Search results

  1. C

    time for tko. D&D perf. OR Hanlon motorsports?

    Hanlon was very helpful when I rebuilt my T5, and I asked a LOT of questions...:rlaugh:
  2. C

    granada brake help

    I bought mine at a local parts store
  3. C

    My two notchbacks

    I'm kinda partial to the black trim...:D
  4. C

    noise in front springs

    look under suspension. http://www.mustangsteve.com/msFAQsuspension.html
  5. C

    Don't ever sell your Fox

    I think about putting my Coupe out front a for sale sign on it occasionately... Mostly because I really don't like the AOD, gonna fix THAT real soon here. All I need are some flywheel bolts and a rear main seal and I have all the parts to swap in a CR T5 :D Already did the pedals last fall :nice:
  6. C

    noise in front springs

    Your UCA bushings are dry. Mine did the same thing, I took them apart and did the Mustang Steve mod on them to allow the grease to travel the length of the thread. They're nice and quiet now :nice:
  7. C

    Steering Wheel?!

    I have a LeCarra, beautiful wheel. Moto Lita's are supposed to be similar http://cgi.ebay.com/ebaymotors/Moto-lita-Steering-Wheel-16-Dished-Nardi-Momo_W0QQitemZ170092854956QQcategoryZ33704QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
  8. C

    Can a head gasket be re-used??

    +1 :nonono:
  9. C

    Rear Disc Conversion (What Master Cylinder?)

    I used an '86 SVO MC (on a Fox 2.3 booster) in my 66 vert. it's a steel one. It works very well and using a Versailles dist block, I didn't need a prop valve. The only thing I didn't like is the ports are on the wrong side.
  10. C

    Got a weird question!!

    My 91 doesn't have a button:D
  11. C

    Am i the only one who daily drives the fox?

    My Coupe is a DD until the snow flies.
  12. C

    I have a '92 Fox GT-Front 5 lug change with '01 cobra????

    I knew it wouldn't be that easy...:rolleyes:
  13. C

    I have a '92 Fox GT-Front 5 lug change with '01 cobra????

    Are you saying the PBR's will fit on stock Fox spindles? I have a set of the big piston ones lying around, was going to put them on my '66 vert instead of the Granada's. But if they fit a Fox...
  14. C

    For those of you who like a clean stock notch...

    Nice :nice: Looks a lot like mine, well... except much better... :rolleyes: I like the black interior in there.
  15. C

    Another FOX BODY gem on Ebay!!

    What more could you need?
  16. C

    C+L 73mm MAF Q

    Wow, you guys are GREAT!!! The .510 dia is red (30#) the .564 dia is clear (19#) The .547 dia. doesn't seem to fit the size charts referenced, but I was really just looking for the 19# :D Cool :nice:
  17. C

    C+L 73mm MAF Q

    I picked up one of these off ebay and it was supposed to come with 19, 30, and 36 sample tubes. The 2 that were loose were scribed 30 (.510 dia) and 36+38 (.547 dia.). I took the third out because the MAF was filthy and it's not marked but measures .564 dia. with no other markings. I'm guessing...
  18. C

    SENDING UNIT PROBLEMS ????

    I did that for a couple years :lol:
  19. C

    SENDING UNIT PROBLEMS ????

    You can get a new sending unit for about $90
  20. C

    Need some detailed help...

    I put some BBK equals on my '91 a couple years ago and the things I recall are rusted nuts on the H pipe flange to header connection on the stock stuff. Real tough spot to get into to cut them off too. Thanks air hammer :D DO use good gaskets, I used some copper ones. I have a set of DR...
Top Bottom
Back
Forums
Menu