Search results

  1. bynumj

    new best all motor but still working out some issues.

    What is your redline set at? What is your current 1/4 mile RPM at? I think you need shorter tires and more gear to dial it in. I am assuming that you do not want to say NA and tune from here. Here are my calculations: Currently with the 27" diameter tire and 108MPH at the 1/4, you...
  2. bynumj

    Updated Gear Chart

    Here is my updated gear chart that will cover the 2011s. Instructions: 1) Download File "Gear Chart2.txt" 2) Change ".txt" to ".zip" 3) Extract Excel file from zip Enjoy the new tool. If you see any issues with the chart, let me know.
  3. bynumj

    20" Rims - Can I see them pls

    I like the CS 67s, but my setup requires the lower springs to make it look right.
  4. bynumj

    What color is this Mustang?

    Red Candy Metallic
  5. bynumj

    new suspension setup need help!!!

    +1:nice:
  6. bynumj

    young stallion 2006 gt seeks advice! 911

    Bang for the buck! You will get a lot of advice and here is my .02 worth. Keep in mind that I have looked at the options and this is from my experience. 1) Get a set of 3.73 or 4.10 gears. $650 installed. 2) Short throw shifter. $300, this is a do it yourself job. 3) You must get...
  7. bynumj

    New Magnacharger

    IMO gears are not pointless. They will be money well spent and a must mod for your car, even with the supercharger. Not just saying it, I have done it.
  8. bynumj

    Slight vibration at 3400 RPM????

    After deliberation with some of my race buddies, we believe that it is a harmonic caused from the exhaust.
  9. bynumj

    Throtle body or gears?

    +1
  10. bynumj

    Slight vibration at 3400 RPM????

    I am just thinking that if it were an engine vibration that I would have to worry about that it would happen at other RPMs but I am not sure. I just didn't want to have Pop Goes the Motor over something that I could have fixed. I think I will take it to our local Pro shop and have them weigh in.
  11. bynumj

    Slight vibration at 3400 RPM????

    It happens in 1, 2, 3, 4, N, clutch in, clutch out, moving, or stopped. The only constant is that it happens at 3400 RPM. This leads me to think that it is a vibration in the motor or a harmonic of the exhaust.
  12. bynumj

    Slight vibration at 3400 RPM????

    I noticed that I am getting a slight vibration feel in the shifter at 3400 RPM. At first I thought it might be the trans or drive shaft but after some testing, I get the slight vibration feel with the clutch in or out, moving or stopped. This only leaves two options: 1) there is a vibration...
  13. bynumj

    Gear Chart

    If you changed the file to an Excel file (.xls) or used the "open with Excel" and saved as an Excel file, you should see a pull down menu for the highlighted areas that allow you to change the gear ratios. If the pull downs are not there, let me know.
  14. bynumj

    Gear Chart

    You have to save the file and change the extension to .xls because this site will not let you download an .xls file.
  15. bynumj

    3.31 vs. 3.55

    If your main intrest is the 1/4, put in 4.30 gears, I wish I had done it. I have a thread with a gear chart; do a search for "Gear Chart" with bynumj as the poster and you should be able to find it.
  16. bynumj

    Gear Chart

    I keep seeing questions about gears and RPM on here so here is a gear selection chart that should help. The chart will let you select tire size, gear ratio, transmission, and speeds. I hope it is helpful. To get the chart to work, change the .txt to .xls for the Microsoft excel file or use...
  17. bynumj

    4.30 Gears

    If you do not plan on racing the car, get the 3.73 gear. If you want a little bit more go and do not mind the higher RPM on the highway, get the 4.10 gear. If you want to get it on like Donkey Kong, get the 4.30 gear (I wish I had gone with the 4.30 because I like to race the car and hot rod it...
  18. bynumj

    Any good places for disc. wheels?

    Those are the CS67 wheels I have. They come in three colors: black, gray, and chrome. I have the black 20 inch ones. I you want drag radials, get the 18s.
  19. bynumj

    Parking Lot Bumpers

    I have never had this problem because I treat parking lot curbs as if they are walls. I do not get near them. In addition, why are you holding the restaurant responsible? You are the one driving into the parking lot and with the knowledge that parking curbs have be an issue in the past...
  20. bynumj

    Rally Gauges

    Almost done. The photo is actually a conceptual depiction to demonstrate my idea to see what people think. I am currently fabricating the triple gauge setup with a raptor light. I am almost done with the gauge pods and will post actual photos soon; I have a few bugs to work out with the...
Top Bottom
Back
Forums
Menu