Search results

  1. 9

    Spintech Side Exhaust - Installed

    Geez! If you had a Dr. Gas off road X for your full lengths you would have my dream exhaust system........
  2. 9

    How do I set the idle...my idle is low...need it back up...

    You can do that, but remember that you have to reset the tps voltage after you move the screw. I always set my tps voltage to .95 The other way you can adjust it is to get the idle adjuster available form Ford. It installs in ten minutes, and works pretty slick
  3. 9

    harmonic balancer R/R

    I bought a cheap puller for $12 @ champion auto, you don't need an installer, just push the new ballancer on as far as it will go and thread in the screw, it will pull it on. The biggest bitch is getting the big bolt loose. Keeping the balancer from moving is hard. I had to put a big ass...
  4. 9

    Opinions on the Proform electric fan

    I have a ProForm fan. I have not had a single problem with it. It looks just like the Black Magic fan.
  5. 9

    Best Mufflers for Stock 5.0?

    I have a Magnaflow cat back, it sounds stock at idle but wakes up @ WOT. It isn't the loudest thing out there. I am running a catted x right now......Those mufflers are stainless. I ended up buying the mufflers and some flowmaster SS 2.5 inch tails. The magna flow tails are absolute crap...
  6. 9

    smog pump delete

    to plug the holes you will need a 5/8-11 (coarse) bolt. Or you could go to Ford and ask for thermactor plugs. There will be a lot of carbon in those threads. It may seem likr they aren't there, but they are. I sprayed the hole with carb cleaner and worked a bolt back and forth ( like tapping...
  7. 9

    Fuel System Upgrade... learned a lesson...

    I have a 255 lph pump. To rememdy the problem I am just setting the pressure so it goes down to 40psi when it warms up.
  8. 9

    dead battery help

    How would a person run an aftermarket tach without running a wire to the battery? I have 1 wire going to + terminal, 1 wire going to - and 1 to fuse box for lighting. Where should I hook up the hot wire? Ignintion switch? Where?
  9. 9

    Fuel System Upgrade... learned a lesson...

    Let us know if your fuel pressre drops from the original setting when your engine warms up. Mine would be set @ 40psi cold, then as I drove a few miles the pressure would drop to about 36psi. Still happens every day. Cold=higher pressure Warm= lower pressure. I haven't been able to make sense...
View older results
Top Bottom
Back
Forums
Menu