Search results

  1. DemonGT

    Unneeded wires

    Also, any one know what the copper colored thing is on the firewall?
  2. DemonGT

    Unneeded wires

    I was removing my charcoal canister today and starting looking around at some of the stuff on the passenger side fender wondering what is what and if i can remove any of it? I know behind the tower there is a vacuum cluster that is unhooked and hanging but i do not know what any of the other...
  3. DemonGT

    California special color choices?

    I found one slightly used in race red and it looks really good. Still undecided if i want the PP1 package.
  4. DemonGT

    California special color choices?

    Anyone know why they limit the color options on the CS? Really wanted a twister orange car with the CS but that color is not available?
  5. DemonGT

    Mercury Mariner plugs/coils?

    So i tried Tasca again but this time i searched for a 2010 Escape with the 3.0. I figure it should be the same motor between the Escape and Mariner? A intake gasket shows up for the Escape but not the Mariner...
  6. DemonGT

    Mercury Mariner plugs/coils?

    Ok, ill pass on the coils watched a video and it looks pretty straight forward for removing the upper intake. I cant seem to find a part number for the upper to lower intake gasket though? Iv looked through the diagrams on tasca and it does not seem to list it? Are there any other gaskets id...
  7. DemonGT

    Mercury Mariner plugs/coils?

    Need to do the plugs on the wifes Mariner and thought as long as im at it to replace the coils. I thought they were like $80 each but found this set on ebay for all 6 coils and plugs for $77. Am i missing something here or is this legit?
  8. DemonGT

    Factory subwoofer?

    No i did not.
  9. DemonGT

    Spartan Wide Band install

    What are the blue and brown wires? So green was signal red power and black and white twisted together is ground
  10. DemonGT

    Door belt molding

    Bought new door belt moldings from LMR and have heard nothing but positive things. I was able to get them put on but the issue im having is there all the way up touching the side mirror as they should be but the hole in the door does not line up with the hole in the molding for the screw?
  11. DemonGT

    Spartan Wide Band install

    My spartan came with my Pimpxs and it was the sensor,controller and a bag with i a fuse that can be installed...somewhere..i dont recall seeing a LED?
  12. DemonGT

    Steve's Megasquirt/tunerstudio Help Thread

    The pigtail i posted is the one im going to use, i have not purchased a transducer yet as i keep reading mixed things when comparing the cheaper ebay ones to ones that cost more.
  13. DemonGT

    Spartan Wide Band install

    That would be great! I think it would clear up alot of questions people have. I have a hard time reading stuff and comprehending it. But reading a write up and having visual aids goes a long way. I figured with how many people have bought and used the spartan WB there would have been a youtube...
  14. DemonGT

    Spartan Wide Band install

    Thank you, thats what i was looking for. So the black and the white wires from the Spartan will be tied together to the stock wire ground on the stock O2 harness. Off subject but can the Pimpxs read/use any of the info from the stock VSS? I noticed when doing my jumpers on the pimpxs board...
  15. DemonGT

    Spartan Wide Band install

    Looking at the wiring for my Spartan WB, the signal and 12v wires are pretty straight forward when hooking to a stock O2 harness but im a bit confused with the black and white wires. It says to just hook them together but the black goes to pin 46 and it says above in the instructions to never...
  16. DemonGT

    Steve's Megasquirt/tunerstudio Help Thread

    I actually have one of those EGR delete plugs in mine also. Do you remember which wires colors connect from the pigtail to the stock wiring? Looking at your diagram it looks like wires 27,46,26. Would 27 be the signal, 46 ground and 26 5v?
  17. DemonGT

    Steve's Megasquirt/tunerstudio Help Thread

    After installing the transducer do you just use a wiring pigtail and wire it into the factory EGR wiring? I didnt understand what you were talking about when wiring the transducer to the EGR? I was going to buy something like this with my transducer for wiring it in...
  18. DemonGT

    Steve's Megasquirt/tunerstudio Help Thread

    Thanks so much! I also am not using the EGR so that works out great. Iv started doing my jumpers inside the case for the Pimp and was wondering if i put on the jumper for MAF and end up not using it is that a issue?
  19. DemonGT

    Factory subwoofer?

    In the 18-20 mustangs, if you buy one with out the sub in the trunk does anyone know if the wires are still there to hook one up so you could buy/install one later if wanted?
  20. DemonGT

    Steve's Megasquirt/tunerstudio Help Thread

    Lots of good info here, i appreciate it. As for the canister iv been researching it and i came to the conclusion that if it works to leave it but with me swapping over to a Pimpxs it seems like alot more trouble then its worth. Ill just end up ditching it, just trying to figure out the best way...
Top Bottom
Back
Forums
Menu