Search results

  1. ttopstang

    Quite a find I think, 92 GT

    You would do more harm than good with a maco paint job, or any $750 paint job. I paid $3500 for my 87 gt and it was in far worse condition than that one is, so I would say you could get mid 3s for it.
  2. ttopstang

    Need some help removing bushings

    Check this out. I was sitting around and really wanted to get those bushings out, so I decided to get the sawzall. :D http://s1237.photobucket.com/albums/ff472/slowman9786/th_REARDIS007.jpg?t=1285203724 http://s1237.photobucket.com/albums/ff472/slowman9786/th_REARDIS006.jpg?t=1285203724
  3. ttopstang

    Need some help removing bushings

    Thanks rick, I was hoping I could reuse those, but I guess I'll have to ask my wife for a few more $$
  4. ttopstang

    Need some help removing bushings

    The thing is, I've got a rear end with good factory bushings from a 2000 model, and I want to put them on mine. Mine fell right out. I just need to take caution when I take the ones out of the other rear end so I can use them in mine. I used the search button and came up with nothing...
  5. ttopstang

    Need some help removing bushings

    Anybody got any tips or tricks to remove the upper control arm bushings from the rear axle housing? Is there a tool I can rent at auto zone to make it easier? I also have to install some new ones in there, so if you got any tips on doing that it would be great.
  6. ttopstang

    Paint and Body Guys: Are these worthless?

    Those look like the guns used to spray house paint, I used one not too long ago.
  7. ttopstang

    5 Lug Conversion rear brake lines options...

    Yea they do mount to the body. I'm going to have a come up with something to make it work. It's really not a bad fit. And the adapter at advance is part # 327850. (the guy at the local advance near me is ASE certified parts specialist and helps me out a ton). Its $1.89.
  8. ttopstang

    5 Lug Conversion rear brake lines options...

    I just picked up the soft lines from a 01' convertable. It looks like I will have to work them a little bit to get them to ride on the axle tube. If they don't work, oh well, I got them for $5 each. Are the rear calipers the same from 94-04? The part #'s are different for the...
  9. ttopstang

    Need axle diameter for rear axle bearing area

    Ive got some axles from a 2000 v6 if that will help any? they look the same, just different length.
  10. ttopstang

    Cheaper rear disc brackets...

    I didn't use any washers, the only thing I did that was posted in that link was cut the square out. Everything lined up perfect.
  11. ttopstang

    Obama Custom Tuning???

    I saw it right before it was deleted, said something like; that guy (obama) is a piece of crap, but he used different words. It really wasn't that bad.
  12. ttopstang

    5 Lug Conversion rear brake lines options...

    The rear end I got didn't come with any brake lines at all. I guess I'll have to go get the soft ones from the junk yard (or brand new ones) and then buy the pre made ones at napa.
  13. ttopstang

    5 Lug Conversion rear brake lines options...

    I know this is old, but this is where I'm stuck. I have the calipers from a 2000 v6 mounted and was wondering why the stock lines won't work? I unbolted them and they reach the calipers, but I remembered hearing that I needed new lines. If I do need new ones, Mustang5l5, do you remember...
  14. ttopstang

    Cheaper rear disc brackets...

    It's very easy, once you cut the square out of the bracket, it just slides on and the bolts fall into place. I don't plan on running the anti moan brackets so I hope they work out like your did 90lxcoupe.
  15. ttopstang

    A few new pics and updates!

    I was thinking the same thing. :D
  16. ttopstang

    haven't posted in a while. New pics of engine bay!

    That is one of the nicest stangs I've seen. More pics please!!
  17. ttopstang

    Cheaper rear disc brackets...

    The brackets look thick, but they're not that bad. I used a sawzall. On that link posted above, some guys said they used hack saws, but theres no way. I started the cut with a hack saw, then used my sawzall to finish going down. You could also use a cut off wheel, but it would of taken...
  18. ttopstang

    Cheaper rear disc brackets...

    Thanks for posting that link. I cut it like that instead of 2 pieces and it worked perfect. I would much rather use 3 bolts instead of 2.
  19. ttopstang

    Fox Tail Lights

    I've got a set of tinted lx tails that I'm trying to get rid of. 87-93 Smoked LX tail lights mustang
  20. ttopstang

    Satin black with clear coat?

    You use a satin clear.
Top Bottom
Back
Forums
Menu