Search results

  1. 93GreenLX

    some one stole my ****ing trash can!!!

    Yeah anyone who is caught charaing trash is definitely a moron in my book :hail2: :banana:
  2. 93GreenLX

    Any Advantage to Swapping Cams?

    I plan (at this point unless informed otherwise) to port it to match a fel-pro gasket on both intake and exhaust side and blend/taper it down about an inch to an inch and a half. Is this the best approach or could I go further. Remeber I am building this as a daily driver to last me another...
  3. 93GreenLX

    Any Advantage to Swapping Cams?

    I swear I just replied but it's not showing up(past my bedtime) Will a corded dremel with the flex shaft be sufficient? (Wonders aloud if they make a porting kit) I am new to engine building(obviously) and just wanna do it right but also learn, hands on, at the same time.
  4. 93GreenLX

    Any Advantage to Swapping Cams?

    So any headwork is pointless, except milling? Getting it on Thursday :cheers: Hmmmmmmmm Didn't know this and can't find any information on it anywhere...... I've got a Pacesetter longtube :nice: No cat and a Flowmaster Delta 40 series 2 chamber. 2 1/2" all the way back I found a shop...
  5. 93GreenLX

    Any Advantage to Swapping Cams?

    I can get the Ford Motorsport version at cost from ford. Anything else to go along with it, that I should get?
  6. 93GreenLX

    Any Advantage to Swapping Cams?

    What about a full port for the head then....I thing I don't wan't however is to lose tooooooo much low end torque as it is bad enough already. 84 RWHP BABY!!!!!!!!!
  7. 93GreenLX

    Delta Flow vs. Original Flow

    Delta sound a little less ricey and MUCH nicer at idle
  8. 93GreenLX

    I cracked the 13s

    Congrats!!!!!!!!!!!
  9. 93GreenLX

    Any Advantage to Swapping Cams?

    http://racerwalsh.zoovy.com/product/RWA1431R Am I correct in assuming this is the one you refer to above. I was dyno'd @ 84 RWHP several months ago before my compression dropped to 91 in Cyl #1 and 120-130 in #2,3,& 4. Did you ever determine the best intake for 91-93 DP setup?
  10. 93GreenLX

    Any Advantage to Swapping Cams?

    Wow, your site and post we're very infomative, nice to see others who love a nice N/A motor. Between you, Bhuff30 and all the others I'm sure I'll get all my questions answered. :hail2: :hail2:
  11. 93GreenLX

    best muffler for a non ricer sound

    I've got a pacesetter longtube header, no cats and a 40 series 2 chamber delta flowmaster and at idle it sounds like a 5.0, Up to about 1600RPMS it sounds like a 5.0 and then the higher you get it the more it reveals its true self. We had a club meeting down here in southern Maryland and there...
  12. 93GreenLX

    some one stole my ****ing trash can!!!

    Wuuuuuuuuuhhhhhaaaaaaaaaaaaahaaaaaaaaaaaaaaaaa
  13. 93GreenLX

    New Mustang Site - Check it Out!!!

    I like it, very easy UI, but looks good
  14. 93GreenLX

    Any Advantage to Swapping Cams?

    Anyone?
  15. 93GreenLX

    Going to a Mustang JY next week.....

    Going to a Mustang JY next week, is anyone looknig for anything in particular? I am picking up a wheel, new sunroof, some weatherstripping, sway bars and an engine
  16. 93GreenLX

    Any Advantage to Swapping Cams?

    Regardless of what I mill(.020 max I'm thinking) I am going to port match the intake. Will the computer relearn fine with all that extra (woohoo) air?
  17. 93GreenLX

    Any Advantage to Swapping Cams?

    What effects does milling the head to a 10:1 compression on a daily driver? How do you determine the compression ratio? Also any walkthroughs on ther on port matching the intake manifold? My impression is that the intake manifold does not need to be ported itself besides the port/gasket...
  18. 93GreenLX

    Any Advantage to Swapping Cams?

    I'm rebuilding an N/A motor for my 93 2.3, so I've already got the roller cam. Would there be any advantage to swapping in a mild street cam? Any specific recommendations? I've got a connection that can get me one for about half the price listed on Racer Walsh. I will be gasket matching the...
  19. 93GreenLX

    I really need you guys help on this one

    Was it Now?
  20. 93GreenLX

    93 Mustang LX 2.3L

    Stinger OWWWWWWWWWWWWWWWWWWWWNZ JOOOOOOOOOOOO
Top Bottom
Back
Forums
Menu