Search results

  1. BrightBlue00GT

    I just got my 295/35/18's from fedex, HOLY GOD

    Yea, I do for the 295's. With a 9" I MIGHT go 285, but probably would stick with 275's. Thanks
  2. BrightBlue00GT

    I just got my 295/35/18's from fedex, HOLY GOD

    I would not go 295's on a 9". Here are my 295/35/18's on 18x9.5" Cobra R's. I wouldn't say they are bulging, but I wouldn't go any bigger on a 9.5 either. And I sure wouldn't put them on a 9".
  3. BrightBlue00GT

    KB owners in here please

    BC, Dan, shoot me a copy of that new priming pdf so I can add it to my documents would ya? Thanks
  4. BrightBlue00GT

    KB owners in here please

    Mine did the same thing on and off for several months. It is a PITA to get it primed right because of the trapped air. That pump makes a wicked noise when it's running dry. Stop immediately when it happens. You can get some instant relief if you're on the road by cracking the res plug a...
  5. BrightBlue00GT

    Kenne Bell 9psi Ic On Order!!!!!!!

    Yea, it's the chip from KB. When I ordered my kit they didn't have my pcm catch code on file, so I had to send them the pcm to download it. They burned and installed the chip for me and sent the whole thing back. Doubt if that has anything to do with anything, but it is one difference in the...
  6. BrightBlue00GT

    Kenne Bell 9psi Ic On Order!!!!!!!

    No the KB is not the only mod. I have a complete list in My Mods Database below, but in a nutshell I've added: - 90mm Lightening MAF - 75mm FRP TB - KB CAI - KB TB/MAF Big Tube - KB Boost-Spark - Denso IT20 plugs - ProChamber - Steeda/Borla Catback - FRPP 3.73's I didn't go to the...
  7. BrightBlue00GT

    Kenne Bell 9psi Ic On Order!!!!!!!

    Where are you here in Korea? I assume USAF? Osan, Kunsan? 607th in Yongsan? My office is in Yongsan, but I live down near Osan (retired USAF). Playground60 - I updated my sig about 2 months ago with my numbers from the dyno in Seoul and the run down the quarter in Yongin.
  8. BrightBlue00GT

    Kenne Bell 9psi Ic On Order!!!!!!!

    Dan, it took me about 3 days to actually complete the blower, but I was actually at it longer due to the other parts I was putting on, and waiting for the pcm to come back. Since I had to ship my pcm back, I had time, so I took it, and put on the valve covers and tinkered here and there...
  9. BrightBlue00GT

    Kenne Bell 9psi Ic On Order!!!!!!!

    Congrats Dan! I agree with you on the KB support... top notch in my book also. Great service, gread product and great discount policy. They didn't make me send a scan of my ID though, maybe too many scammers out there taking advantage. Get home safe.
  10. BrightBlue00GT

    Well, I did it... went thru another set of tires

    The numbers are in standard measurements except the temp, it's the langauge that's in Hangul, so most can't read it: 443rwhp, 459 torque @ 6100rpm. I'll scan what I have and post it, although I have been hesitant to do so cuz we're going to hear the same things as always; is it SAE? Is it a...
  11. BrightBlue00GT

    Well, I did it... went thru another set of tires

    I can't believe I put 36K on my Michelins already or that I've burned thru them so fast. It's not MY fault though! It's Kenne Bell's fault. I HAD NOTHING TO DO WITH IT! My brain says NO, but my foot says YES, which is controlled by the KB demon. While I did like the Pilot Sports, I went...
  12. BrightBlue00GT

    Headlight Wire Harness Melting... what should I do?

    I know I know... but the blower's working great :D Scotty, where did you get yours? Can you throw a mail order site my way? Sounds liek I need to go the same route. Ever here from moose?
  13. BrightBlue00GT

    Headlight Wire Harness Melting... what should I do?

    Thought the passenger side headlight was burned out. Went to replace it only to find the bulb was fine, but the Wire Harness Connector Plug was melting where it plugs into the bulb. :mad: I know some of you have changed wire harnesses that handles more juice, most I think were for fog...
  14. BrightBlue00GT

    KB Dyno #s

    Don't get me wrong, I don't know if mix matching has anything to do with it. I just know I didn't have any problems and I did use the KB provided parts... it could just be luck one way or the other. Hard to say. I have the switch-chip, although I have it taped down (for safety sake) in the...
  15. BrightBlue00GT

    KB Dyno #s

    368 rwhp @5300 rpm sounds about right, although I don’t know how it got to 135mph. Get a Speed Cal on that thing. I definately think the low HP is due to the rev limiter problem you're seeing, not the motor itself. Kenne Bell chip does not modify the rev limiter. It also does not modify...
  16. BrightBlue00GT

    Mach1 chin spoiler install

    Pictures are worth a thousand words. Did it by myself, drilled holes and used zip screws, mounted if flush with the back fender edges.
  17. BrightBlue00GT

    ATI vs. KB

    The intercooler itself? It is under the intake, so no, there is nothing to relocate, and no I didn't relocate the battery for anything. The IC radiator is in front as most are. Click on Photo Gallery on my website listed below and here http://www.pats-world.com/brightblue00gt/ and you'll...
  18. BrightBlue00GT

    ATI vs. KB

    You've heard it before from me... KB all the way! Yes it's expensive, but you get a new cast intake along with the entire kit start to finish, AND an awesome power adder. Twin Screw is the way to go.
  19. BrightBlue00GT

    Tuned KB - New #'s!!!

    Great numbers dig-it! People ask me all the time what, if anything, do I miss not being in the states... this is it. Running down to a dyno on a weekend. Good job.
  20. BrightBlue00GT

    Finally....KB dyno numbers

    Nice Numbers! As soon as I am done with this business trip (TDY) I'm going to the place I recently found in Seoul to get dyno'd. Did you leave your Steeda T/A on after the KB chip install? I took mine off cuz the chip is tuned for timing with the JB.
Top Bottom
Back
Forums
Menu