Search results

  1. J

    Hey Look At This

    What Is The Little 90 Degree Valve Thingy????i Have Those Vacuum Lines Going Right To The Vacuum Ball..also There Is Something Else Under The Fender...any Pictures Of The Inside Of The Fender...
  2. J

    ***Need help removing pas. side fender ASAP***

    pic post a picture of the vacuum ball and everything under the fendor..thanks
  3. J

    I Need A Weird Part For My Stang!!!

    Mavrick You There?????? Any One Got This Part And They Wanna Sell...mavrick Said He Had It And I Think He Died(not Really)lol..does Not Respond..thanks Scott
  4. J

    magna flow pipes quick

    Will magnaflow 2 1/2in flow tubes fit together with a stock h pipe
  5. J

    ****ty Idle

    i have a 1992 mustang gt..after cleaning the iac...maf..new plugs..cap, rotor.. pcv valve and filter element...also cleaned egr valve and oil change...after start up the car stumbles and wants to die and right before it does it kicks up and idles fine..what causes this..bad iac??..bad maf?? need...
  6. J

    How do I fix bent front seats?

    you have to take out the actual seat back frame and re-weld the seat back...the two pieces seprate and create the mustang "gansta lean"...also a little hammering to square up the back is good..easy fix if you can weld
  7. J

    I Need A Weird Part For My Stang!!!

    I Need The Mass Air Flow Sensor Bracket For An Aftermarket Air Intake...like Bbk, Mac..etc...i Am Just Too Lazy To Take A Piece Of Aluminum And Make One...anyone Have One They Want To Sell Or Know Where I Can Get One???....look At Picture To See What Iam Talking About...thanks
  8. J

    The Mother Of All Tps Threads

    well today i cleaned the egr valve and put a new gasket on the egr...it was pretty dirty...put it back together and started her up...not really a difference...set the tps voltage to .88 and disconnected the battery and left the door open for about a half hour...i didnt take off the tps and make...
  9. J

    The Mother Of All Tps Threads

    By tuning the tps voltage i hear it gives more thtottle response and feels like more torque...what about a hanging idle??when i rev it..it take about 1-2 second after it has droped out...to drop down to idle speed....??????????
  10. J

    The Mother Of All Tps Threads

    what is all this talk about setting the tps volatge to .98 or .99 after searching stangnet.com...i have read that setting the tps dosent matter..cuz the computer resets it after startup...that setting it to that level causes the car to run rich an mess up other components..also i have read that...
  11. J

    Tps Voltage

    should i set the tps voltage when engine is cold or warm??
  12. J

    Tps Voltage

    so what is all this about....i got a ****ty idle and my tps voltage is .72..should i change it???
  13. J

    Tps Voltage

    i actually just went out and did it acording to the acticle...red wire from meter to green on tps...and black to battery...on 20 volts...with car on acc...and got .72 volts...so it is off and cant hurt to correct the problem...right?? :shrug:
  14. J

    Tps Voltage

    nope...i got a ****ty idle...i cleaned the iac and throttle body with cleaner and it wants to stall out now...but the idle was never smooth..what else should i do to smooth out my idle...what about egr
  15. J

    Tps Voltage

    what am i actually doing by moving the tps sensor....and make it read .98...why is mine so low... .64... will i notice a difference in my idle???
  16. J

    quick help

    i just took a coat hanger..undid it and made a little hook so i could catch it under the tabs of the filter casing..thanks
  17. J

    Tps Voltage

    and i do that by..just backing off the screws on top of the tps...and rotating it till it reads about .98 and then pull the terminals off the battery to reset the computer????? RIGHT OR WRONG
  18. J

    Tps Voltage

    My Car Has Been Idling Kinda ****ty..i Have Replaced The Cap, Rotor, Plugs, Pcv Valve/screen/gromet, Cleaned The Iac...but Did Not Replace The Wires Cuz They Were Pretty New....i Put A Pin In The Green And Black Tps Wires When The Car Was On The On Position...it Read .64 Dc Volts...what Should...
  19. J

    quick help

    i bought a new pcv valve for my 1992 gt...i took out the pcv valve itself and the rubber gromet...it was all ****ty and eaten up...but whats the tip on getting the filter out thats way down there...was it suppose to come out with the grommet
  20. J

    Mystery Oil Leak....help

    i dunno what does that prove...should there be tranny fluid in there
Top Bottom
Back
Forums
Menu