Search results

  1. Aryan15

    Can I advance timing with spout in?

    Just have someone crank with spout out and turn the distributor till it starts. Make sure its right on the money with tdc and rotor position before you do that.
  2. Aryan15

    FRPP Plug Wires.

    I really like mine. They are numbered and cut to length and look really good with the Ford racing separators. As far as performance goes, I didn't notice a change but they have to be better than local auto parts store wires.
  3. Aryan15

    Battery light on after 3G swap. HELP!!!!!!!

    You can check voltage at the s terminal(with car running) and you can check your connection by checking voltage with sharp probe before and after connection(car running) and using an ohmmeter(not running). Also make sure the I terminal wire(green/red) is not shorted to ground. Use ohmmeter with...
  4. Aryan15

    Which intake?

    I would go for the tubular gt40.
  5. Aryan15

    Piston ring gap positioning ?

    I would just clock them evenly apart. For example with 3 rings, I would space them 120 degrees apart.
  6. Aryan15

    Rewiring Headlights To Only Work With Ignition On

    I would probably mount the relays on the fender or in the dash somewhere. If it were one relay, I would say where the headlight switch is, but I don't know if two of three would fit in there. I used a fuel pump relay for the headlights on my tempo because I don't like the blade connections on...
  7. Aryan15

    gear change need help

    Also make sure to check your contact pattern when your done setting backlash. Its very important.
  8. Aryan15

    Random Pictures

    That red saleen is sweet:nice:
  9. Aryan15

    AOD won't go back in...

    the shaft coming out is normal. Make sure the shift linkage is in park or neutral.
  10. Aryan15

    distributer

    sounds like a Godzilla movie:rlaugh:
  11. Aryan15

    How to run cooler and why am I running hotter after heads?

    I would go with the aluminum 2 row radiator, 180*t-stat, and aftermarket water temp. gauge, and do a good flush of the block before installing your new radiator. IMO, aluminum heads warrant a cooling system upgrade.
  12. Aryan15

    Installing power mirrors, etc

    I don't think it would be all that bad. Just wiring the mirrors through the doors and cutting a hole in your console for the switch sounds like the hardest part. Im not sure what your car has or not, but you'll need the hatch switch and solenoid and the mirrors and switch and all associated...
  13. Aryan15

    will this be safe on my car/fog lights

    You don't have to open up the dash, just the one switch assembly with a small screwdriver. I think it beats using a seperate switch IMO and leaving the fog light switch inoperable.
  14. Aryan15

    C4 no go....

    Try powerbraking it in drive to get the pressure up.
  15. Aryan15

    Code 95 w/MAF conversion

    Its a single pink/black wire going from the fuel pump relay harness to the computer. You just splice into the existing pink/black wire going to the fuel pump. I left mine alone. I don't care about the code and my check engine light never works anyways.
  16. Aryan15

    oil pan

    4.73 liters:nice:
  17. Aryan15

    torque converter flush

    I doubt there is any metal shavings in the converter, but the fluid is really dark. I called around the local shops and they all said they don't have a machine to flush torque converters, just the transmission as a whole. I was wondering if any body has made their own flusher or flushing methods?
  18. Aryan15

    Flush Cooling System

    I hooked up a garden hose to the metal heater tube on the intake, disconnected the bottom radiator hose, and let it rip.
  19. Aryan15

    Few codes from KOER test...

    I'd be worried about the cats if you have them.
  20. Aryan15

    starter/electrical issues

    I would run the big 4 gauge wire to the starter and then jump a small wire across to the other stud so when you turn the key, it does both through the 4 gauge wire.
Top Bottom
Back
Forums
Menu