Search results

  1. keith1991

    Help me price a 5 lug conversion

    I'd say 98% of my parts are either used or junkyard parts. My front setup (spindles/rotor/calipers) were from ebay, got my a-arms from a friend, stock new booster (from a friend), 99 MC junkyard, bought new the russell SS lines, the rear axles were from the junkyard, new rotors, calipers...
  2. keith1991

    11" brake conversion

    Yes, on pre 87 foxs the 87-93 is a bolt on upgrade. As far as more improvement, yes it'll be better than what you have on there now. I just went from stock brakes to 13" cobras. Dyamn is all I can say.
  3. keith1991

    Brake Gurus come in...swaped calipers, rotors, rear cyliders, Hard High Pegal????????

    Try checking to see if anything is binding. Check your vaccuum lines to the BB.
  4. keith1991

    FS #6600 ...engines out! (pics)

    Another easy way to remove the sound deadening stuff is use a torch and heat it up a little then use a putty knife. It's like butta...it'll take you no time to remove all of it.
  5. keith1991

    The thread of the nicest FOXES!

    I'll get more up, it's raining now..
  6. keith1991

    Electric Fan, how many CFM for my combo

    Just get a Mark VIII, Thunderbird, or Taurus fan and you'll be more than fine.
  7. keith1991

    INTAKE SWAP

    You can also get some bolts that are longer than the stock ones and cut the heads off so you pretty much have long threaded studs. This way your manifold will drop straight down keeping your gaskets in place.
  8. keith1991

    Mechanical or Electrical Gauges?

    Here, this should help clear things up a little.. clicky..
  9. keith1991

    high oil pressure ??

    My guess is because you put a high volume oil pump on, hence the high reading. Even if you moved the sending unit, it would still read high.
  10. keith1991

    2 year project DONE!!!!! PICS

    Looks really good. Try using photobucket..
  11. keith1991

    Clunking noise with fox Cobra brakes

    dude i have that on my stock brakes too but i can't tell from which side it's coming from. I hope when I upgrade to my 5-lug cobra conversion it magically goes away..
  12. keith1991

    what is this??

    Mine started to make a weird noise, kinda like feedback through speakers when you have a bad ground. Found out it was that airbag module. I removed it. Now my airbag light just stays lit instead of blinking. All I have to do now it remove the light from the dash.
  13. keith1991

    aftermarket catted H-pipes and emissions

    I thought smog stations where to help the environment not polute it more... :shrug: :rolleyes:
  14. keith1991

    just installed 1 chamber flows....

    I'd like to hear this thing too..
  15. keith1991

    Thumper/T-Moss combo done tomorrow!!

    Sounds like he doesn't want to see it break in front of him.....sketchy...
  16. keith1991

    Official Thread of Applicable Junkyard parts for Foxes

    subscribing...make this a sticky admins...
  17. keith1991

    Will 18x9's fit on a fox or stay 17x9??

    Nice coupe. Did you stay with the stock track width or go SN95 width? Suspension setup?
  18. keith1991

    Will 18x9's fit on a fox or stay 17x9??

    With SN95 rear track width or stock track width?
  19. keith1991

    EZ fix for yellowing headlights

    Just did mine yesterday. I wet sanded using 2000 grit finishing sandpaper then used Mother's Plastic Polish. No more yellow headlights! :banana:
  20. keith1991

    Help me pass smog: "Test only"

    Check your timing, change oil to name a few... I failed mine because I forgot to check my timing. It was at 14* and I failed miserably, ie. gross polluter :rlaugh: . Now it's at 10* and I need to get it redone..good luck.
Top Bottom
Back
Forums
Menu