Search results

  1. ozanracing

    Engine need balancing even with stock internals?

    As long as the piston and and rods are the same weight, and the crank is the same, you don't need to.
  2. ozanracing

    SCARY PLEASE READ

    I live in so cal. 10 years in OC and now 2 in SB. Just depends WHERE you live.
  3. ozanracing

    How fast have you got your v6?

    When my girlfriend had her 2001 v6 it went 120mph then hit the rev limiter. Wonder why they reduced it for the new one?
  4. ozanracing

    Punnting an end to the PROCOMP head mystery *MANY PICS*

    I don't want to buy trickflow/afr/edelbrocks, I just got these...:rolleyes: I do agree, the mid throttle response may not be as good as a smaller runner head (I can't actually comment on how they PERFORM since I haven't driven the car with them yet) But they will be fine for what I intend to...
  5. ozanracing

    Hey everyone, im new to this forum, wat do ya think of my 5.0?

    A 190lph pump is 100lph more voulme over a stock one. I call it high volume. But that's just me.
  6. ozanracing

    Hey everyone, im new to this forum, wat do ya think of my 5.0?

    Just wondering, why are you putting in a high voulme fuel pump on an otherwise stock motor??
  7. ozanracing

    Punnting an end to the PROCOMP head mystery *MANY PICS*

    That's exactly the case. I've heard lots of statments like stooges, but the fact is it's where you get them from that makes or brakes them. Pro Comp sells ONLY bare castings. They ship them to distributers, then it is up to them to assemble them, or pass them on bare. The castings BARE are...
  8. ozanracing

    progress pics of my mustang

    Noice!! I love projects....That's gonna be sweet!
  9. ozanracing

    Punnting an end to the PROCOMP head mystery *MANY PICS*

    Here is a closeup of the port allignment.... And how they look on the motor..
  10. ozanracing

    Question about cleaning pistons

    Some carb cleaner, and a nylon brush would do the trick, Just keep the cylinder walls protected while the heads are off!! Very important!! Moisture causes rust! Get some camshaft break-in lube and pour some into the cylinders then massage it into the cyl. walls with a paper towel.
  11. ozanracing

    oil pump bad, different oil pan?

    I dented my oil pan, then noticed a loss of pressure, so, being the crafty mechanic that I am, I rented an engine hoist for the day ($35) and bought a new oil pan and pickup. After pulling the manifold and attaching the hoist, and removing the engine mount bolts (24mm?) I just got under the car...
  12. ozanracing

    Punnting an end to the PROCOMP head mystery *MANY PICS*

    No, thier more suited for a stroker. Or a 302 with a BIG cam. Also there was an issue with the intakes not bolting up right, well I just mocked up mine and it was spot-on. (trick flow)
  13. ozanracing

    Punnting an end to the PROCOMP head mystery *MANY PICS*

    Aluminum, yes. 1.94" intake / 1.60" exhaust.
  14. ozanracing

    Punnting an end to the PROCOMP head mystery *MANY PICS*

    Everything lined up fine for me, I just finished checking the pushrod legnth, and need to order longer ones (6.800") Besides that, they're bolt-on...
  15. ozanracing

    Punnting an end to the PROCOMP head mystery *MANY PICS*

    $874 shipped....No flow #'s, he flow's the 210's, but not the 190's...They are supposed to flow very well, and wern't recomended on a 302, unless it's going to haved forced induction...
  16. ozanracing

    Punnting an end to the PROCOMP head mystery *MANY PICS*

    These are the 190cc versions, sent to me by Jim at tri state. I spoke to him for a while, and he had lots of good things to say. He does the machine work and assembles them. I think one of the reasons many people complain of thier lack of quality is because they buy them bare, (THEN YOU HAVE TO...
  17. ozanracing

    SCARY PLEASE READ

    Exactly. He was speeding on a 25mph street, then told the cops he had problems with his steering, then changed it to having a brake problem... I heard him coming. The whizzz of a 4cyl. spinning at high rpm getting louder and louder and right as I turned my head to look *bam* we're hit. When I...
  18. ozanracing

    SCARY PLEASE READ

    Oh please. I was sitting in my girls 2001 v6 vert and we were eating some food and talking about 12:00 at night. Some stupid unlicensed mexican 20 year old kid driving a probe rear ended us (parked) at 45mph, pushed our car 37ft (according to the police) and destroyed the poor stang. It saved us...
  19. ozanracing

    convertibles with roll cage pics, please!

    [/URL][/IMG]
  20. ozanracing

    Injector Question?

    11-18 Ohms Impedance.
View older results
Top Bottom
Back
Forums
Menu