Search results

  1. tdaily2

    Installed brakes - problem now I think

    this is the car that you where having provlems getting them to go on and you cut down part of the pad on one side....your parking cable may be to tight or it could be a caliper that is badis this the first time you have put brakes on...i'm not asking to be a smart ---
  2. tdaily2

    Drilling through trunk- Tips needed please

    just tape off where it need to go and make sure that it is lined up and that way you can line it up and make your lines and then if it is wrong yo have not drilled a hole and then when you are happey with the placement of the hole get a drill just do not push it thou just put a little push to it...
  3. tdaily2

    where to get an IRS

    http://www.stangparts.com/home.cfm?section=products/index they are a good comp to work with
  4. tdaily2

    #$%@ Starter Bolts!!!!

    you can take a long ext and reach the top bolt it is not hard to get
  5. tdaily2

    Lowering Springs Dangerous???

    1st off all it sounds like the guy is trying to get out of it and 2nd of all what is on a race car???? yes lwering spings and why ?????to help keep control of the car.....why not change it yourself
  6. tdaily2

    K member question

    so what was wrong with your k mim? if you want you car back to stock then i would use stangparts.com i use them all the time and they are good to work with and they get the parts out fast
  7. tdaily2

    K member question

    http://www.stangparts.com/
  8. tdaily2

    deep dish bullits

    where did you get them
  9. tdaily2

    A Front End Issue?

    look at the hub and see if the bearings need to be changed you may have to change the spindle...get he front end off the ground and try to turn the wheel and see if there is any side to side play
  10. tdaily2

    Painted Stripes

    hey 06gt it looks good
  11. tdaily2

    cobra swap

    the easy way to do the swap is to drop the motor with the k-mimber and the barkes and trans then that way all you will have to do is put the car around the motor and go not have to work over the top of the finders
  12. tdaily2

    04 paint changing color?

    what the problem is the parts on the car are not panted by the same batch of primer or paint the vindor that puts out the part paint them and they may not put on as much paint and then you will have primer bleed thou and that is what you are seeing you can caly it and will not help ot os just...
  13. tdaily2

    Auto Meter Replacement Inst. Panel

    http://www.autometer.com/download_instruction/563a.pdf
  14. tdaily2

    coolant in the spark plug cylinder ?????

    when the parts where changed out could be that who ever took the intake off ot spilled down there and just did not burn off
  15. tdaily2

    Top Tranny bolts... 98'

    if you are having problems with it not wanting to loosen then you could get the motor to a point to start it and then let it heat up and then drop the trans suport and lower the back of the trans and then hit it with the wrech that you want to use should work
  16. tdaily2

    BBK LT install progress report: Day 2

    i have put a set of mac lt and it is not easy you have to move the motor from one side to the next but one thing make sure to start on the pass side that way you will be able to get to all the bolts
  17. tdaily2

    Installation time?

    it can be done all 4 in 1.5 h but you have to be getting after it i have done this not once but twice and that is not but with hand tools
  18. tdaily2

    trunk won't open

    has the car been wrecked is so they may have pulled the deck lid off another car and never put the lock to you car in
  19. tdaily2

    Rear end gear swap changes emissions???

    you should not have a problem. i would not have the dlr put it in
  20. tdaily2

    t5 swap questions-wiring

    it is that has nothing to do with the trans
Top Bottom
Back
Forums
Menu