Search results

  1. dodgestang

    17x9 wheels on 68

    Ohh hell you got me on a low reading comprehension day. I can not definitively say they fit the front, only the rear :nonono:
  2. dodgestang

    17x9 wheels on 68

    Having a bad reading day on my end.
  3. dodgestang

    Vote for my front tires...

    What are you running in the rear?
  4. dodgestang

    Shelby drop, tire size q's.

    Keep the gears and speed up the install of the AOD. I have 4.11 with my AOD in my 65.
  5. dodgestang

    Shelby drop, tire size q's.

    The wheel will require spacers to clear the upper a arm in the front. You want the total backspacing for a 16x8 not to exceed 4.5 inch otherwise you will contact the a arm. 26 inch is the magic number and what you should shoot for in outer diameter. After you do the drop make sure you get it...
  6. dodgestang

    AOD guys, lockup or non-lockup converter

    Its like Dejavu all over again
  7. dodgestang

    cleveland heads

    As long the are they are both 2v and the combustion chambers are the same size.
  8. dodgestang

    notching shock towers (dennis112 accufab question for you too)

    Wow....looks at all the space. You could park a CRX in there.
  9. dodgestang

    Gas Cap

    71-73 pop open bolts onto the 65...so I'm not sure what your problem is finding one. (sorry these are best pics I have of it on my car) I had this cap...I took it off. Sell it to you cheap ;) After 3 months the fake black rivets started showing rust dis-colorization...and I park in a...
  10. dodgestang

    May have to sue my engine builder

    My God man...drilling holes in his head isn't the answer. hehe...needed a star trek joke just BECAUSE.
  11. dodgestang

    Slotted Mag fitment questions - Come on in Dodgestang

    It depends on the backspacing on the 7 inch rim.
  12. dodgestang

    Slotted Mag fitment questions - Come on in Dodgestang

    You are 1.5 in short on the backspacing so they will not work for you IMO. If you owned a 67 I would say put in a 65 rear if you really wanted them. But since you own a 65....you don't have many options other than narrowing the rear.
  13. dodgestang

    How would you set up a old car??

    Define traction. Straight line or turning?
  14. dodgestang

    Rear end question?

    Did the tires spin in the same direction? Then use you have limited slip diff of some sort Did the tires spin in opposite directions? Then no you do not have a limited slip of any sort
  15. dodgestang

    How do I hook up 600hp?

    FWIW I run 620s in my 65 mustang and it idles down the track at a somewhat respectable time.
  16. dodgestang

    How do I hook up 600hp?

    As stated previously...to run 10s you need a cage. You run faster than an 11.5 you need a 6 point bar. Putting in a 4 point bar is a wasted effort because of this. I pull 1.7 60' using 17 BFG inch drag radials and there are plenty of fast cars out there pulling faster 60s with them. If you...
  17. dodgestang

    How do I hook up 600hp?

    You will need a full cage. If you want to use it as a street car then IMO you should run an aggressive road course style suspension to help keep you on the road when you are driving. Nothing worse than having your suspension unload on you when you are taking an exit ramp fast with a big motor...
  18. dodgestang

    How do I hook up 600hp?

    Well...how fast do you want to go and is this a track only car?
  19. dodgestang

    ride height problem

    All springs are not the same even if they are advertised as such. Drive it around for a few weeks to make sure it is all settled in (like you didn't torque the lower arm when the car was still on jack stands), check to make sure one doesn't have the shelby drop on the a arms, make sure you...
  20. dodgestang

    leaf springs

    The front bushing has rusted to the bolt. Tungsteen Steel Sawzal blades usually takes 2 per side and about 5 minutes to cut it out.
Top Bottom
Back
Forums
Menu