Search results

  1. 9

    New best with PI intake mod!

    Despite spinning completely through 1st and part of 2nd gear, I accomplished a new best time. Tires were Nitto 555's at about 23psi. Here are the stats: 60' - 2.107 1/8 mi et - 9.186 1/8 mi mph - 76.85 1/4 mi et - 14.229 1/4 mi mph - 98.05 Not too shabby given the crappy traction. I...
  2. 9

    This must be the best bang for the buck mod for Non-PI cars

    The next logical step for me will be PI cams. That will be a while before I get those though. After cams, its gonna be dyno tune time for me.
  3. 9

    This must be the best bang for the buck mod for Non-PI cars

    Took me about 5hrs total. This was messin with stuff that I wasn't sure how I should tackle. Like the dumb EGR in the way, etc. The other coolant sensor is in the side of the block. There is a little plug, you cant miss it if you were to look. It threads out, a bunch of coolant will dump out...
  4. 9

    This must be the best bang for the buck mod for Non-PI cars

    That 25hp was up towards redline. Peak hp gain was 15hp. It gained no tq peak to peak, but look at the gains farther towards redline. Crazy numbers for $100. I put a write up on www.modulardepot.com in the 2V section. Go print that puppy out, and throw the PI on that car. You are gonna crap...
  5. 9

    This must be the best bang for the buck mod for Non-PI cars

    Thanks for posting this here! The more people that know about it the better. Gotta love the gains on the top end of that graph too. 25hp/25tq at like 5600rpm. :D
  6. 9

    New PI intake for NPI heads available

    Check out my dyno numbers, and look at my mods. Tell me which part made the most power. :) For $100, the PI intake cant be beat. Oh yea, I am 20rwhp behind your claims, without PI cams, and without PI heads. Gotta love that. :nice:
  7. 9

    To All Those 96-98 Gt Owners!

    Mods are in my sig, along with my current best timeslie (minus a few mods), and my recent dyno run. The car feels 110% better than stock.
  8. 9

    Things I learned From Stangnet.

    Goodness, when will you guys ever learn. You leave the company making the last real American muscle car, to a company that makes its new GTO look like a Cavalier, and the new Vette look like some sort of funky drunk mans impression of the C5. So sad, enjoy GM craftsmanship. :rlaugh: :rlaugh...
  9. 9

    What details have you noticed on the 2005 V8 Stang?

    I would say with the technology of todays cats, and them being placed so close to the exhaust manifold, I think the new Stang will only have 2. Only time will tell though.
  10. 9

    Will I pass OBD II emissions?

    It just depends on how much they test. Here in AZ, they put a scan tool on the car, and if you have a check engine light, you immediately fail. Or if your car is in the "not ready" status, it also fails. You can get by if they dont look, and they dont do a sniff test.
  11. 9

    Any 94-98 stangs without spoilers?

    Maybe this will help........... No spoiler pic
  12. 9

    Got dyno'ed today!

    Grounding kits are for imports who think they gain 7hp from it. This is a little more serious than that.
  13. 9

    Got dyno'ed today!

    Can't tell ya yet. I want everyone to see the write up, and it be the first time for many to see the modification done. By then a lot of people might know about it, I dont know, I am takin my chances. Sorry to be like that, I just wanna make sure the dyno backs up my enthusiasm at this point.
  14. 9

    Got dyno'ed today!

    No problem, after that I have a not-so-popular mod I am going to be doing a write up on. You will like what you see, I do believe. :)
  15. 9

    Got dyno'ed today!

    In the next week I am planning on adding Steeda underdrives, Steeda timing adjuster, and Kirban FPR. Then off to the dyno to tune these 3 things in.
  16. 9

    Got dyno'ed today!

    Just had my baseline dyno performed today, and was very happy with the numbers. 211rwhp and 277rwtq Pretty impressive for what little I have done. Those are SAE numbers too. If anyone can post the graph, I would appreciate it, I only have it in the dyno viewer software. I cant save it as a jpeg...
  17. 9

    loud pop when opening door

    I noticed this on my 97 GT also. It was after a day of hard launches at the track with no subframes. I believe my car twisted just enough to throw off the door alignment just a tad. Might be the same in your case. Time for subframes before it gets worse!
  18. 9

    Performance Cam Recomendations

    Highly suggest VT!
  19. 9

    Ran a [email protected] 3.27 Gears, NA!!! 3476 lbs!!

    Whats the formula for calculating DA?
  20. 9

    4:10s and 245's traction?

    My traction was absolutely horrible with stock tires. My Nitto 555's helped quite a bit, and upper and lower control arm's helped a ton! Subframes are going on soon to further help traction, as I still break loose at about 3500 in first gear to redline. Remember, this is on a "wussy" 97 GT.
Top Bottom
Back
Forums
Menu