Search results

  1. 9

    What to do with EFI 302?

    Not worth the trouble and money involved. 94-95 gt can be found cheap if you want to work on it that much. The reason I say that is because the motor you want to put into the car will need work to be even on par with a stock mustang 5.0.. someone correct me if im wrong.
  2. 9

    96-98 tails

    Thanks!
  3. 9

    96-98 tails

    I have the the tail light wiring ie the bulbs to the connector. it is about 6-8 inches long. is that what you are talking about?
  4. 9

    96-98 tails

    Anyone have a write up on the wiring change needed? I searched and only found this. I know everyone hates this change but I want sequential signals.
  5. 9

    Tire side wall

    Thanks
  6. 9

    Tire side wall

    I am trying to match a 275/40/18.. to the front tire.. should I get a 255/40/18?? or a 255/45/18?
  7. 9

    Mach 1 Raced a 2010 wrx with my 94 mach 1...

    "I need two, the big ones"
  8. 9

    Rear diff fluid change

    I have a 95 gt. Would I use the same oil? does the older diff take a friction modifier also?
  9. 9

    CEL and pinging

    has a new HB and will check timing on my next days off. Keep up the suggestions.
  10. 9

    CEL and pinging

    couple issues. see if you can point me in the right direction I get a CEL when 1/2 throttle or push past 3k rpms. also have random pinging but do not always get a CEL at the same time. car has always pinged but has gotten worse. It does not always throw thow the CEL The pinging is sudden...
  11. 9

    HD Video of 2011 5.0 into the 11 seconds 1/4 mile!

    nice to see it pull a wheel off the ground
  12. 9

    Barricade push bar

    you are going to have every cop in the area pulling you over. CHP look-alike car owner arrested in Red Bluff - Red Bluff Daily News Online dont carry a billy club if you live in cali.. and also cops will look for a reason to tag you
  13. 9

    anyone have pics of y2k wheels on their sn95???

    red car not mine needs spacers in the rear imo
  14. 9

    Cobra seats front and back for 375$...should I buy them?

    there is a big difference between part house seats and cobra seats
  15. 9

    94 cobra temps

    Go buy a mechanical temp gauge. Then see where the car is really at temp wise.
  16. 9

    engine stand

    thanks
  17. 9

    engine stand

    What size bolts to hang a 302 off a stand? thread type etc etc
  18. 9

    Protection while trailering your car

    be careful with wrapping as anything loose can scuff as it whips around
  19. 9

    Side Exhuast Muffler Shootout

    here are tips that appear to fit the abc sides better if you are willing to shell out what they want for them Mustang Side Exhaust Kit
  20. 9

    question for Turbogt

    thanks, I should have posted that I found his thread about getting it done.
Top Bottom
Back
Forums
Menu