Search results

  1. 4MuscleMachines

    65-70 Mustang Subframe Connectors

    Brand new in the box. Purchased from Mustangs Plus. Here is the link for info. http://www.mustangsplus.com/Merchant2/merchant.mv?Screen=PROD&Store_Code=MPFMP&Product_Code=04092&Category_Code=subfrm I will sell for $75 delivered which is less than half of what I paid with shipping. I...
  2. 4MuscleMachines

    here are my choices for the torino!!!! vote now please read options prevoting

    I like the 18" AR Cobras. I will probably get them for my 71 Mustang.
  3. 4MuscleMachines

    WANTED: LeCarra steering wheel and adapter

    I have a new Lecarra to Grant billet adapter that is still shrink wrapped. You can have it for shipping only which should be about $6. You can email me if you like, I don't log on too often.
  4. 4MuscleMachines

    Has anyone installed the new Tremec TKO in a 69/70 Mustang?

    No disrespect to chillininnh, but I would recommend www.moderndriveline.com over Keisler anyday.
  5. 4MuscleMachines

    Anyone know where to get a stainless tank for 71-73 Mustangs?

    Did you order for a 71-73 Mustang. I could not find the application in their catalog.
  6. 4MuscleMachines

    Has anyone installed the new Tremec TKO in a 69/70 Mustang?

    The ONLY cutting you might have to do is the shifter hole notching on one side. No raising the trans tunnel, I am certain.
  7. 4MuscleMachines

    Anyone know where to get a stainless tank for 71-73 Mustangs?

    I am looking to upgrade the fuel system for an EFI application and I have been unable to find a stock replacement stainless fuel tank. Only the crappy repro stuff. Anybody have any leads or ideas?
  8. 4MuscleMachines

    Please Ignore

    OK, will do.
  9. 4MuscleMachines

    These cars are getting very hard to find.

    PM me your email address. I have a very nice 65 I am selling. A bit more than $20k but I have been collecting for over 20yrs and I can say this car is nice and solid and has a 427 stroker. All professionally done.
  10. 4MuscleMachines

    Cobra master cylinder question for mdjay and others.

    I used the JMC dual unit with 1" front and 7/8" rear bores and the effort is still too uncomfortable for me and I am 6'2" and 240 lbs. I even have the six piston Wilwood front brakes which should have made the effort easier since the pads are smaller, but I believe it had the opposite effect.
  11. 4MuscleMachines

    Wilwood Brakes and TCP Suspension

    Which brake kit are you going to use? If you use the 4 piston Dynalites, there is also a spindle option from a Granada and not a Mustang with zero offset. Since the offset would change with Mustang Spindles, I opted for the six piston 13" rotor and it spaced them out even more than the...
  12. 4MuscleMachines

    show me ur fog lights

    Here is another:
  13. 4MuscleMachines

    HELP, I need 2" headers...

    Where are you getting them from?
  14. 4MuscleMachines

    70 Radiator in 65 Mustang

    427W. Thats for the link, I will definitely be using it.
  15. 4MuscleMachines

    70 Radiator in 65 Mustang

    OK, I just checked the 65 and my top inlet is passenger side and outlet drivers side. So I am ok, I was sweating there for awhile.
  16. 4MuscleMachines

    Nitto NT01's

    I ended up with 245 17's front and 275 17's out back. They are slightly wider than most tires the same designated size. I really wanted to go with the 18's but their profile was too low and they wouldn't look that good at a 25.4" diameter on an 18" wheel.
  17. 4MuscleMachines

    1970 Boss 302 Value *Pics*

    Having owned over 5 Boss cars, I can tell you from experience, about $27-$30k IMO. Just need to get a Marti report to make sure if all the items are truly original to the car, especially the shaker hood option and the rest of the engine and drivetrain. If so, $30k sounds about right unless it...
  18. 4MuscleMachines

    70 Radiator in 65 Mustang

    Mine is just like yours, that pic is just for reference (and not a good one at that). Here is a pic of the actual unit, it looks pretty big. BTW, I found the brackets in a kit if anybody else is thinking of doing the same thing. Pricey but they mount it right...
  19. 4MuscleMachines

    Where to Order MPG Export Brace

    I agree, I only bought it because it is the only trick brace offered for a 71-73 Mustang.
  20. 4MuscleMachines

    Where can I find a lite weight flywheel?

    For whatever it counts, I read an article in PHR stating aluminum is a change for the positive on a street driven car. I have always used steel since that what has always been recommended to me. But to me it makes more logical sense that an aluminum fly is better than steel except maybe for...
Top Bottom
Back
Forums
Menu