floor switch(es) for operating windows

    I would be happy if I had a foot switch to dim and bright the lights. I hate the way the handle pushes forward and back instead of just clicking.
  11. G

    Will help you in the Atlanta area

    If anybody is doing a pi head/intake swap or installing cams I will help just to watch and learn. I live in Alpharetta.
  12. G

    L/T headers on an auto?

    Supposedly the macs and hookers will fit. With the mac you have to loosen the passenger header if you need to work on the transmission. You do not have to take the hookers off but people bitch about it rubbing the steering shaft. I have seen people say BBK will work if you cut the passenger...
  13. G

    Good Quality Real Aluminum Dash Kit

    I bought one off ebay from fire and ice chics. Pretty cheap and good quality. I also got bumper lettering too.
  14. G

    Can I change shocks/struts,springs myself?

    I just did shocks/struts, springs, uca,lca,cc plates,tie rod ends, x2 balljoints a couple of months ago on my 97 gt. I too was apprehensive but it werent rocket science, just a lot of time and grunting. I live down south so I dont know about salt but I used pb blaster on all the bolts and did...
  15. G

    Sniper software/programmer

    I believe sniper is a rebranding of EFI. MPH used to use EFI but had a falling out because of poor support and uses SCT now.
  16. G

    About aftermarket crossover pipes..

    I have been told that H pipes are also better in low end torque and for automatics.
  17. G

    HP TT OR Proturbo Single T-76?

    Every thread I have read says the single turbos run out of steam at about 5500 rpm and stop making power. There is a big discussion on modulardepot on this. modularmustangs.net (modular performance) has installed several HP turbos and everyone seems to be real happy with the kit. If it was me I...
  18. G

    Front Control Arms

    I will let you know, I am going to replace the stock lca and swaybar bushings with urethane and x2 balljoint. I will be using vogtland springs and tokico dspec struts.
  19. G

    6x8's which ones

    Some posts say aftermarket speakers do not sound good with the mach460 amps. The amps are tweaked to compensate for the quality of the speakers. I have the same pioneer headunit and I think it sounds good with the stock setup. Please report back how it worked out when you change speakers.
  20. G

    Anyone else remove there seat belt guides?

    raise your headrest about half wayslide a hack saw blade down the front of the metal bar until it stops. Holding the blade firm and push down a little so the blade is between the clip and the groove. push the hack saw blade further down and lift the headrest out.
Top Bottom
Back
Forums
Menu