Search results

  1. I

    side exit exhaust

    yea like this
  2. I

    side exit exhaust

    they would probably look good on sombodys mustang but not on mine, thats more of a hot/rat rod kinda thing. + iwould probably burn my leg @ some point.
  3. I

    side exit exhaust

    got it final installed today. heres pics The area of the boom tube that is cutaway is for the leaf spring wanted to make sure it wasnt going to come in contact with the boom tube. made vid put on you tube not to sure if sound came out will post it later if it did. chris
  4. I

    side exit exhaust

    yea I hear ya on the compression @ 12 to 1 and a big cam, I run a solid roller with .660" lift on both exhaust and intake and I should be firing it up with the boom tubes installed tomorrow. I will get more pics up tomorow nite and will try a vid with sound too. would have had it done last week...
  5. I

    I'd like to introduce you to someone-it's ELEANOR!!

    it sure is refreshing to see a real elanore!!!! (sp)
  6. I

    posi rebuild help

    your correct you need to go with a smaller shim. Did you do the mod?? that leaves you with 4 each fiber disks on each side?? Chris
  7. I

    Just for chepsk8

    they dont call em cobras for nothing, she just got bit........... BY the SSSSSSSSSSSSSSSSSSSSSSSnake!
  8. I

    A Classic Mustang, is a Classic forever even with EFI

    I think is is utter blasphemy to put efi on a 289........ When you could stroke it add efi super/turbo charge it and put a small chain link steering wheel on it. I always say any one can restore a classic to its "origional" condition but it takes a real man to take a sawzall to a classic...
  9. I

    pics of a project basketcase

    the storie goes like this. When the shell was purchased it came with fiberglass rear fender flares. the previuos owner had already made the cut outs for the flares. but the saving grace was that the origional fenders were saved. so instead of going with the fiber glass we put the origionals...
  10. I

    Edel Carb

    see this is what I dont like about the edelbrock carbs. Did you check the float level? I am prety sure you have to take the top of the carb off to check the float level. Its suposed to come from the factory pre set. but I have seen a few that wernt adjusted properly out of the box and had...
  11. I

    Too much cam? Please help diagnose

    the car will be much eaiser to drive when you get some gears. high gear ratio large cam no good. do the brakes run out of vacuum now???? chris
  12. I

    side exit exhaust

    those are magna flow mufflers. http://store.summitracing.com/partdetail.asp?autofilter=1&part=MPE%2D14419&N=700+4294923429+4294922711+400636+115&autoview=sku started it with just the x pipe and the mufflers, its on the loud side but sounds bitchen!!
  13. I

    pics of a project basketcase

    that build took just over 3 months. I was just consulting on it. the owner didnt want the ducktail rear fender extensions. The car actually looks pretty good up close. We put a maer racing suspension with a panhard bar. the car will be used for open track events. dont have any interior pics...
  14. I

    side exit exhaust

    well i recieved the tubing I orderd from summit gawd I love them!!! Now I have the driver side mocked up looks like its gonna work. I had to notch the end of my tcp sub frame connectors and do some light massaging on the boom tube. I will have to add some kind of gusset later...
  15. I

    How to see if fuse in fusebox is getting juice

    one good place to use as a ground is the ignition key while in the ignition. Gator clip your multi meter (I perfer a testlight) ground lead to the key and find a fuse position you know for a fact is getting power and check it with your multimeter or test light to make sure the test...
  16. I

    Engine wont turn over

    when you say check all the valves what does that mean?? did you possibly tighten any of the polly locks???? this may be causing the valve of the tightend polly lock to be hitting the piston. also check the plugs for any nicks or funny out of place marks. do you know any one who has one of those...
  17. I

    Had to take some pics for the insurance company today and thought i'd share.

    who do you insure it through??
  18. I

    side exit exhaust

    I got mine off ebay for 150 bucks I just typed in nascar in automotive parts and all kinds of super bitchen parts came up. Dr gass sells them for 269 each thats with mufflers actually it is a muffler or you can get this one for 209 each these are not finished still need welding and coating.
View older results
Top Bottom
Back
Forums
Menu