Search results

  1. B

    $300 for abs sensor install?

    You're getting ripped big time. When I had my gears put in, the sensor was broken so I had to get a new one. I paid for the sensor only. :(
  2. B

    Pics from Victor Ford Car show...Wauconda, IL

    Awsome show again this year :nice: My daughter jacked my t-shirt :D but, that's ok. Hearing the GT90 and the Boss fire up made it worth the drive out :hail2: Of course the burnouts at the end topped it off. :banana:
  3. B

    Victor Ford Car show July 18th, Wauconda IL

    I plan to be ther too. :nice: :banana:
  4. B

    Installing A9P or A9L Computer in a 95 GT?

    You need the PIH(Performance Improvment Harness) kit that is sold by Pro-M. The kit has what you need to use a A9L computer in a 94/95. Go to their web site and check it out. The kit is pretty expensive :notnice: and your cash may be better spent on a twEECer or EEC Tuner if you need to...
  5. B

    Ok, so who's broken something with DRs?

    I run 275/50/15 BFG's. The first time I ran them, I bent the stock 28 spline axle on the driver's side. :( I have since upgraded to 31 spline Superiors and a Eaton posi. No problems yet. :nice: I also have a D/S loop just in case. :hail2:
  6. B

    What kinda aftermarket shift knob you guys have

    I have the MGW Gripper with the 5spd pattern on it. It was discontinued so, I got it for $25.00 :nice:
  7. B

    wow..is my car really that slow?? :(

    Need to go to the track? On Saturday (5/29) the Chicago SVT club is hosting A track day at US-41 in Indiana fron 9:00 - 4:00. Check out their web site http://www.chicagosvt.com/forums/forumdisplay.php3?f=24. I plan on being there myself around 10:00am. :nice:
  8. B

    erratic idle, dies after mods

    If the cold air kit has a bend in front of the mass air, this could be causing the problem. Also check the connecor to the IAT. Sometimes they can pull out slightly when the engine torques over on accleration(sp) causing the check engine(this one happend to me).
  9. B

    Need a trans shop in the Chicago area

    Trans-Pro Transmissions in Lansing, IL. (708)895-0003. Ask for Mike. They installed my clutch and 31 spline Eaton posi/Superior axles. Quality work and reasonable prices. :nice:
  10. B

    95 Cobra: Gt40 or GT40p?

    95 Cobra came fitted with GT40 heads. The 'P' heads were installed on the Explorer SUV. The longtubes should be ok.
  11. B

    Throttlebody Adapter

    Also, don't forget the little filter that's UNDER the PCV valve :D
  12. B

    Why do the Track Gods hate me???

    The midwest SVT club is having a track day on May 28 - 29 at US.41. They are offering T&T for non-SVT cars and bracket racing ect. for SVT vehicles. go to www.midwsetfords.org and look in the events section(the first 'sticky' MSC news) for the details/link to their site. I think it's also...
  13. B

    EEC computer code for our cars

    That's what mine is. 95 GT Coupe.
  14. B

    03 GT newbie... Need lists of local stores in Chicago/Naperville

    They are a Superchips Custom Tuning (SCT) shop. They were trained by Jerry(of Fordchip) to use the new SCT software. :nice:
  15. B

    I was wondering how long you could make a title of a thread so I made this thread

    :nice: Just completed: 31 spline Eaton posi and Superior axles. Purchased 275/50/15 BFG DR's to go with them. :D
  16. B

    MAF help - what fits, what doesnt, PRO-FLOW vs PRO-M?

    ProM has a 'special' calibration for CAI. And they also sell the flanged Bullet meter. At least that's what's on the web site. :shrug:
  17. B

    intake HP gains

    I just did this. Installed a TFS Street intake and 65mm FMS tbody. I got 12 hp at the peak and 16 hp under the curve. Torque went up by 3lb.ft. under the curve and remained the same at the peak. The peaks occurred 700RPM higher for the HP and 300RPM higher for torque. The car pulls strong...
  18. B

    HELP!! need tranny Info please!

    The April Car Craft has a pretty good article on manual trannys. It has some specs on the Tremecs andd contact info for the various companies.
  19. B

    HELP!! need tranny Info please!

    In order to use a 87-93 trans, you need a 87-93 bell housing and clutch fork. You will also need a D/S spacer as the FOX trans is shorter. When you purchase a Tremec, most shops will also sell you the parts for it to work in our cars. Check with Hanlon motorsports or D&D performance. They...
  20. B

    Gears/mileage question

    You need a 23 tooth gear to fix the speedo. Ford does not make one however, you can get it from the aftermarket(steeda, Holcomb, ect.). The highest FMS gear is a 21 tooth.
Top Bottom
Back
Forums
Menu