Search results

  1. N

    Single strut bar brace for '99-'01 4.6L stangs?

    Just look one up thats for a Mach 1. They can't use a 3 point because of the shaker set up. Not functional? How so? Your tying the strut towers together(and they do flex) increasing the rigidity of the chassis. This allows the suspension to do its job better. If I remember right, the 96-97...
  2. N

    New Edge vs S197

    A buddies 06 auto GT has run 13.5xx on stock tires with a tune,intake, and axleback exhuast. I raced him at the track and beat him to the stripe even though he ran 2/10s quicker all because I tree'd him. :Track:
  3. N

    Is it true??

    That dude is full of it. Same power rating as my 01.
  4. N

    Tire Question.............I searched

    I run 255/45s on all 4 corners on my 01. Helped fill the fender gap(mines not lowered)and is a bit wider. I think it looks perfect, handles better than before, and no issues to speak of. Tire guy argued the speedo would be off, even though I could fix it with my tuner its dead on according to...
  5. N

    Tons of pics from Mid America Ford and Shelby meet

    I was a little surprised at the times people were turning at the dragstrip. I would have thought several of the cars I saw would have been quicker. Although one of the guys I was with said his times were off a little as well.
  6. N

    Any differences between new edge GT's?

    For 2002 the Mach 1000 audio system with MP3 capability was available with 2 subs and 4 amps in the trunk....
  7. N

    Anybody know where I can find official 0 to 60 times?

    This is from Motor Trends online archives: Significant engine tuning on the '99 4.6-liter modular V-8 has lessened our "all bark, no bite" criticism of Mustangs since '94. At the dragstrip, the '99 GT's performance numbers, though great for a Mustang, are still not tops in this muscular...
  8. N

    Any differences between new edge GT's?

    01' was first year for Bullitt rims, taller hood scoop, and factory tinted headlights. I think I read somewhere the 01's harmonic balancer has most mass of all previous years of 96' up. Mass air sensor wiring is slightly different on the 02-04s. Mid year of 01, the 3650 5-speed was swapped...
  9. N

    What do you guys think about the new Camaro?

    Its ugly inside and out, itll be expensive, and Im sure itll be cheaply built outside of the powerplant like all the rest.
  10. N

    throttle body/plenum questions

    Unless your gonna put a S/C on it or do headwork, the stock 65mm TB flows enough air. I changed just the upper plenum(I got the C&L cheap). Did pick up a few hp but it leaned it out enough to need a retune.
  11. N

    Handling?

    Since your suspension isn't stock anymore, a performance oriented shop would probably be your best bet for setting it up correctly. Sounds like you either have too much negative camber or too steep caster.
  12. N

    Did I hook up my trans cooler wrong?

    Cool your guns there son. Sorry I didn't do a in depth study on this. I don't think its too difficult to figure out though, passing a cooler liquid next to a warmer one, some heat transfer will occur once the engine is up to temp. I didn't say it was gonna boil it. I don't even run a extra...
  13. N

    Did I hook up my trans cooler wrong?

    The tranny line going into the bottom of the radiator is the hot line. So your not getting as much cooling effect because it will heat back up a bit because of engine coolant being between 190*-205*F.
  14. N

    LT headers?

    Technically, if you remove the factory cats or change their location, its not legal. According to the EPA written law, only factory replacements are legal and LTs aren't legal reguardless. LTs relocate the convertors and O2 sensors that are close to the factory manifolds, thus not legal...
  15. N

    LT headers?

    Stainless steel that is ceramic coated is best. Helps keep underhood temps down as well as additional corrosion resistance.
  16. N

    Knight Rider TONIGHT!

    and just as I suspected....its sucks
  17. N

    Highest aspect ratio I can run?

    Best thing you can do is go here http://www.tirerack.com/tires/Spec.jsp?make=BFGoodrich&model=g-Force+T%2FA+KDWS&partnum=445WR7GFTAKDWS&vehicleSearch=false&fromCompare1=yes&place=6 and look at tire specs and see how much effect the ratio has on the OD of the tire. A wider tire of the same...
  18. N

    aftermarket taillight pics

    :rolleyes:
  19. N

    aftermarket taillight pics

    I would like to see pics of your aftermarket taillights/modifications. Considering changing the stockers for a new look. Only want to see 99-04.
  20. N

    What sized nut

    Best I can remember that nut takes a 15mm socket, can't remember the actual size..:shrug:
Top Bottom
Back
Forums
Menu