Search results

  1. Scott W

    255 fuel pump noisey??

    Ya a little bit louder is normal. It is a much more powerful pump, so you will hear a little more noise from the pump. If there's alot more noise than something might be wrong with the pump itself- but its probably fine.
  2. Scott W

    car wanting to overheat

    Is the upper rad hose hot? If so the water pump wouldn't be the problem. You had this problem before doing the work correct? Did you make sure the fan is spinning? Also make sure the rad isn't super dirty. If theres alot of junk up front then airflow might not be getting through the rad...
  3. Scott W

    car wanting to overheat

    I did a quick search online and found a couple things. Its possible it might be your rad cap - if its old just replace it. My rad cap wouldn't seal properly so I bought one that has an extra red lever on it which helps it seal. the fan, as i mentioned earlier. the clutch may not be...
  4. Scott W

    car wanting to overheat

    make sure the fan is working. Other than that you've pretty much checked everything. Maybe the water pump is going bad - although you should notice a leak in the pump if thats the problem.
  5. Scott W

    Need Black Kick panels, arm rests

    did you use anything special to clean them with? any scuffing? how are the rear quarter panels holding up? Some of the panelling on my car looks great, other places not so great. Has anyone tried adhesion promoter before painting?
  6. Scott W

    FOTM nominations June 08

    damn
  7. Scott W

    Picture request please.

    I went with black carpet and black and blue seats. Black, or grey carpet is probably the best and classiest. Colored carpet can really make things look junky. I couldn't find black headliner material, so I went with dark blue.
  8. Scott W

    Need Black Kick panels, arm rests

    I'm looking for some black interior pieces, inclucing black kick panels and black arm rests. I'm sick of painting them. I've tried every paint, primer, prep possible and still the paints just don't hold to some of the plastics in the car. Other plastic inclucing the center console came out...
  9. Scott W

    The thread of the nicest FOXES!

    and a couple more
  10. Scott W

    The thread of the nicest FOXES!

    here's my 89 lx
  11. Scott W

    How to replace door roller bushing?

    For anyone interested, after removing the pins the roller is simply hammered out and the new one hammered in. here's a link with pictures on how to do the entire door pin process, including the roller (complete with pics)...
  12. Scott W

    How to replace door roller bushing?

    anyone?
  13. Scott W

    How to replace door roller bushing?

    I've read a million posts on how to replace the door pins and bushings, but does anyone know how to replace the roller bushing? thanks in advance.
  14. Scott W

    calipers (left and right?)

    stupid question guys, pardon my ignorance but I removed both caliper to replace them and now I'm not quite sure which is left and which is right. they both will fit on, I'm imagining the bleeder points straight up? thanks again the rebuilt calipers have ford part number 355L and 406R...
  15. Scott W

    Line lock question

    Yeah, I also put a button in series (on the nitrous), so that even if I hit the nos button nothing happens unless the switch is also turned on.
  16. Scott W

    Caliper Bolt size ? T-50?

    thanks- good idea.
  17. Scott W

    Line lock question

    Yeah, you have to be careful with that. if you accidentally hit the button you could lock your brakes, either on or off. what I mean is that if you are NOT applying your brakes and hit the button then the brakes will not work for that moment that the switch is hit (the linelock activated...
  18. Scott W

    Caliper Bolt size ? T-50?

    Can anyone tell me what size the caliper bolts are. Are they T-50 torx. thanks.
  19. Scott W

    MAC H-PIPE - no hangers???

    I'll see how everything fits and if I have to, i'll weld up a hanger from my old h-pipe. thanks again guys.
  20. Scott W

    MAC H-PIPE - no hangers???

    5spgt - I've actually been running without cats for years now, but it's getting too costly to keep doing the runaround for emissions. testing used to be every 2 years, and I didn't mind spending a little extra to get it to pass, but now they are switching to every year and it's just not worth...
Top Bottom
Back
Forums
Menu