Search results

  1. Stang8URMPRT

    Which Distrubutor??

    lol, just like I said two posts before yours!! :nice:
  2. Stang8URMPRT

    Which Distrubutor??

    BUHAHAHAHAHA 320 for an OEM 5.0 Distributor!! HAHA... A distributor from the dealer is $1,294.00 Yeah, that's right... That's not a typo. Look it up at www.fordparts.com. :rlaugh:
  3. Stang8URMPRT

    A/C problems... Jrichker/HISSIN50 please come in

    Hey, Jamie... I went outside and looked at that harness... Is the diode in the small, like 1 foot- 1 1/2 foot harness from under the coil shield to the clutch itself??? Also, how do I test it, and where the hell is it? lol
  4. Stang8URMPRT

    noise

    The squeek when driving can be caused by metallic or very cheap pads, which can squeeke a lot more then a normal organic or ceramic pad. Also, if the brakes are REAL low, there is a metal tab built into the brake bad. It's a wear indicator and will cause a high pitch squeel when the pads get...
  5. Stang8URMPRT

    thermostat help

    Sounds like the lack of vacuum is causing your problems. You can put a vaccum canister on the car (Crane Cams makes on), but they are rather large, and would be best hidden in the wheel wells. This will store extra vacuum so when you go to hit the brakes, you got vacuum for the brake booster.
  6. Stang8URMPRT

    thermostat help

    Put in a 180 degree thermo and be done. As far as the breaks... if the pedal GOES to the floor, you've got a leak, or a valve that's allowing fluid to get past and not hold pressure. Could be a bad master cylinder also. check for leaks. Also, if the pedal is just hard, and had to push, it...
  7. Stang8URMPRT

    just got my nitrous!

    Nitrous rules. :D Make sure you get it on the dyno with a wideband and make sure you a/fs are on, or liek me.. you'll melt a piston. :) I also melted a few spark plugs, always #5 cylinder.
  8. Stang8URMPRT

    Why arnet fram oil filters any good?

    Fram = ****. I put one on my 83 (before knowing 2 sh its about anything) and the oil pressure literally dropped 20 PSI. I changed it back to a Motorcraft RIGHT away. That's ALL I run. If it's good enough to come with it, it's good enough to run it all the time. :nice:
  9. Stang8URMPRT

    what plugs is everyone running??

    Holy crap... this was JUST covered not even a week ago in a 2-3 page thread... SEARCH before you post a thread! Also, Autolite 25's... Free post!
  10. Stang8URMPRT

    About to order O/R H pipe going from Catted X w. Borlas

    Hum... Pay the tickets, keep your license, drive the Stang....... Or... Forget the tickets... buy parts... get license suspended... don't drive the Stang.... :shrug: Seems like a pretty easy decision myself.......... :rolleyes:
  11. Stang8URMPRT

    Best intake kit to get???

    Been there, done that MANY TIMES. :rlaugh:
  12. Stang8URMPRT

    A/C problems... Jrichker/HISSIN50 please come in

    Also... When we first went out there, I could jiggle the wires around at the connector at the clutch, and it would turn on and off real quick. It def. sounds like a wire issue, but now it won't do it. Just some more info.
  13. Stang8URMPRT

    A/C problems... Jrichker/HISSIN50 please come in

    Gotcha. All this info is making me want to go outside and test it all now at 1:30AM. lol. It's also very discuraging lol. My fiance was in the car, and she is saying it's NOT bogging, but RISING... Like it should. So disregard the bogging down comment. It sounded like it was bogging, but...
  14. Stang8URMPRT

    A/C problems... Jrichker/HISSIN50 please come in

    Ok, so what do these diodes do????
  15. Stang8URMPRT

    A/C problems... Jrichker/HISSIN50 please come in

    Thanks JT... I noticed that relay is "clicking" when I turn the A/C OFF. Dunno if it's supposed to do that or not. Also. The car "bogs" down when I turn the a/c ON, but the clutch doesn't come on. I would see why it would bog if the clutch did kick on... It's bogging about 100-200 rpm then...
  16. Stang8URMPRT

    Car wouldn't start this morning...electrical short?

    Glad to see ya fixed it. I was gunna mention that a loose ground will do that. It'll be fine until you put a major load on it (like the starter), then all the power goes away. Good job. :nice:
  17. Stang8URMPRT

    wierd noise from exhaust hose

    Usually that sound is a loose smog pump connection. Do you still have the smog pump? There are multiple hose clamps on all the hoses runing from the smog pump to the blow down tube that goes to the mid pipe (in your case your off road h pipe. It does not need to be used, as it blows on the...
  18. Stang8URMPRT

    Best intake kit to get???

    I agree. Grn92LX can give some very misleading and bias info. His goals might be higher then most, but not all have that kind of money. 300 rwhp is a very good goal. In your signature, I see you do not have heads or a cam, so I'd stay with something like the Edelbrock Performer, or any Ford...
  19. Stang8URMPRT

    Things to do before Supercharging...

    Yep, I'm with David. Do a leak down and compression test. If you don't have that equiptment, take it to a shop and have it done. Shouldn't cost too much. Do a good tune up with atleast 1 range colder spark plugs.. .(if you have stock heads, use Autolite 24s). Pump, injectors, MAF, and a...
  20. Stang8URMPRT

    Brighter headlights without HID

    :nice:
Top Bottom
Back
Forums
Menu