Search results

  1. 03-s281

    Roush Pics of my 89

    Coast High Performance 347ci short block with 10.5 compression
  2. 03-s281

    Roush Pics of my 89

    I did not lose any low end torque at all. Here is a video of it on the dyno. This is superflo numbers and they read lower than a dynojet. On a dynojet my car makes 360rwhp-400rwtq http://host.stangsource.com/sloryd/SD%20dyno%20vids/LeeSwiftdyno1.wmv
  3. 03-s281

    Roush Pics of my 89

    Correct. Thanks for the saving me me some typing. I need a rear wheel. Thanks alot man!
  4. 03-s281

    Roush Anyone Ever added an offroad X-pipe and lost Power???

    It may have just moved the powerband up alittle. You will not lose any power from it. Alot of it is probably in your head too, you may have been expecting a sotp gain and didnt get it. Throw a different set of gears in it and that will solve that problem.
  5. 03-s281

    Roush Pics of my 89

    I havent been on the boards in awhile so I figured I would post a few pics of my 89. I sold the 03 awhile back and ended up in this. 80k miles and a decent amount of mods. I am also looking for 1 16x8 5 spoke ARE wheel. I have 3 but one was damaged. Man, its almost imposible to find these!
  6. 03-s281

    Roush So Pissed off!!! (tires)

    First thing a Saleen needs is a good alignment. with the way the toe is set from the factory the stock fronts will be toast in 15-20k miles.
  7. 03-s281

    2003 Mach I

    Damn you young guys have HIGH insurance. Mine is less then 100 a month for full coverage and 100 deductable
  8. 03-s281

    2003 Mach I

    Or you could buy mine for that, lol 23 doesnt seem too awfull high for a Mach with that low of miles if thats there starting price. You could get it for 21k I assume
  9. 03-s281

    Viper wants to play!!!

    You have no clue what you are talking about. Vipers shine in the 1/4. My good friend has one and I have watched that car run stock and modded in its current form. Low 12's high 11's stock and when modded they get sick fast. He has the stock 3.08 gearing and still cut a 1.48 60ft with completely...
  10. 03-s281

    Pics of the new 03 Cobra

    You should put that your girlfriends dad has a Cobra in your sig!
  11. 03-s281

    GF'S DAD MIGHT GET AN 03 COBRA

    WTF
  12. 03-s281

    31 spline moser axles

    It wont have any advantage if you dont plan on darg racing the car or running sticky tires. If you do, upgrade.
  13. 03-s281

    Roush saleen or C6 vette?

    For 129Saleen, I read wrong and thought you said a Z06. My mistake, and I hope you build your motor before you put a 14lb pulley and a 150shot, lol. And for wsbrigham, I did not realize you put down almost 600rwhp. Very impressive. and I know all about power and how it used, I have spanked...
  14. 03-s281

    Roush saleen or C6 vette?

    I call BS on both of you that said you pulled LENGTHS on a C6 Z06. I have seen a couple at the track BONE STOCK trapping 125 and running high 11's. No way a blown 10lbs 2V or a blown HEAVY 05-06 will pull a new Z06.
  15. 03-s281

    Roush Track Times

    beautiful car! Being non pi and being so heavy I think you would be high 14's at best in the 1/4. Do the PI swap, add some LT's, tune, gears, and tires and you'll be in the 8's. I have ran a 7.9@84 in my NA 03
  16. 03-s281

    LCA's - Spend the big $$$$, or go the cheap route???

    Go with the UPR's if its gonna be at the strip more then the street. I cut 1.60's since adding mine.
  17. 03-s281

    8.8 in 01 GT upgrades, need advice

    You can buy it at BB&T racing, great guys and ships very fast. I ordered my prostars on a wed afternoon and they got here the next day
  18. 03-s281

    8.8 in 01 GT upgrades, need advice

    You can go over to www.modulardepot.com and do a search on eaton and find 3-4 people that have grenaded them. I believe Bill Putnam and Bob Cosby run the TruTrac. I got the Moser axles because of there reputation for being so strong. But both are good I'm sure. TA makes 75% of the covers...
  19. 03-s281

    8.8 in 01 GT upgrades, need advice

    Stock axles and diff are 28 spline. The cover is just in case the rear explodes so you can keep all the parts in the pumkin instead of all over the starting line and pissing everybody else off when they have to wait 1hr so they can reprep the track. And its alot stronger:nice: and you can change...
  20. 03-s281

    8.8 in 01 GT upgrades, need advice

    Detroit TruTrac 3pinion design Moser 31 spline axles w/3in studs Moser girdle cover with main caps welded axle tubes and torque boxes. Launch from the moon!!:D
Top Bottom
Back
Forums
Menu