Search results

  1. nick6690

    Anyone with a 3550 have to get their driveshaft shortened?

    what could cause everything to be out of alignment?
  2. nick6690

    Anyone with a 3550 have to get their driveshaft shortened?

    I can't get my driveshaft to clear the pinion on my rear end when I go to put it in. I tried it with the car jacked up by the frame with the rear end hanging down and it still does it. I have a 3550 in my car and I'm thinking it might be a little longer than the t5 but I'm not sure. Has anyone...
  3. nick6690

    Clutch adjustment goes away after driving

    I have an OEM cable on my car its not aftermarket.
  4. nick6690

    Clutch adjustment goes away after driving

    For some reason I keep losing the my clutch adjustment after driving for a little bit. I can have it adjusted perfectly then I'll go drive it somewhere and when I try to drive it again its really hard to get in gear and the clutch grabs at the very bottom. It's almost like the cable is...
  5. nick6690

    Dyno tune worth it?

    Do it!!! My car was a dog when I got done with the h/c/i but after I got it tuned it turned into a completely different car. It sounded different, drove different and it turned into a beast. You will definately be happy with your car when its tuned.
  6. nick6690

    Strangest CL Mustang ad

    I'd hit it
  7. nick6690

    Pics of GTs with bumper cut for tailpipes

    If you do it you have to grow a mullet.
  8. nick6690

    People amaze me

    I can't believe how much people are asking for Mustangs and Mustang parts. 1993 Mustang LX 5.0 Coupe (Under 600 original miles!!!) I saw an add a couple weeks ago for a stock hood and the guy was asking $400 :nonono:
  9. nick6690

    Struts for a Street/Strip car

    What are some good struts that will handle good on the street and give me plenty of weight transfer at the track? I cant really find much information about adjustable struts and the different positions they have. Thanks for the help.
  10. nick6690

    general questions about turbos/stock block

    I've thought about this a lot also and I've decided Im going to go with a 351 based motor then turbo that so I'm not pushing the limits of the stock 302 block because once I've gotten used to 500 or so hp im going to want more haha.
  11. nick6690

    What do yall think about these brakes?

    thanks man. yea im probably going to get them i need to do front brakes on my car, my baer drilled and slotted rotors are cracking between the holes.
  12. nick6690

    What do yall think about these brakes?

    http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=190383296633&viewitem=&sspagename=STRK%3AMEWAX%3AIT Its a pretty good deal but do they look decent?
  13. nick6690

    2 step wiring

    I got a 6al box today to hook up 2 step on my car and I got it all wired but I can't figure out where the wire goes that goes into the clutch pedal switch. I searched google and found that it goes on the red and blue wire but there are 3 of them. How do you wire it to the switch? Thanks
  14. nick6690

    3" x pipe

    X-PIPES vrs exhaust is amazing
  15. nick6690

    This may sound dumb, but I can only smoke the tires in reverse

    Your car is begging for some 4.10's That will definately help you roast em.
  16. nick6690

    MSD 2 Step

    Ive been wanting to put 2 step on my car for a while now and so I picked up a 2 step module the other day but i have yet to buy an ignition box. What other brands of ignition boxes are compatable with 2 step besides the msd 6 series boxes? Im just wondering because there is a Summit racing...
  17. nick6690

    Mac header install nightmare

    thanks for the tips :nice:
  18. nick6690

    Mac header install nightmare

    ok i finally got them in today. i had to bolt them up with the motor jacked up but it was still a PITA and they still hit the k member. im definately getting bbk's next time i buy headers.
  19. nick6690

    Mac header install nightmare

    i have the headers in place and everything i just cant get them to bolt up to the heads straight without them hitting the k member. i bought them off craigslist and the guy said he ran them on his fox for years without a problem but i cant seem to get them to line up right on mine.
  20. nick6690

    Mac header install nightmare

    i jacked up the motor and took the steering shaft off but the main problem is where it hits the k member. are these headers supposed to be for a tubular k member?
Top Bottom
Back
Forums
Menu