Search results

  1. SmithAtlanta

    1.7L KB Results - 398hp / 415ft-lbs torque

    Thanks James. Aren't you coming up to T&J soon?
  2. SmithAtlanta

    1.7L KB Results - 398hp / 415ft-lbs torque

    After driving it, it's justified. I gained nearly 100 ft-lbs of torque and 50hp at 3000rpms. I have also already sold my first blower kit so I didn't really lose much money.
  3. SmithAtlanta

    1.7L KB Results - 398hp / 415ft-lbs torque

    Where do I begin? Thanks T&J and Kenne Bell!!! The best word I can use to describe the kit is "thorough". The installation guide contained 200+ pages of detailed pictures and text to describe how to complete each task. It is by far the best installation guide and I've read thru the...
  4. SmithAtlanta

    KB going on soon

    Good choice!!! I'm installing my KB this weekend.
  5. SmithAtlanta

    Last straw: DON'T GET YOUR WORK DONE HERE!

    I, too, was screwed by Dugan. I had them install gears and an aluminum driveshaft and from day one my transmission leaked because of the driveshaft. I drove to their shop 3 times(Roswell to Lawrenceville is a pretty good hoof) and each time they replaced the output shaft seal telling me it...
  6. SmithAtlanta

    Is it possible for T&J to come through again???

    I'm sure Tim appreciates your good comments. I've been a customer since day one and they continue to do great work.
  7. SmithAtlanta

    How often do you s/c guys have to replace belts

    Depends on how hard you are on it, I guess. I have to change mine about every 3 months.
  8. SmithAtlanta

    Kenne Bell 2v 9lb kit...

    Dan, I know about that sensor and I can monitor it on my ODB scantool. I was more interested in the inlet air temperature after it goes through the intercooler. I didn't know if there was such a sensor. My scantool just may not read that if there is one.
  9. SmithAtlanta

    OBD Reader

    I talked to Winston and he directed me to talk to Chris Johnson about that. I haven't done nothing yet since it's not out. I doubt it will be open sourced but it would be nice if they provided an API or something.
  10. SmithAtlanta

    OBD Reader

    I have a different ODB reader(I'm not recommending it so I didn't list it) that has the same feature but I haven't tried it. When I go to the dyno I am typically more interested in air fuel reading and how much timing than the number(although I prefer a higher number :) )
  11. SmithAtlanta

    OBD Reader

    And I think SCT has one but I don't know if it's out yet: http://forums.modulardepot.com/showthread.php?s=&threadid=25267
  12. SmithAtlanta

    OBD Reader

    Here's another: http://www.autoenginuity.com/
  13. SmithAtlanta

    Kenne Bell 2v 9lb kit...

    Yeah, I've heard about the heat issues(but not specifics) so I was just going to keep the boost at 9psi. I was just wondering if anyone had an off road x pipe and long tubes with this setup(9psi). It looks like(from your pics) that you are doing about all you can to cool it down with the...
  14. SmithAtlanta

    Kenne Bell 2v 9lb kit...

    Anyone install one with long tubes and an off road X pipe? I'm about to swap blowers over to the 1.7L KB(just for the low end torque aspect) and was wondering what to expect. I'll be using a 75mm TB(along with 42lb injectors and a 90mm LMAF). Also, does anyone know if I can skip the...
  15. SmithAtlanta

    Has anyone actually used the K40 Laser jammer

    How exactly do you jam or diffuse a laser? I don't think I would buy it...
  16. SmithAtlanta

    New Kenne Bell #'s

    I've been running Magnaflows since a month or so after I bought my car and my numbers always seem to be slightly higher than everyone elses with the exact same setup(but different catback). I never thought that the slightly higher numbers had anything to do with the catback but maybe it...
  17. SmithAtlanta

    Dyno video of 601 rwhp/498 rwtq mustang with stock heads and stock intake

    :doh: :)
  18. SmithAtlanta

    Dyno video of 601 rwhp/498 rwtq mustang with stock heads and stock intake

    This is exciting news!!! Before Chad's car, most people thought that getting to 600rwhp required ported heads and an aftermarket intake. Here's the video: http://www.modularmustangs.net/showthread.php?t=4559 The reason I dont' post the actual video link is because the host might change...
  19. SmithAtlanta

    03 Cobra killer, can I get a H4LL YA!

    Probably should have stipulated that it just got cheaper to hang with a modded 03 Cobra. Of course they can pulley down and get to 460rwhp easily while a GT's block is probably on borrowed time at 420rwhp. I still think you are right as far as the 03 being cheaper to get to 600rwhp but it just...
  20. SmithAtlanta

    601 rwhp/498 rwtq stock head, stock intake!

    I think the video will be up tomorrow.
Top Bottom
Back
Forums
Menu