Search results

  1. chaka

    Needle valve

    Make sure you plug that disconnected gas line (feed) or you may have some fire issues.
  2. chaka

    New MII WebPage!

    Ditto on those bouncing Cobra & Ford, and Trailing mouse. Great job though. Pics are :nice:
  3. chaka

    Rear End! From 7.5 to 8.8 HELP!

    The hard brake-line will need to be extended for the 8.8. The T is located just to the left of the diffy while the 7.5 has it midaxle on the passenger side. It is an unbolt bolt in swap besides the the brake-line.
  4. chaka

    Defroster Problem

    :rlaugh: Yes it is a pain. Ford has this thing about burying them. :nonono:
  5. chaka

    Defroster Problem

    May still be your heater core. Try bypassing it and see if it changes. Your A/C would help dehumify the air but I would lean more towards the heater core. 15yrs is plenty of time for it to rust out from the inside.
  6. chaka

    429 swap?

    You can run power steering and power brakes. Some even run A/C. The power brakes interfer only when you use tall valve covers. But can be fixed by moving the booster over an inch. Plenty of room for the power steering pump. And the only problem with steering is at the u-joint sometimes. But it...
  7. chaka

    Need help finding a car in MA!

    Hey don't be hating on Dorchester. :nonono: It can be shady at times, but it isn't that bad. Are you forgetting about Roxbury and Mattapan?
  8. chaka

    Need help finding a car in MA!

    Have you picked up a WantAD? Always something in there.
  9. chaka

    Remember awhile back when somebody posted a pic of a factory long tube header...

    You need some backpressure. Don't want to lose too much torque.
  10. chaka

    Tranny Cooler Help!?!?

    You can either use a compression fitting between the hard lines, But as long as you use EFI fuel line with hose clamps and flare the hard line a bit it will hold.
  11. chaka

    Tranny Cooler Help!?!?

    They sure as hell are pressurized. I have used steel brake lines. You can buy the line at Autozone. It has two fittings. You will have to match it up. Want to say 5/16" line but am unsure. Then to go to rubber I use EFI rubber fuel line and add a flare at the end of the hard line for a better...
  12. chaka

    Subaru

    There is no replacement for displacement, hell I have a 460 under my hood. But why is it being rice to say the WRX STi is a fast car? Last time I looked the ricer boys are the ones with the fart cans and spray painted rims that are all show AND NO go. The WRX STi and Cobra ran the same...
  13. chaka

    Subaru

    The WRX STI does have a hideous wing, but 300hp out of a 2.5L factory engine is impressive. Subarus are one of the best engineered automobile out there, hands down.
  14. chaka

    The

    It is that tech sticky. Everything you need to know is in there. So instead of use yelling at them "to search it has been discussed a million times" They just go to the sticky. What ever happened to Wish?
  15. chaka

    just alot of problems

    Driver's lean. I have the pass. lean. :confused:
  16. chaka

    Ranger Cam & Cam Followers

    Take the springs for the roller cam. What year do you have. You may have the roller cam already.
  17. chaka

    10 Sec V6

    He could be talking about his dirtbike. Honda makes the CR line. I know they drag the things. Not sure if it is a 1/4 mile though. Just a thought.
  18. chaka

    I know you guys have all heard about the movie "The Passion of the Christ".

    I plan on seeing this weekend sometime. Should be a great film
  19. chaka

    raising the Rear end

    JC Whitney. Part #: 86SA5260B 2" to 4" higher lift.
  20. chaka

    Head Swap

    I have been told never to reuse them. Because once they are torqued down they have been stretched. And when reusing them you will not be able to torque them correctly. This is what I have been told. I have reused the 12 point head bolts before w/ no problem. Never had to deal with the 'torque...
Top Bottom
Back
Forums
Menu