Search results

  1. M

    CAI, PULLEY suggestions???

    JLTCAI and some steeda pulleys and you'll be fine..
  2. M

    Clutch?????

    Yep, that you pry have a stock clutch and TOB that are going.. Time to set up and get something new.. As for the new clutch ?... The new DFX clutch is supposed to hold 1000 TQ, and that's where you get slip, not HP.. I'm gonna try it here shortly and it is also 26 spline..
  3. M

    Where do I get the best 03 cobra tune in Texas?

    Pretty sure Amazon is going to be in Texas this comming weekend.. You should give them a call..
  4. M

    01-----03

    You may have an extra 200 a month for mods, but for 200 a month, you're mods will most likely never add up to the power an 03 can make stock.. :nice:
  5. M

    University of Maryland Members...Check in

    hey all you md guys, you goin to the car show on campus this weekend?
  6. M

    Maryland Tuners?

    Amazon Racing in Edgewood, MD www.amazonracing.com
  7. M

    New Best in the Cobra - Vid inside

    Sure was...
  8. M

    New Best in the Cobra - Vid inside

    No cage... No solid.. I wanna take the IRS and 6 speed into the mid 10s with no nitrous.. May have to bite the bullet on the cage though..
  9. M

    New Best in the Cobra - Vid inside

    It's 100 stock rear except for MJ's IRS brace.. No bushings, no half shafts, nothing.. Worried, Heck yeah I'm worried.. That's why there was only a 1.85 60'.. That's why I'm doing lvl5's this week :cheers:
  10. M

    New Best in the Cobra - Vid inside

    60' - 1.82 1/8 - 7.32 mph - 101.29 1/4 - 11.18 mph - 129.52 http://s38.yousendit.com/d.aspx?id=30J6VNYP8QJW731IDRI9ED1WQ1 Whipple at 18 psi BFG Dr's Bassani Headers, catted midpipe, and cat back Amazon CAI SCT MAF Ported Stock TB 60 lb injectors Focus pumps
  11. M

    How much HP can a cobra make before requiring to use C16?

    Just for example, I'm at 580RWHP on a mustang Dyno, so about 700 at the flywheel, and I run 93...
  12. M

    '03 Cobra Mods - What Next?

    If you want to keep the warranty, then YOu may get away with an xpipe WITH cats. Don't get headers.. All it does is change the exhaust note, no real power gain on these cars.. WORTHLESS... and they are a pain in the rear to install. I should know, I got them.... Worst purchase I ever made...
  13. M

    Carroll Shelby...

    k
  14. M

    Stock pulley Cobra goes 11.36@121!!!

    That's the thing though, it's a solid axle car. These cars have amazing power, even from factory, but with the IRS, it's soooo hard to launch. Not saying this isn't awesome, but I think most of the best times come from people with solid rears.
  15. M

    04 cobra next mod

    You may see some torque differences from the stocker, but not much. I would have your friend check out amazon racings ported stock TB and pendlum. Also, a ported blower wouldn't be a bad idea, although he would need a new tune. People are seeing big numbers in the mid range just the the tB...
  16. M

    pro 5.0 or steeda tri-ax??

    Steeda and Pro 5.0 is like getting an apple or an .... apple.. they are so close to one another, you just pick a place and get the cheaper one. I went with pro 5.0 because it's steel instead of aluminum. I don't know much about the MGW other than it's quite as all get up, which is always a...
  17. M

    4.10's in an '03

    From what I have seen, the people with the stock gears are running fastest with these cars. 4.10s would make it so you can hardly drive it. If the install isn't a problem, go ahead and put them in, but just be ready to take them back out..
  18. M

    Ford Racing says Supercharger kit is coming!

    It all depends.. You should be albe to buy the roush and saleen superchargers and put them on the car and it be covered under warranty because they cover them if you buy the car with the supercharger on them.. just make sure Ford installs it!
  19. M

    The 2005 at SEMA

    That saleen engine looks sweet... Guess that shuts up all the people who said that the 05 won't be able to be supercharged!!!