Search results

  1. DemonGT

    MS First start

    I will definitely check that out. I just thought it was odd that the AFR was set to 14.7 in the cells it was idling but my afr would not change unless i adjusted the fuel ve table down. I figured the afr table was used for the autotune portion but was unsure how the afr was maintained during...
  2. DemonGT

    MS First start

    If i set the AFR in the idle cells it does not seem to change the AFR unless i change the same cells in the fuel ve? Im not understanding what is being looked at to get to the target AFR? If i have to manually change the fuel to get to my desired AFR what is the AFR table doing?
  3. DemonGT

    MS First start

    Went back and reread my instruction from Stinger and made some changes. Did a little tuning tonight. Had a surging idle and was running rich. I adjusted the AFR table in the idle area leaner and turned the fuel in the fuel VE down and it smoothed right out. The fuel cells in the idle area were...
  4. DemonGT

    Tremec TKX 5-spd

    I have a TKO, but its the older version before there was a 500/600. It was either 3550 or TKO...what is the difference between the older TKO and the newer 500/600 ones? I bought mine back around 03 and cant remember spit about it. lol
  5. DemonGT

    Engine Finding TDC?

    I have a adjustable pointer that i am unsure if its pointing where it should so thought id make sure it was pointing right. Just wanted verification that i did the process correct. Turned motor over until on compression stroke of #1 installed piston stop Turned until piston touched stop, made...
  6. DemonGT

    MS First start

    Another thing i noticed is i have a 180 thermostat and in TS it was reading 173 when up to temp? Does the sensor need to be calibrated or is it normal for it to read a bit off?
  7. DemonGT

    Steel1 Pimpxs

    Any updates?
  8. DemonGT

    MS First start

    If you could tell me so i could try on my own that would be great. I really wanna learn and i feel doing it myself will help. Where do i find the IGN offset? Cam duration @ .050 intake 240 exhaust 246 the VE tables should only go to 100 instead of 300?
  9. DemonGT

    MS First start

    No boost, staying N/A about 10.5 to 1 Running Victor Jr heads running 91 pump gas Cam is a custom cam, i can get any specs you need just dont know them off the top of my head. I gave the duration info to Stinger when i ordered the Pimp so not sure if that matters with the base tune sent if its...
  10. DemonGT

    MS First start

    Forgot to attack the tune.
  11. DemonGT

    MS First start

    Finished up my Pimpxs install and got the car fired up for the first time tonight. Started right up no issues and seemed to idle ok but has a surge. Was wondering if someone could glance at my data log. I let the car idle and come up to temp. looking at the tables for fuel and timing im not...
  12. DemonGT

    Vacuum fittings on upper intake

    I need some vacuum adapters that are a 90 degree angle. It looks like there 3/8 size? The T fitting on the bottom, one side goes to my PCV in the pass. valve cover and the blue hose goes to the vacuum tree. I noticed a small amount of oil in the upper intake and on the upper plenum gasket. Is a...
  13. DemonGT

    Spartan Wide Band install

    If removing the stock computer and just running the MS and adjusting the timing in tunerstudio is an option then I will just go that route but I was under the impression I needed to know what the actual timing was set too and needed to input that into tunerstudio before going forward? I believe...
  14. DemonGT

    Spartan Wide Band install

    So i got the Spartan wired and installed but realized afterwards that i never checked my timing on the car. Years ago i removed the pointer to remove the timing cover and never marked where it was(adjustable pointer) and do not know for sure what my timing is set to exactly. I just set it by...
  15. DemonGT

    Spartan Wide Band install

    So looking at this diagram the bottom blue wire would be signal, top right would be ground and top left would be key power?
  16. DemonGT

    Spartan Wide Band install

    I pulled one of my O2s to wire up my spartan but years ago i used a non ford O2 and it has two black and one blue wire. What factory colors should they be?
  17. DemonGT

    Unneeded wires

    Thanks for all the good info guys, much appreciated.
  18. DemonGT

    Unneeded wires

    Yes, i know what it does. Im switching over to a Pimpxs and ditching the stock ECU. And yes...your right i am new to foxbody's.
  19. DemonGT

    Unneeded wires

    Would this still be the case with a fiber glass hood?
  20. DemonGT

    California special color choices?

    Wondering how big of a difference he upgraded brakes on the PP1 package makes over stock?
View older results
Top Bottom
Back
Forums
Menu