Search results

  1. Stang8URMPRT

    Help!! High idle won't come down!!

    Hey, check it out... I searched for exactly how to set the idle a little higher, and I FOUND IT! Wow... Take notes newbies. Thanks everyone. :nice:
  2. Stang8URMPRT

    Resurfacing cylinder heads

    If you want to ENSURE not having to mill the intake, you can have the heads angle milled... inwhich they mill it at a very slight angle, and barely take anything off the cylinder head at the intake side. This will keep the intake sitting true, and getting your warpage out at the same time. Ask...
  3. Stang8URMPRT

    Why shouldnt I get a tubo on my 86gt

    I'd like to "tubo" my car too! :D
  4. Stang8URMPRT

    HolleHolley SysteMAX II Engine Systems for 5.0L Ford

    You'll need all the supporting hardware listed and specified by Holley.. 24 # injectors atleast, MAF, throttle body, gears atleast 3.73s.... nice headers, good exhaust... A better clutch when that one goes out. Many things on top of that engine kit to make it run and drive like a stocker...
  5. Stang8URMPRT

    Should I put on Edelbrock intake or wait??

    Yep, I would wait too. If it's just a few months, it's not worth the trouble of doing it twice.
  6. Stang8URMPRT

    EGR spacer and cobra intake question

    :stupid:
  7. Stang8URMPRT

    why get rid of EGR???

    If there was no fuel in your exhaust, there would be no reason for o2 sensors or air/fuel readings. There is always unburnt fuel in your exhaust unless you don't use fuel. lol
  8. Stang8URMPRT

    why get rid of EGR???

    To delete the EGR, 1.. you need the block plate, 2, you will need a tweecer/chip to turn off the egr function so you don't get the check engine light. The EGR recirculates unburnt fuel from the exhaust back into the motor. Although you might think this is bad, it actually keeps detonation in...
  9. Stang8URMPRT

    What kind oil do u use???

    LMAO... That will make your oil pressure drop like none other man. 5W20 is a speciality blend for new Ford Modular motors and Hondas. You should run a minimum of 5W30 in your Stang, and seeing you are also in Florida, you should be running atleast 10W40 or 20W50 in the summer time.
  10. Stang8URMPRT

    5 Speed Tight

    Yep.... it's very common. What you need to do if it doesn't want ot go into gear is put it back in neutral... let off the clutch, then press it again... it should go in fine then. Last thing you want to do is PUSH on the shifter to get it into gear. Only thing you will accomplish is bending...
  11. Stang8URMPRT

    Too much lift / duration?

    :lol:
  12. Stang8URMPRT

    Another tire question..

    lol yeah... It'd look like CRAP with those huge wheel spacers. Don't ever use wheel spacers unless you HAVE TO to clear quad shocks, or what not.
  13. Stang8URMPRT

    Mickey Thompson DR's on Pony rims

    LOL... Wonder if coconut would give me a little more? Maybe 12-15 rwhp? haha! I just thought that was funny as hell when I saw it in his list of mods. Priceless. :nice:
  14. Stang8URMPRT

    x pipe installation help

    Get some PB blaster or something simliar... soak all the bolts for about 15-20 minutes. As long as all the bolts come loose easily, it shouldn't take you longer then an hour on your back with hand tools.
  15. Stang8URMPRT

    Mickey Thompson DR's on Pony rims

    Also.... Vanilla Air Freshener as a mod... :lol: :lol: :rlaugh: :lol: :lol:
  16. Stang8URMPRT

    Mickey Thompson DR's on Pony rims

    Run stock air pressure on the street if you're not concerned about max traction. The most common misconception about tires, is that when you buy bigger, or non stock size tires that you should air them up more. Your year calls for 30 PSI in all tires. That is what I would run for maximum tire...
  17. Stang8URMPRT

    a question about the guage cluster

    89 is the first year for 140 speedos, and it was switched mid year from 85 mph to 140. I would also post, asking someone to do a carfax for you.
  18. Stang8URMPRT

    Aftermarket seat brackets.........PITA!

    I know Joe (UnderPressureGT) just installed those seats in his car, and said they were a total PITA! Looks like your best bet would be those seat brackets from Holcomb to save you the hassle... expensive though at 65 bucks a piece.
  19. Stang8URMPRT

    What kind oil do u use???

    I ran Valvoline VR1 20W50 in my 83... and I run Castrol 20W50 in my 90. Summers here are brutal on oil.
  20. Stang8URMPRT

    Don't like ride with Eibach Sportlines

    I've got Saleen Racecraft Springs. They ride good, and no where near overly hard. Only place I know you can get them still is www.cjponyparts.com . Here's a pic...
Top Bottom
Back
Forums
Menu