Search results

  1. sn9550

    Global West LCA Install ?

    You may have installed the lca on the wrong side? Check and see if the mounting flange for the sway bar is offset to one side of the lca.
  2. sn9550

    Best way to spend $$$$?

    For that kind of money I think you'll be looking at 87-93's. I would look for one with the best body/interior that I could find. To me the mechanical stuff is cheaper and easier to fix. 94-95 are nice and may be in your price range. The chasis is slighty stiffer and the interior is a little...
  3. sn9550

    BATTERY??

    Your starter is probably going out. This happened to my brother except the insulation, on the small chassis groung, caught fire. He replaced the negative battery cable and pigtail as well as the starter and it was cured.
  4. sn9550

    Is this combo to much for an AOD?

    It's not going to fold because you add H/C/I. I have no idea about that cam but I hope you have or are planing on gears, shift kit, and a converter. I haven't had any trouble with mine :nice: . It was rebuilt by the dealership about 60k ago. If it is in good condition it will last. It also...
  5. sn9550

    Which Cams work with speed density ?

    The Crower 15511 and several Comp 260?? and 270?? cams will work.As you said 114 lsa, 220 or less @.050 duration but each car is different. To me, if all your going to do is change the cam, it's not worth the hassle and expense. My boy is 16 also and I am looking for him. A friend of mine has...
  6. sn9550

    Rear Bumper Cover Install

    You should be able to do it yourself. There are a couple of screws in the rear fender and you may have a supporting bracket for the bottom of the GT cover. The rest you'll access from inside the hatch area. Remove the two interior panels along the back of the hatch. You may have to loosen the...
  7. sn9550

    Is there anyone on here that actually knows what they are talking about?

    I wouldn't worry about switching to mass air right now.That cam "should" work with sd but each car is different. From your signature you don't have that many power mods. Your et isn't all that great but, for your mods, Your mph is pretty good. I'd work on heads, intake, and throttle body for...
  8. sn9550

    90 Mustang 5.0 AOD

    I agree with the others. Gears, valve body/shift kit, and converter. These mods will make it a whole new car!
  9. sn9550

    Bassani Recommendations

    Houston Performance and The Racing Zone, both in Texas, have good prices.
  10. sn9550

    Electrial wizards plz read... Cranking car and ground wire melted.... more.....

    More than likely it's your starter going bad. Get a new starter and cables and I'd be willing to bet no more problems.
  11. sn9550

    Will Cobra Intake Work

    Agree with the others! It will work just fine.
  12. sn9550

    My GT will be sold back to the Local Dealer

    Godspeed! Semper Fi!
  13. sn9550

    P/S Hose Routing w/ A/C Delete?

    Check out my Stangnet photo page.
  14. sn9550

    P/S Hose Routing w/ A/C Delete?

    The pressure hose for AC cars works but it's a little on the long side and it comes close to the power steering pulley. You can get a pressure hose, for non AC cars, at your local auto parts store.
  15. sn9550

    Will midpipe from a 94/94 fit on a fox?

    It will fit but the hangers won't work so go ahead and cut them off. Get some heater hose for the air pipe. I believe it's 3/4". I cut the hangers off 87-93 mid pipes because they're a pain in the neck to line up. The UPR X pipe doesn't even come with them.
  16. sn9550

    RE: Ported Cobra Mass Air Meter

    I did that to the meter on my 95 and had all kinds of problems. That thing would ping constantly under the slightest load. Now with my 88 I don't have to run one :) , yet. Glad you got it straight.
  17. sn9550

    P/S Hose Routing w/ A/C Delete?

    There are two different length pressure hoses. One for AC cars and a slightly shorter one for non AC. It has a little different bend for the pump side fitting. I got a pressure hose for a non-AC car. It fits better.
  18. sn9550

    pinion depth gauge

    Don't waste your money on the Proform piece of junk! You'd be better off with out it. It is very poorly manufactured.
  19. sn9550

    I ordered my Vortech SQ S Trim!

    Nice slide show. Man, you sure could use some Simple Green.
  20. sn9550

    Need Help selecting right size ET Streets!

    I agree with the others. 26x10.5x15's. That's what I have. I go through the traps at 5500rpm. With 28" tires you'll be running a little less rpm through the traps. That may or may not work for you. I wouldn't go any wider than 10.5 though. I'd try and get some from somebody I knew but that's up...
Top Bottom
Back
Forums
Menu