Search results

  1. onefstsnake

    New Pics of the Coupe and New Wheels

    What about a steamer? I would cover all the electrical stuff. I dont have a pressure washer...
  2. onefstsnake

    New Pics of the Coupe and New Wheels

    Its not really hard, just need to think. Like routing the cables so they dont rub on sharp edges, solding the connections, finding good grounding spots, and mounting the box. Took me about 4 days, but I probably spent 3 days just looking at where to route the cables and where to mount the...
  3. onefstsnake

    New Pics of the Coupe and New Wheels

    Well I got the 99 Cobras. Almost no curb rash except for one small 1/2" spot. I still need to raise the rear a little so it sits even. And get new tires for the rear... Pep Boys tires suck. :notnice: Oh and new pics under the hood since the battery relocation. Needs some...
  4. onefstsnake

    another overheating thread....sorry need help

    I bought an AutoZone radiator a few years back. Under $100 and its got a lifetime warranty. My old radiator was getting rotted out and paper thin in alot of places. A new radiator will help. How old is the fan clutch?
  5. onefstsnake

    Lowering Spring Pic Database

    Steeda Sport Springs w/o isolators Note the rear has Weight Jackers so it might be a little different. 99 Cobras Weld Pro Stars
  6. onefstsnake

    Tryin to break into the 8's

    With the new tires you should be in the 8's I was running a simular setup and ran a 8.8 @ 79mph
  7. onefstsnake

    inspection sticker

    Ive read and heard that most aftermarket H/X pipes with cats dont last long. Last year I saw a 03 Cobra that had a catted Magnaflow X pipe. 10k miles on the cats and they were junk and basicly just blew out through the back of the x pipe.
  8. onefstsnake

    inspection sticker

    Same here in VA. A sticker isnt enough. The inspection station transmits the results to the DMV. Could be why the CarFax says I failed twice and that the car only has 12,000 miles... I guess the guy wasnt smart enough to think that its unlikely that a 1993 car has 12,000 miles, even when...
  9. onefstsnake

    Removing thread sealer from bolts

    +1 Leaves the bolts looking like new.
  10. onefstsnake

    factory temp gauge?

    I have the same problem, even after replacing the sender. never goes above 130* even with the parking lights on lol. But since I use an AM Water Temp gauge, i dont really look at the stock gauge anymore.
  11. onefstsnake

    '96-'04 Mustang electric fan into Foxbody?

    I dont see why any electric fan wouldnt work. Provided it moves enough air and it fits the radiator and clears the water pump pulley. I personally run a Taurus dual speed fan. Not sure what year or engine its from. I wired the low side to a single 30A Relay. On Hot (100*+) days it works...
  12. onefstsnake

    Throwing Both Lean Codes No Fix In Sight...

    sorry it wasnt actually RTV it was the Indian Head stuff. Just keeps the gasket from moving.
  13. onefstsnake

    Lets straighten out my suspension before I buy everything.

    Most people exagerate with the width of the 96+ spindles. They are about 1/4" wider per side. But if you compare them to a 94-95 spindle the steering arm on the spindle is straight 90*'s On the 94-95 the steering arm had a big bend it in, which will cause bumpsteer. I used the 96 spindles...
  14. onefstsnake

    Throwing Both Lean Codes No Fix In Sight...

    I guess it could be pulling extra air from the crankcase. Could explain why its burning a little oil, which it never has before. I really took my time with the gaskets making sure they were seated properly and even put a little RTV on them to hold them to the heads. And for the front and...
  15. onefstsnake

    Throwing Both Lean Codes No Fix In Sight...

    so what would cause this?
  16. onefstsnake

    Evacuating A/C

    All foxes came with R-12 :notnice: Ill be "converting" mine over soon
  17. onefstsnake

    What brand tools should i buy?

    Almost all Auto Zone tools are guaranteed forever. If you break it go get a new one for free. For my ratchets I buy Craftsman Professional stuff. Sockets are mostly Harbor Freight, cuz you can get a whole set for like $10 lol Stuff I only use a couple times a year I get from Harbor Freight...
  18. onefstsnake

    Lets straighten out my suspension before I buy everything.

    All you need is the SN95 ball joints with the SN95 Spindles. Go with the Maximum Motorsports CC Plates and Coil Over kit. As far as Tubular A arms, unless this is a track only car go with something that uses bushings. Spherical bearings transfere alot of vibration. With the 94-95...
  19. onefstsnake

    Throwing Both Lean Codes No Fix In Sight...

    Update: Changed the oil. Doesnt smell like gas. No coolant in it... No metal... Changed the plugs on bank 1. 2-4 look pretty lean (white) but not terrible. #1 plug was covered in oil or fuel maybe both... Checked all the vaccum lines and they have no cracks or holes... Checked the FP...
  20. onefstsnake

    My door mod.

    so what you just removed the pockets? Mine had half a dozen staples holding them on.
View older results
Top Bottom
Back
Forums
Menu