Search results

  1. S

    Need Help, no oil pressure.

    How difficult is it to change the oil pump. Do I just need to lift up the motor and unbolt the pan? Will I have enough access to the pump to change it?
  2. S

    Need Help, no oil pressure.

    Alright I'll need to do that, the engine runs fine no noises or anything. I've started it up a few times and it starts fine idles fine etc. The oil level is also normal. I'm not to sure on what to do.
  3. S

    Need Help, no oil pressure.

    I was driving home a short while ago and when I looked at my oil pressure gauge (Autometer Ultra-Lite) it went to zero. I was only about a 1/2 mile away from my house and managed to get home. I checked the gauge and wiring to the sending unit and tickered with it a bit and still no pressure...
  4. S

    Need Help, no oil pressure.

    I was driving home a short while ago and when I looked at my oil pressure gauge (Autometer Ultra-Lite) it went to zero. I was only about a 1/2 mile away from my house and managed to get home. I checked the gauge and wiring to the sending unit and tickered with it a bit and still no pressure...
  5. S

    Cobra tail pipe question.

    how much do the mac tailpipes run? Are they chrome or polished?
  6. S

    Did your BBK headers come like this....????

    my bbk shorties came like that, and got my dremel out and grinded the excess out also. It takes awhile to do though, good luck.
  7. S

    3" or 3.5" exhaust tips? Foxbodys please post pics

    BADPONYsc, your stang looks really good. I've got a silver GT that looks exactly the same (color is exact) except I've got a GT wing and no exhaust tips. What size wheels are yours and what size tire? I've got Welds 15x8 w/265/50. Do you any problems with the tailpipes clearing the tires.
  8. S

    Pro5.0 vs Steeda Tri-Ax for a T5?

    I've got a Tri-Ax and love it. If I ever need to buy another shifter that's what it'll be.
  9. S

    How to Install Granatelli weight jackers and adjust them correctly?

    I'm having a problem installing these. After i took the stock stuff out and was trying to put the new ones in, it looks like the rearend shifter a little to one side and i can't get the new ones to line up. The passenge side arm is like 5 inches to short I adjusted them to stock length and...
  10. S

    How to Install Granatelli weight jackers and adjust them correctly?

    So its just pretty straight forward? Any other suggestions? Thanks
  11. S

    How to Install Granatelli weight jackers and adjust them correctly?

    I just purchased some weight jackers and was wondering how to adjust them right? Do you just lengthen the bearing side to fit like stock? Do you need to get new spring isolators when installing to? Any help is appreciated. Thanks Casey
  12. S

    What's the best fluid for TKO?

    Does anybody else know if the Mobile 1 can be used? Or any other fluid?
  13. S

    Are all SS Brake Lines created equal?

    I've looking into getting new SS brake lines for my car, but the partshopper is out of them at the moment. I've looked into Maximum Motorsports and Steeda, but there a little pricey for me. I've found some on ebay that are $70.00, would these work just as well? Are there any differences in...
  14. S

    Help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

    If its fuel injected it sounds to me like you forgot to plug the vacume line that goes to the MAP sensor. Check all the vacume lines and make sure there all correctly connected. That would be my best guess.
  15. S

    Lower Manifold Questions!

    Yes, definately switch everything first. It'll be alot easier and quicker to do that way. Make sure to put the oil baffle on the bottom of the new intake where the PVC goes. If not it'll blow oil up to your upper intake and it'll smoke.
  16. S

    Rear end shaking

    I think its probably the driveshaft. I had the same problem except for the buzzing, so I went and bought an aluminum ds and it cured all my problems. Very pleased with the driveshaft well worth the price and you get the piece of mind of the stonger and lighter aluminum driveshaft.
  17. S

    Rear end shaking

    I think its probably the driveshaft. I have the same problem except for the buzzing, so I went and bought an aluminum ds and cured all problems. Very pleased with the driveshaft well worth the price and get the piece of mind on the stonger aluminum.
  18. S

    Rear end shaking

    I think its probably the driveshaft. I have the same problem except for the buzzing, so I went and bought an aluminum ds and cured all problems. Very worth pleased with the driveshaft.
  19. S

    car missing out bad under load @4000 rpm

    Get the codes pulled and that should tell you if you have anything amiss. You can take the TFI module to autozone and they can check it for you. And if its bad go the ford dealer and get one from them, the autoparts store brands are cheap and don't last.
  20. S

    new mods need help

    I like everything you mentioned except the b-cam. You should go with a custom, and if money is a concern you could go with the split duration Trickflow stage 1 or maybe 2. And a bigger mass air meter is a must with a combo like that I'd with with atleast a 73mm C&L there pretty cheap on ebay.
Top Bottom
Back
Forums
Menu