Search results

  1. JustA5.0

    h/x pipe options with emissions

    Np, I saw your name and it seemed like the responses were from fox owners. There are less X-Pipe options for the fox then the SN-95. Since the Bassani there is only a little more than the BBK, go Bassani. What catback do you have? If it's still stock you won't get the full sound or...
  2. JustA5.0

    Gauge install, hose questions

    Pardon my ignorance, but I'm having a blonde moment wrapping my head around this. I want to put a third gauge in my pod, and was thinking about a fuel level gauge as my stocker shows full 90% of the time, then plummets to E. BUT, wouldn't I need to drop the tank and replace the stock sending...
  3. JustA5.0

    3.73's or wait for 4.10's

    If cost was the same I'd go with 4.10s. But in your case, future Supercharger and I'm guessing your t-lok is smoked, don't pass on the good deal.
  4. JustA5.0

    h/x pipe options with emissions

    Krakah is your car a 94 as per forum name, or a Fox?
  5. JustA5.0

    Headlight Multifunction Problems

    Conclusion: I decided to get more technical and in depth by speaking to Hissin50 through PMs. He explained more tests to do and what the results would indicate. In the end the T/O wire that runs out to the fogs was cut around the drivers framerail under that mass of wires :notnice:. Easy...
  6. JustA5.0

    Headlight Multifunction Problems

    Update: Saleen was right about the MF wiring, I had it installed bottom to top. Swapped that around and everything works again, EXCEPT the DAMN FOGLIGHTS!!! I'm back to square one, except probably $250 in the hole with the switch, wiring, bulbs, relays and crap. Continuity tests performed...
  7. JustA5.0

    Headlight Multifunction Problems

    Saleen, ok that's a bit of relief, the brown wires being for the parking light circuit, not ground. By foglight fuse, do you just mean fuse #15 was bypassed this way? I will check the wiring order, and look deeper into the EVTM section. Keep my fingers crossed :)
  8. JustA5.0

    Headlight Multifunction Problems

    Lol, I actually used those very directions for the soldering. However, the old brown wire did not want to 'twist' together with the new section of wire I added (where the PO had spliced the foglight wire into this). I basically srucnched the new & old together as best I could, wrapped some...
  9. JustA5.0

    Headlight Multifunction Problems

    I used a brass brush and the cleaner, but I'll give it a try gently scraping the wire with a pick. The multifunction switch is new. Headlight harness connector is new, the old one was burnt, but none of the wires looked bad when I transferred them over. Also, I have a Ford service CD and...
  10. JustA5.0

    Headlight Multifunction Problems

    Update: After my limited testing ability and from results in threads I had read here, I ordered a new turn signal/mf switch (SW2443). I didn't have much time before work today when it arrived, but I got the switch installed put the headlight switch back on. Switched it on, went to the front...
  11. JustA5.0

    Headlight Multifunction Problems

    It was raining here before I had to leave for work today, so didn't get a chance to look more into it. I've gathered a few wiring diagrams, but feel free to post what you have it certainly will help. Was your corrosion on the headlight harness connector or the multifunction harness side of...
  12. JustA5.0

    Headlight Multifunction Problems

    Oh the joy of owning a fox mustang, soon this car will be all 2008 parts in an 87 shell :lol: Anyways, I decided to do the GT foglight fix (corral) because it seemed easy to follow and I am by no means an electrical guru. Prior to this, obviously foglights weren't working, headlights...
  13. JustA5.0

    Cracked my lower intake

    Used permatex thread sealant with PTFE, and torqued it down to Ford's spec. :shrug:
  14. JustA5.0

    Cracked my lower intake

    If anything I think the old one coming out f'd things up, like it wasn't threaded in properly when originally installed. I did pull the new sender and the threads appear to be undamaged. Yeah that's a relief it won't cost very much to weld.
  15. JustA5.0

    Cracked my lower intake

    Alright Blue :) After doing some more reading, it seems pretty common to have the intake welded and last. Was worried it might be a band-aid temporary solution. Sounds like it should only cost $50 or less for the actual machine work. The place I'm thinking of taking it to does a lot of...
  16. JustA5.0

    Cracked my lower intake

    This will teach me for wanting to get all the gauges working on the instrument cluster. I replaced the coolant temp sender and torqued it down to the stock 5.0L intake spec, completely oblivous to the fact I have a GT40 lower. Anyways, guess I torqued it down too much as I was doing a coolant...
  17. JustA5.0

    Lowered car pics please

    That green/black one is actually an 85 Civic w/ Mustang bodykit :rlaugh: Oh the color is Neon Camo btw
  18. JustA5.0

    fox springs rated?

    In paper I have that handbook, electronically no. I believe that webpage is just an example of what's inside the book, just happens to be info on the area you need. The book only cost me like $30 though, easily worth it.
  19. JustA5.0

    fox springs rated?

    This page will tell you all about stock Fox suspensions. http://www.bentleypublishers.com/gallery.htm?code=GFM5&galleryId=163 I believe others tend to go with the bit stiffer 400lb/in, 1993 4 cyl front springs.
  20. JustA5.0

    mark VIII fan install

    In the Technical Thread Index sticky there is a link to a 3G install by Roland69. There is also good discussion/debate in that thread on things like where to mount the fuse and extra grounds, which gauge wires to use, etc... I use that thread to refrence my own 3G upgrade.
Top Bottom
Back
Forums
Menu