Search results

  1. S

    Shocks? or Springs? or Shocks and Springs

    Go to each side and push the fender down if it goes down more than an inch you need new springs. if you push it down and let go and it doesn't stop new shocks. That's what i've heard at least.
  2. S

    Rolling fenders

    The place i'm getting the fender roller from provides a heat gun with it but thanks, i might pick one up if its only 10 bucks
  3. S

    Spriings Question

    Hey guys, I've been trying for a while to try and put together a suspension package for my 66. First and foremost I need to get new springs. I can push my car down at least an inch on every side, and according to suggestions that means that the springs are worn out. Second, i don't think...
  4. S

    Rolling fenders

    Thanks for the replies. I was looking at the two ebay places as well i might go with one of them. I was also thinking of Fender Rollers Now Available - Team Integra I'll call them sometime this week, and see how much it is for their shipping, if its a lot i'd rather go there and pick it up...
  5. S

    Rolling fenders

    Hey guys, I need my fenders rolled. I've called a few body shops and they want 700$ to roll my fenders. I've searched around the forums and came to the conclusion that for me the eastwood fender roller would be the best/safest bet. The problem now is finding a place that has it/ willing to...
  6. S

    wiring problem

    is the harness any specific brand? painless or ez wiring?
  7. S

    Suspension Question

    Oh sorry about that, I'm running foose legends 17x7; with215/50R17 How about raising the rear? and is there any difference between 4 and 5 leaf. In terms of ride will it change for the better? Edit: i got 17 x7's not 17x8's =\
  8. S

    Suspension Question

    Hey guys, as some of you may know its time to replace my springs. Shocks seem to be fine, when i push the car down it goes down about 2 inches and when i let go it comes back up instantly, doesn't bounce. This is a daily driver/weekend warrior, completely stock, as for stance, i'd like for 2...
  9. S

    Speedometer Cable Question

    From what i've heard if you're replacing and the housing (the black rubber part around the metal insert) then it should come pre-lubricated. However, i have had one of those and it ended up breaking only 2 months after. It looked like a lack of lubrication. So i'm not sure
  10. S

    Mustang *Pics*

    yup a 66, the gas cap is a 66 style nice ride
  11. S

    Need some help

    For the time being i disconnected the wire that goes to shifter light, i cut it off and wrapped it in electrical tape. it was spliced with instrument light wire. I think the reason the fuse didn't blow was because it got to the switch first. I didn't put a fuse between the lights and the...
  12. S

    Need some help

    So last night i was driving and i stupidly put the car into the lower gear, (automatic) when i did so all the interior lights shorted out, like the instrument panel and the light that is under the shifter. I then smelt smoke and burning plastic. i turned off the car and lights and sat there for...
  13. S

    look what i brought home!

    Congrats! it looks real nice.
  14. S

    WHAT'S NEEDED FOR COUPE TO FASTBACK CONVERSION?

    66 Mustang Conversion
  15. S

    Going to look at a 67 Coupe...

    Sweet! congratulations;
  16. S

    Going to look at a 67 Coupe...

    If everything else but that floor plan is ok then 4200 is a decent price. I remember when i was searchin for 67 i couldn't find anything under 13k. The ones that were 13k had just painted over the rust.
  17. S

    Hello from San Jose NorCal

    The Ez kit is available on ebay here and there, i ordered it from a local parts shop. The difference between painless and EZ wiring is that Painless comes with all the terminals crimped and everything done for you; it's practically drop in. Depending on which painless harness you get...
  18. S

    Hello from San Jose NorCal

    My .02 Shop manual: I bought the pdf version of the shop manual on cd for 20$. I got it from National Parts Depot, and the scan quality is really good. Diagrams for wiring u can find online As for wiring, if your not looking to keep it all original i'd go for a generic harness like ez wiring's...
  19. S

    Hello from San Jose NorCal

    Sounds like you should also replace the wiring harness; is there any major rust on the body? floorplans? I know it's probably a cali car but its always good to check. How about a rear bumper? Drip rail moldings, i can't tell if u have front and rear windsheild molding; Side/ rear view mirrors...
  20. S

    Rims and tire question

    I believe he said air bags, he said the rear shocks were in good shape. he said he was thinking of putting them on and filling them with like 30 psi and it'd be fine. he said it'd be like 190$ It doesn't really bounce, it comes up and stays there. As for when i push it down, i'm pretty sure...
Top Bottom
Back
Forums
Menu