Search results

  1. hotrodnut

    Driveshaft.....Aluminum or Steel?

    Why were you cautioned? I've had no problem with mine. :shrug: The Mustang seems to have less vibrations and rev up a little quicker since I've changed from the steel to aluminum. :nice:
  2. hotrodnut

    How do YOU jack up the rear end of you Mustang?

    The biggest reason Ford says not to jack up the Mustang with the differential is because the axle tubes are just pressed into the center housing section. Continued jacking can and sometimes will make these tubes shift within their counterbored seats. This causes unwanted Camber to be put into...
  3. hotrodnut

    New S197 V6 Strut Tower Brace from BMR

    That's some very nice products. I saw them at the FFW at Speedworld in '05 and was amazed at the quality of their stuff and how quickly they had products for the S197 Mustang! :nice: From the looks of it they have stepped up to even more products too.
  4. hotrodnut

    HELP!!! Got a clunk in the rear

    It's possible that the bushings in your control arms are shot. How many miles are on the Car? My Son's '04 disintegrated the upper control arm bushings, there wasn't anything left but the steel sleeves! :shock: One guy here had similar noises as you and finally found that his upper control...
  5. hotrodnut

    Magnaflow Duals Install Update

    Looks good! :nice: Lost low end is normal when back pressure is reduced but like mentioned, upper end is improved. But I think with a tune from one of the SCT specialists could get most of it back. Justin at VMP, the guys at MPH or one of the many tuners around the counrty could probably...
  6. hotrodnut

    Noisy tranny in brand new car, please help!

    I've noticed mine makes some noise too with the clutch out which seems to be residing as more miles are accumulated, up to 600 miles now. I just think in my case it is normal but not sure about yours without comparing it to mine.
  7. hotrodnut

    New 07

    Looks good, I've got my stock Mach1 wheels that I put on the other day but the 245/45-17's are too short and didn't look right to me, but those 18's are right! :nice: I've got a buddy who traded his '05 WBlue for an '06 Black one too, he says except for keeping it clean, he couldn't be...
  8. hotrodnut

    tuner, and cai

    I hope it's ok to post this link from another site, but look at what Justin got from similar mods you want and his Dynotune: http://www.v6power.net/vb/showthread.php?t=25551
  9. hotrodnut

    What months should I avoid?

    Congrats!! :nice: :nice: Now, it's time to enjoy . . . . :flag:
  10. hotrodnut

    New 07

    Yea, I liked the Legend Lime too, it was a toss up for me. I'll bet yours looks good with the Polished 18's!
  11. hotrodnut

    tuner, and cai

    Looks nice! :hail2:
  12. hotrodnut

    difficult shifting

    Mine's the same way, it is loosening up more and more as I'm putting some miles on it, but I'll bet the best cure is going to be an aftermarket shifter. :nice:
  13. hotrodnut

    What months should I avoid?

    True, but you will know the day it came off the assembly line completed and brought to life. :flag:
  14. hotrodnut

    Stainless Works - X or H Pipe Poll

    I prefer an H-pipe sound myself, even though I have an X on my Mustang (I couldn't beat the price, FREE) I want an H. I am even considering removing the X and putting the stock H back on until I can afford to get the MRT H-pipe. Another H-pipe on the market would be nice! :nice:
  15. hotrodnut

    BBK OFF-ROAD X-PIPE NEED TUNE?

    Your're close, it was 11.7-11.9 accross the range before the tune. Kinda fat if you ask me, and will waste some fuel too . . . but keeping the foot out is best, although easier said than done. :D 03mustangGT09, I don't see where you mention a turner being added to your car, most tuners come...
  16. hotrodnut

    BBK OFF-ROAD X-PIPE NEED TUNE?

    We did similar mods with my Son's '04 Gt and had a dynotune done. Without a tuner in stock trim it was running rich, he was able to pick up near 10hp in the middle from the dynotune using the SCT tuner as well as making the A/F ratio right on.
  17. hotrodnut

    Build date, what number is your car??

    I beleive the 10/27/04 date is the date the VIN # is assigned, not the date it is built, check an Oasis report on your vehicle and it will have a different date than that one as the build date. :nice: Also the big numbers on the upper right of my '07 is 223614, I find it hard to beleive that...
  18. hotrodnut

    What months should I avoid?

    I don't know about months, but agree with the Monday/Friday days. But, what about a Saturday?? That is the day mine was built on! :shock:
  19. hotrodnut

    Build date, what number is your car??

    I know I'm bringing this older thread back, but, I wanted to let ya'll know if you get an "Oasis" Report from your Dealer's Service Department it will have the exact build Day on it, example mine was built 08/05/06 according to the Oasis Report.
  20. hotrodnut

    New 07

    Thanks for all the reply's everyone! stanmckinney, those spinners are the only option on the Mustang, it's hard to beleive that wheels as good looking as they are came as Standard Equipment but I think the spinners add a little more to them too. bigcat, I didn't trade the Mach1, I traded...
Top Bottom
Back
Forums
Menu