Search results

  1. onefstsnake

    What psi in ET street slicks?

    I assume your running tubes?
  2. onefstsnake

    Fuel pump relay for 93 lx location?

    just do a search for kill switch. There was a thread that said which color wire you needed to tap into.
  3. onefstsnake

    steeda rear strut tower brace

    probably and inch or two. Or just take the lining out...
  4. onefstsnake

    Where can I get the rubber boots for the doors?

    try a junkyard for a car with similar boots??? Trying to find new ones is going to be pretty much impossible.
  5. onefstsnake

    Alloy axles????

    I have their 31 spline axles in my car. Seem to work fine (havent broken). They were cheap. And they are made out of the same stuff Moser axles are. And actually the city,state on the box they came in is the same as Moser... Strange.
  6. onefstsnake

    Picture request: pics of your fabricated valve covers

    do any come with a baffle in them? Most of the fabbed covers ive seen done come with baffles or holes for a filler neck or cap. I like the look of them just dont want the hassle of oil going all inside the TB and Upper Intake lol
  7. onefstsnake

    hydraulic clutch conversion for 86 5.0

    a hydraulic system would be awesome. I drove my friends 04 Si Civic and I laughed so hard when I pushed in the clutch. He thought somethin was wrong. His pedal is like 5lbs compared to my 50lb CF clutch
  8. onefstsnake

    oil choice

    Hell I ran Castrol GTX for 2 years and this year ive been using Mobil 1 Full Syn. I have always used the Mobil 1 filters, bigger and heavier than almost anything out there lol I did buy a couple cases of Valvoline VR-1 though.
  9. onefstsnake

    Remember this picture?

    Saw this posted on a different site and I remembered it was a guy from SN that did this rolf...
  10. onefstsnake

    Tremec TKO install issue ?? pics

    Im not using the hangar mount. Its like less than 1/2" thick, shouldnt be a problem.
  11. onefstsnake

    Tremec TKO install issue ?? pics

    The shifter will sit quite a bit further to the passenger side. Dont worry its normal.
  12. onefstsnake

    Roller Rockers...

    well one will fit and one wont. Larger size is stronger... :shrug:
  13. onefstsnake

    Control arm bolts

    When I put new Control arms on mine I went to www.McMaster.com and ordered all my hardware. All 10.9 Zinc Coated stuff with Nyloc nuts. Not cheap but it will never rust. Edit. Here is the shopping list I had from their site. And for some reason BreezeAuto says its a 16mm bolt... I...
  14. onefstsnake

    E3 plugs for Fox 5.0L???

    Yup I stick with the Autolite 25's at just over $1 each and laugh at the Honda guys that buy $12 iridium plugs hehe...
  15. onefstsnake

    Heating Drag radials at the track....

    that would also depend on what tires your running up front. If your running anything other than skinnies, drive around the water and back into it so your front tires dont carry a bunch of water on the track.
  16. onefstsnake

    white foxes

    here are a few of mine that havent been posted already.
  17. onefstsnake

    Opinons On clutches?

    Im using a centerforce DF clutch with my TKO600. Pedal effort is the same if not better than a King Cobra. Smooth engagement, no chatter. Oh and the TKO600 feels like my T5 with a slightly stiffer shifter, probably since the trans is new.
  18. onefstsnake

    fuse keeps blowing

    I believe the turnsignals/hazards and brake lights (when you hit the brakes) are on a separate circut. My signals and brake lights still work. I think some water got up into some of the connectors that are in the passenger side fender well. I know there is a bunch of wiring up there. Im...
  19. onefstsnake

    going 331!!!

    seems like their quality has been down since their business has grown. I know a few guys that lost motors built by DSS Sure could be tuner error but when your oil sparkles after only 200 miles somethin aint right...
  20. onefstsnake

    Before and after pics of your mustang?

    yeah for some reason photobucket or stangnet didnt like 4 pics posted... so I hosted them from putfile
Top Bottom
Back
Forums
Menu