Search results

  1. Cobra_Dusten

    wheel & tire combo's on your fox, lets see them.

    because we arent on the corral, this is stangnet? I dont even have an account there, and have never visited there. I have no intentions to either. I know there are other wheel threads on here though. But, what the heck, i'll contribute. Here is my car. 89 white vert with silver...
  2. Cobra_Dusten

    differential yoke spline count

    its a 30 spline yoke, with a 4.3" diameter if anyone else is searching
  3. Cobra_Dusten

    help me out here..

    on the sn95's its a bracket for the ebrake cable that is in the driveshaft tunnel, do our foxes have this?
  4. Cobra_Dusten

    supercharger compression ratio

    meth is a ****ty band aid for a street driven car. keep the boost in a safe range, make sure you good fuel, get the right plugs, and keep your timing in check. Best of all, get a good tune done with it. :nice:
  5. Cobra_Dusten

    differential yoke spline count

    Ran into an issue when tearing down my rear end. Not happy with how tight my yoke is and plan to replace it. I however dont have my car near me, and need to order one. I know the OD of the yoke is 4.3" but can anyone tell me the spline count? Thanks a ton.
  6. Cobra_Dusten

    The Official Project Vanilla Ice Thread...

    not a button, its a light. it was for the line lock.
  7. Cobra_Dusten

    The Official Project Vanilla Ice Thread...

    cars under the knife again today. God bless people who can't install ring gears. I've had a light whine since i bought the car, and i attributed it to a poor install. The time came to fix it, ahead of schedule. I tore a few teeth off the ring gear today. new gears and install kit are on the...
  8. Cobra_Dusten

    what do???

    79-93 5 Lug Ford Fox Body Mustang Conversions
  9. Cobra_Dusten

    NEED ADVICE ON MY 95 GT!!!

    my sn95 had no cats, and no cel
  10. Cobra_Dusten

    NEED ADVICE ON MY 95 GT!!!

    his cars an sn95. he has the 3g. and the tbird axle is narrower?
  11. Cobra_Dusten

    NEED ADVICE ON MY 95 GT!!!

    gears are cheap to buy. but figure another 250 to install and 150 in a master install kit.
  12. Cobra_Dusten

    What nitrous set up to use

    a good wet kit and pull some timing and you'll be fine. i've never trusted the stock ecu to compensate for the dry kits. if you plan to get it tuned for the dry kit, by all means, get it.
  13. Cobra_Dusten

    What nitrous set up to use

    im not a fan of dry kits on mostly stock motors. if you are looking for something simple to install, reliable and effective, get the zex kit.
  14. Cobra_Dusten

    stock temp gauge question

    people typically run the 160's and 180's to fool the computer into thinking that the car isnt warmed up, so it adds fuel. however, in your situation you dont really need that. i would run as close to stock as possible, as when the engine is warm, it is far more efficient.
  15. Cobra_Dusten

    Gt40P headers???

    mac P headers, and FRPP P headers are the only shorties that will fit
  16. Cobra_Dusten

    stock temp gauge question

    agreed
  17. Cobra_Dusten

    Machine Shop Questions???

    i just had my block machined. align bored, torque plate honed, mag'd, and tanked, and had my crank machined 010, it ran me about 500 bones
  18. Cobra_Dusten

    Valve springs

    Trick Flow Specialties TFS-2500100 - Trick Flow® Valve Spring Upgrade Kits - summitracing.com
  19. Cobra_Dusten

    Rattling under acceleration???

    its detonation, try better fuel, removing some timing. If it keeps it up, its going to pop your motor.
  20. Cobra_Dusten

    interval governor, what do they come in?

    nevermind, i found one
Top Bottom
Back
Forums
Menu