Search results

  1. S

    4.10 not worth it!!!

    Look at the data. Gears- 3.27 4.10 330(ft) 6.21(s) 6.22 1000 12.27 12.25 1320 14.62 14.56 The car with 3.27s would get slightly ahead in the first 330ft. By the 1000 ft mark the car with 4.10s would have caught up...
  2. S

    4.10 not worth it!!!

    It's physics and math and all that simulator is, is a big calculator. Its very accuarate infact some can do what I did on paper. Plus taking it to the track is expensive, im not going to waste $700 to find out. This simulator can tell me what I want to know before I try it. No waste of money. I...
  3. S

    4.10 not worth it!!!

    In my statement I claimed gears are only effective with tires. On a strip car it makes sense because you got some sticky rubber on ya. Street tires will slow you down. If you took 10 hp away from the Mustang and had the horsepower peak at 6500 rpms instead of 5250 and then had 4.10s it would...
  4. S

    4.10 not worth it!!!

    !!!Revised Simulator Runs of 3.27 vs 4.10s!!! Read all information please. Now I can't simulate every driving condition out there for you. We all drive on roads which are comprized of Asphault or concrete and dragstrips with different levels of traction compound. So I have to simulate data...
  5. S

    squeaking coming from front end

    Very Very commons, Mine didnt do it till ford worked on the diverside A-arm, spindal and Tie rods. Now any time the suspension flexs alot it squeeks.
  6. S

    WELL, FRONT END CREAKING ISNT BALL JOINTS OR TIE RODS!!

    My car makes creaking/popping noise from my front end when backing up and going over bumbs. When I first got the car it made a creakin nosie so ford replaced the O-rings in powersteering rack. It made the nosie lessen for a bit. I then parked my car in a walgreens and a truck backed into the...
  7. S

    4.10 GEARS

    Today I went to my local ford dealer and asked a pricing on 4.10 gears and installation. There quota was: $350 for installation $240 for the gears $119 for the install kit I didnt even know I needed an install kit. I feel that the price for install is far being its done at a ford shop...
  8. S

    straight shot idea!

    I guess the air really couldn't heat up that much and even if it did it's not enough to take power away. If anything it will help a little with the mixing of the fuel and air. I guess it really doesn’t do anything but give you a little better sound. Cold air intakes don’t increase mean effective...
  9. S

    straight shot idea!

    So were can I find some good insulation? I read a post about how some guy used air duct insuation on his porshe and did it for under $10.
  10. S

    straight shot idea!

    I noticed that everyone has been talking about the new straight shot CAI. Everyone thinks its won't produce any power mainly because the tube heats up and the incoming cold air just isn't cold any more. So I was thinking well what if you wrapped the tube with insulation. I don't know what it's...
  11. S

    O2 BS and RPMOUTLET

    Ok if you have read my pervious two post on oil change disaster and sounds this is just an update. So i got my Exhaust leak on the passengerside manifold to my prochamber fix by add a bolt because one fell off. So i reset the ECU and it the light keep coming up. I thing it was 0136 or something...
  12. S

    Second Times a charm

    Ok 4 months ago I races a S-ER 2.0 Turbo that was running 13.5's and he ate me up. So I raced him to night an I lost but my launch was so horrable that i spun threw 1 and 2ed. I told the guy that it was my new car and i didnt want to beat it and I havent launched it to much. So we exchange...
  13. S

    03 differences

    I heard that the springs in the 03 got upraded. I think it was 400lbs front in 02 to 450lbs in 03 and 200lbs rear in 02 to 210lbs. Im not 100 positive on the change but I positive on it being 450 front by 210 rear.
  14. S

    Sound sounds and sounds

    Ok if you read my recent post titled oil change disaster I explained how i had changed my oil and got a check engine light. Today Autozone pulled the code and it was my passenger side 02 senor so im going to have to call rpmoutlet and see if they will replace my month old MILS. Well this is were...
  15. S

    Oil change disaster

    Ok so tomarrow im going to get the code checked and ill post it. I heard that FRAM is suposed to be best filters. They last longer and filter to a smaller degree. Also is it dangerous for me to be driving around with the computer having an error cause if the computer reads a low exhaust gas temp...
  16. S

    Oil change disaster

    So this morning I get up and change my oil to 6quarts with a fram filter. Drove it for about 10 miles then the service engine light came on. So i pulled over checked my oil and everthing looked fine. I got home and disconnect my battery and it work but after 5 mile the light came back on. Now...
  17. S

    Filling the 4.6L cylinders with air...how would you do it?

    My guess would be to take it down to BDC on the intake stoke then Get it up to BTC so that there is alittle compression to hold the valve up. I would think that resting the valve on the top of the piston would be a lot easyer and more realistic than trying to use pressure. Good luck
  18. S

    DriveShaft Loop

    Ive desided that before I add any more power to my GT I need to get some Gear. Ive Desided that Ford Racing 4.10 are what I need to make my stock engine fast. My question is do i need a Driveshaft Loop for 4.10s also Ive heard that a modifidy Cross-shaft is required, is that so?
  19. S

    What is modular?

    I think it was the 429 or was is 428 were sohc. The Cammer motor was sohc.
  20. S

    X-pipe Nightmare

    What got me the most pissed off was that we hit it with the impact wrenchs and it still didnt work. We were going to get a 3/8 reducer but i gave up. Maybe the 3/8 reducer is what i need with a bigger impact wrench at 200psi.
Top Bottom
Back
Forums
Menu